Reviews
Fits: SUZUKI RMX450Z, SUZUKI RMX450Z, SUZUKI RMX450Z, SUZUKI RMX450Z, SUZUKI RMX450Z, SUZUKI RMX450Z, SUZUKI RMX450ZL8, SUZUKI RMX450ZL8, SUZUKI RMX450ZL9, SUZUKI RMX450ZL9
Great product
Good quality, conform to the origin Fit very well for 450 Suzuki rmx to install speed sensor with extrem ease. Send very fast View detail
Fits: SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI B-KING
To replace the clutch cover
I bought this as a spare when replacing the clutch cover on my GSX1300R HAYABUSA.
When replacing the OEMClutch with a transparent Clutch cover, I thought it would be a good idea to replace the Gasket as well, so I bought a spare and didn't bother waiting to replace it.
There is also an Other Brand Product, but I got this OEM Product because it is not expensive and has good accuracy.
For SEA BASSOEM, I don't think there is anything particularly good or bad about it.
I have not put it on yet, but it seems to work normally.
It is also used in new cars, so you can be sure that it is OEM! If you think so, please come here!
View detail
Fits: SUZUKI GSX-S750AL9, SUZUKI GSX-S750YAL9, SUZUKI GSX-S750ZAL9, SUZUKI GSX-S750ZL9, SUZUKI GSX-S750AL8, SUZUKI GSX-S750AZL8, SUZUKI GSX-S750L8, SUZUKI GSX-S750ZL8, SUZUKI GSX1300RAL9, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI DR200SE, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R
Bolt for fixing CHOINORIFootCowl
[How is it used?
FootCowl by SUZUKI/CHOINORI (Footrest) to be Bolt to fix to the Frame.
I purchased 4 OEM Parts because they were missing when I purchased the vehicle.
How was your experience with it?
OEM Parts for your peace of mind. No problem.
How did it compare to other products?
As the part number says, it is M6×16mm Bolt, so you can get it at Home centretc.
However, OEM Parts are also not that expensive, which is good.
[Points to note]
Care should be taken not to lick it with Overtorque.
View detail
Bolt for fixing CHOINORI's Rear Fender
[How is it used?
Bolt to fix SUZUKI/CHOINORI Rear Fender (Screw) It is
The + head got licked when removing the Rear Fender, and I had to use an extractor to remove it, so I purchased this 1 pc version.
How was your experience with it?
I can get into the new one easily without worrying about licking it.
The shine is different compared to the original Screw.
How did it compare to other products?
I think Home centeretc. sells Screws of the same standard.
OEM Parts are not expensive at all, so it is RECOMMENDATION to buy this one.
[Points to note]
Care should be taken not to lick it with Overtorque during installation.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
Air Valve for CHOINORI Wheel
[How is it used?
Air Valve was cracked when SUZUKI/CHOINORI replaced the tire, so it was replaced with an OEM Product.
Was the one you received as per Image?
It was just as Image.
We also considered Other Brand Product, but the Gold price was not much different, so we chose OEM Product.
This PN is the official number, but 43130-24A11-000 is the replacement.
How was your experience with it?
There were no problems with use at all.
It is a common RubberValve, but it is durable and of good quality.
[Points to note]
When passing the air valve through the wheel, it is necessary to lubricate it firmly with tire wax or silicon spray to prevent cracking.
How did it compare to other products?
There are many other inexpensive Air Valve etc., but I have no problem with this one because it is cheaper and is an OEM product, so the quality is good.
View detail
Fits: SUZUKI GS500E, SUZUKI GS500E, SUZUKI GS500E, SUZUKI GS500E, SUZUKI Katana (GSX600F), SUZUKI Katana (GSX600F), SUZUKI Katana (GSX600F), SUZUKI Katana (GSX600F), SUZUKI Katana (GSX600F), SUZUKI Katana (GSX600F), SUZUKI Katana (GSX750F), SUZUKI Katana (GSX750F), SUZUKI Katana (GSX750F), SUZUKI Katana (GSX750F)
Air Valve for CHOINORI.
[How is it used?
Air Valve was cracked when SUZUKI/CHOINORI replaced the tire, so it was replaced with an OEM Product.
Was the one you received as per Image?
It was just as Image.
We also considered Other Brand Product, but the Gold price was not much different, so we chose OEM Product.
Item number:43130-24A00-000 is the authorized PN, but this is a replacement.
How was your experience with it?
There were no problems with use at all.
It is a common RubberValve, but it is durable and of good quality.
[Points to note]
When passing the air valve through the wheel, it is necessary to lubricate it firmly with tire wax or silicon spray to prevent cracking.
How did it compare to other products?
There are many other inexpensive Air Valve etc., but I have no problem with this one because it is cheaper and is an OEM product, so the quality is good.
View detail
Circlip for CHOINORI front sprocket
[How is it used?
It will be a circlip to fix the front sprocket of SUZUKI/CHOINORI.
Was the one you received as per Image?
It was just as Image.
Circlip replaced an existing item that was not known when it was replaced due to wear and tear.
How was your experience with it?
Since it is not performance-related, there is no particular change before or after the replacement.
However, it is effective in that it eliminates the risk of cracking.
[Points to note]
There are no areas that require special attention.
How did it compare to other products?
There is no Other Brand Productetc., so this one, OEM Product, is required.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS
Prevents Oil leakage.
The so-called DrainWasher.
If the washer, which keeps the oil sealed, is damaged, it can cause oil leakage.
In the unlikely event that the DrainWasher is crushed too much and engine oil is added, all the engine oil will flow out and be wasted.
What is DrainWasher? ]
DrainPacking is a part that is mainly used for oil extraction bolt of automobiles, and is inserted between oil pan and drain bolt to improve sealing and prevent oil leakage. 。 Since the shape differs from manufacturer to manufacturer, various types are available for each company. 。 Once used, it is deformed and must not be reused.
→Drain bolt crushes when tightened and acts as a seal between Bolt.
[The role of the DrainWasher is].
■DrainWasher, which is the focus of attention when changing Motorcycle Oil, differs from them in its role of increasing confidentiality and preventing oil leaks.
Basically, it cannot be reused.
Replace every time when replacing Oil.
Suppose we continue to reuse DrainWasher as is.
The following dangers may also arise
[Possible hazards].
Since the DrainWasher will no longer be sealed.
→ Inevitably, Oil leakage will occur.
→ White smoke while driving or Engine does not run well.
→ leave it alone and Oil will be low.
→Engine oil can become very hot and damage the Engine.
In the worst case scenario, the Engine will have to be replaced, so the DrainWasher is a very large component.
The replacement procedure, by the way, is done at the time of oil replacement.
First, the car body,
*Prepare an oil pan under the Engine while the car body is cold.
Loosen the drain bolt.
Counterclockwise will disengage.
It is attached to the underside of the Large Body, Engine, and Crank.
↓
(2) Remove the Oil.
Remove the drain bolt by turning it slowly counterclockwise by hand.
Washer is attached to the drain bolt.
This Washer becomes the DrainWasher.
↓
(3) Engine oil flows vigorously at first, but gradually the flow weakens and the oil in the engine is let out by tilting the body of the vehicle to let the oil fall out.
↓
(4) Replace the washer attached to the drain bolt with a new washer.
If you remove dirt (oil adhesion) from the drain bolt at that time, you can get a good result.
↓
(5) When the bolt becomes a drop, insert the drain bolt with the washer attached and tighten it by turning it clockwise with the Glasses Wrench.
↓
?Tightening Torque is 30-40N-m.
The feeling of turning off a faucet with one hand as hard as you can. 。
Be careful not to tighten the drain bolt too hard or the oil pan may be damaged.
↓
(7) After tightening the bolts, wipe the dirty areas around the drain bolts with Parts Cleaner and Dustcloth.
[Notes]
When removing the drain bolt, the MONKEY Wrench→○Glasses Wrench is recommended because it is longer and requires less force than the MONKEY Wrench because of its length. 。
The "Drain bolt" can be tightened "clockwise " and loosened " semi-clockwise. It is possible that you are actually tightening the screws while trying to remove them without realizing it. (From experience) Check before applying force.
DrainWasher should be replaced every time.
And then, substitute diversion with a car model-specific or size-matching one.
The DrainWasher fills the gap between the drain bolt and the engine, and should not be reused because it collapses under tightening to maintain a tight seal.
It is modest, but it is really a Large cut.
View detail
Fits: SUZUKI Gixxer, SUZUKI Zixer(150)
Air filter installation is quite large
As an air filter, it is a very ordinary 3, but 5 is because it is affordable and very ordinary.
The replacement procedure for the pre-2020 model can be found by Googling, but the replacement procedure for the post-2020 Gixxer 150 cannot be found by Googling, so I will describe it here.
(1) Remove the in-hemp palm clamps from the harness and rubber sheet to facilitate work.
The top two are easy, and the Right Side is by turning over the Rubber sheet. The problem is the yellow color of the lower side.
?Insert and remove the Driver's shaft from the depression where it enters the Tail cover; the Screw will fall completely out and down. It is wise to pinch it with the Tweezers before it is about to come off. the ground without getting caught in the Cover or anything else when it falls out.
When the screws on the front side cannot be accessed by shifting the harness, the screws on the side cover can be removed by removing the screws, pulling them slightly toward the front, and making space for the driver to be inserted.
(5) Remove and replace the collapsed packing on the lid side and the box side as it looks like a drill, and place the air filter in the box.:Set feeling and not hooked, so I put it down.
(6) Attach the two screws with yellow color circle on the bottom of the lid side, and carefully insert the lid from the front to prevent the screws from falling off. If you have a super strong magnet driver, you may be able to put it on afterwards and insert it through the narrow gap, but it seems to be very difficult.
(7) Pattern and Quantity:Since it is not a mechanism that can be set, the screw holes must be aligned and the lid and box must be set so that the front and rear quantities are well aligned.:Pair (for Left and Right) While moving the screws to the upper side, check the position of the Screw holes and temporarily fix the upper Screw. Before and after thisQuantity:Pair (for Left and Right) You might have a pretty good hunch that shaking it up to
(8) Align the screws on the lower side with the screw holes, and insert the screwdriver through the slit as you did when you removed the screw.
Tighten the screws on the side cover and put back the inHemp palmock to finish the work.
If you do this work often, you may get used to it and be able to do it in about 20 minutes, but if you fall into a screw or some other strange place and get stuck, it is Large strange to take it out. I think it took me about an hour to do Small because I had to be very careful.
Once I do it once, I might be able to make it a little smoother next time, but it's hard to do anyway.
It is a good Element to remove it rather often, but you may not want to do this step unless you are in a desperate situation.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS
OEM Parts, so nothing is amiss.
OEM Parts, so you can be sure of the quality. It may also be cheaper than Other Brand Products. If you don't have any special requirements, we recommend you to use OEMFilter.
The driver is located in a rather troublesome place on the GSX-125Series, but it is not a problem in the sense that it is not something that needs to be replaced often. You will need to have the right tool for the job.
View detail
Fits: SUZUKI SV650, SUZUKI SV650, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S750ZL8, SUZUKI GSX-S750AZL8, SUZUKI GSX-S750L8, SUZUKI GSX-S1000AZL8, SUZUKI GSX-S1000FAL8, SUZUKI GSX-S1000L8, SUZUKI GSX-S1000ZL8, SUZUKI GSX-S750AL8, SUZUKI GSX-S1000AL8, SUZUKI SV650XAL9, SUZUKI SV650XAL9, SUZUKI SV650XAL9, SUZUKI SV650XAL9, SUZUKI SV650L9, SUZUKI SV650XAL9
Even if it's your first time, just look closely at the structure.
It is an OEM Product and I have no complaints. The gsxs125 is a Shift rod Quantity:Pair (for Left and Right) I have an identical Dust cover on a 3.5" board that cracked at about the same time, so I think it would be a good idea to buy two or three of them. It is not so difficult to replace the cover if you look at the structure carefully and understand it, and it would be good to have a marker to mark the Shift Pedal or Nut so that you can put it back in its original position. Wrench and Grease are all you need. View detail
Fits: SUZUKI SV650, SUZUKI SV650, SUZUKI GSX-S750, SUZUKI TU250XL9, SUZUKI TU250XL8, SUZUKI TU250X, SUZUKI TU250X, SUZUKI TU250X, SUZUKI TU250X, SUZUKI TU250X, SUZUKI TU250X, SUZUKI SFV650A, SUZUKI SFV650A, SUZUKI SFV650, SUZUKI SFV650, SUZUKI RV200L9, SUZUKI RV200, SUZUKI GZ250, SUZUKI GZ250, SUZUKI GZ250
Used for VOLTY
I bought a used VOLTY250. something is wrong with my Left hand.
Clutch lever is wobbling up and down, replace lever.
It has improved a little, but still wobbly and uncluttered.
Upon closer inspection, the back side was also worn out, so the entire assembly was replaced.
The original is 57500-25D00, but 25D00-25D04 seems to be common.
I ordered it in 25D03 but when I looked at the box it was 25D04.
In comparison, Lever is about 1 cm longer and sticks as it is.
The top and bottom 2 cm wobble is now about 5mm.
I did a test run and it looks good. If you are interested in this product, please replace it.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI Gixxer, SUZUKI Zixer(150), SUZUKI LETS, SUZUKI LETS, SUZUKI LETSBasket, SUZUKI LETSBasket
It's good to be Stock.
It is what is called a drain bolt.
The price of this small part is only about 100 yen, but if the drain bolt is damaged, it will cause oil leakage. If you forget to tighten the bolt and fill the engine with engine oil, all the engine oil will flow out and be wasted. A bolt is just a bolt, but a bolt is just a bolt.
What is Drain bolt? What is a drain bolt?
Drain bolt is a bolt attached to the oil pan at the bottom of the car. 。 It serves as a plug to prevent engine oil leakage from the oil pan. When changing engine oil, the drain bolt can be removed and the old engine oil can be drained out.
The role of the Drain bolt is...
The most often heard in the maintenance of motorcycles. "Drain bolt." 。
A drain bolt is attached to a fuel tank or oil pan, Screws to block drainage openings for engine oil, etc. It is
Unlike Drain Washer, Drain bolt does not need to be replaced every time, but in my case, I replace it every 4 to 5 years.
The lid that seals off the oil is exposed to the oil, and I want to make sure that the screw pile doesn't collapse due to the garbage in the oil, etc. And the oil gets hot while running.
Drain bolt should be replaced when replacing oil.
By the way, the procedure for Oil replacement.
First, please facilitate Oil pan under the vehicle body and Engine.
*Car body should be cold.
Loosen the drain bolt.
Counterclockwise will disengage.
It is located on the underside of the Large body, Engine and Crank. If you are not sure, please refer to the Service Manual or Instruction Manual of the vehicle body.
↓
(2) After confirming that the Oil comes out, remove the Bolt by turning it slowly counterclockwise by hand.
↓
(3) The engine oil flows vigorously at first, but gradually the flow weakens and it starts to drip down. However, it is possible that the oil in the engine is not completely drained out yet, so the oil in the engine is drained out by tilting the car body.
↓
When the bolt becomes a drop, insert the drain bolt and tighten it by turning it clockwise with the Glasses Wrench.
Before doing so, check the condition of the removed drain bolt; if the screw thread is missing, replace it; if it is large and sturdy, tighten it with Drain Bolt Washer.
↓
?Tightening Torque is 16N-m.
The feeling of turning off a faucet with one hand as hard as you can. 。
Be careful not to tighten the drain bolt too hard or the oil pan may be damaged.
↓
(6) After tightening, clean the dirty parts near the drain bolt with parts cleaner and dustcloth.
[Notes]
The position of the drain bolt is at the bottom of the engine, so it is often difficult to loosen the bolt, and if you try to loosen the bolt with a monkey wrench, you may lick (crush) the bolt head.
The Monkey Wrench→○Glasses Wrench has a longer length and requires less force than the Monkey Wrench because of its length.
[Extras.
I experienced this when I started to do maintenance myself.
The drain bolt is stuck and won't come off! What a surprise (laughs).
Even in such a case, don't panic (laughs).
The drain bolt can be tightened " clockwise and loosened " semi-clockwise. It is possible that you are trying to remove the screw without realizing it, but in fact you are tightening it. Before applying force, check the tightness of the strap.
There are external products such as with-magnet drain bolts that adhere to the engine's gold dust, but they are expensive, and I think it would be wise to stock OEM drain bolts if you change oil regularly.
By the way, the part number is
01500-1016A-000 It's only $55.00!
The drain bolt washer should be replaced every time the bolt is tightened.
View detail
Fits: SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125 ABS 100th Anniversary Collar, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125 ABS
This is also consumable.
The car has reached 5,000 km on the odometer and is being replaced.
Replaced OEMAir cleaner with OEMAir cleaner as is.
If you have ever driven a car or motorcycle, you have often heard this word. Air cleaner
The engine produces a mixture of gasoline and air taken in from the outside, which is sent to the piston to drive the engine. The air needs to be filtered because there is a risk of foreign substances if it is sucked in as it is.
→Air cleaner role.
[Types of air cleaners
Dry." When Screwcass formula." There are two types of
(i) Dry." ‥
Dry filter paper or non-woven cloth is used, and when soiled, the Element can be cleaned by blowing Compressor air from the inside to the outside.
The Element is bellows-shaped with a mountain fold and a valley fold, but since more dirt accumulates in the valley portion when viewed from the intake side, Dust may pop out on the Sheng Large when air blowing.
→GSX-R125 is this Type.
(2) Screwcass formula." ‥
Like Sponge Element filter oil, the oil on the surface of the element adsorbs even the smallest dust particles, but since the oil is blown away by air blowing, cleaning is prohibited in principle. When the time comes to replace the oil, we will replace it without hesitation.
Do I need to replace the air cleaner?
Air cleaner (Air Filter) to beautify the air entering the Carburetor or Injection./Air Element) may malfunction if not replaced in moderation.
What if the air cleaner gets dirty?
Dirty air cleaners reduce the amount of air that is sucked in, causing the engine to malfunction, resulting in reduced fuel economy and acceleration performance.
As an example, if the sponge of a wet filter is ragged, too much air will be allowed to enter, resulting in higher combustion temperatures and possibly destroying the engine.
Also, in the injection systems used in recent motorcycles, if the intake air volume decreases due to a plugged air filter element, the fuel injection volume is corrected accordingly, and the air-fuel ratio may remain unchanged. However, even if the plug is not covered, a decrease in air volume will naturally lead to a decrease in power, so the condition of the AirFilter element is still important.
How often should I change my Motorcycle's air cleaner?
The air cleaner, which removes air pollution, should be replaced after approximately 5,000 km, and driving with a dirty air cleaner can reduce fuel efficiency. 。 There are two types of air cleaners, wet and dry, and the replacement time for both types is approximately 5,000 km.
Based on the above ...
Why did you choose OEM Air cleaner again this time?
Fat:Almost no external air cleaner for GSX-R125 has been released (laugh).
There is a backdoor method for OEMs to increase intake airflow by removing the air cleaner's punching with a nipper or something, but I'm afraid of the risk (lol).
◯Fearing that the setting of →Injection, which raises the intake air volume, may become incorrect (changing the air-fuel ratio), which may affect fuel economy and driving performance.
It is not used for racing, but for touring and other main purposes.
How to exchange
Remove the Seat. You can use the Hexagonal Wrench, an automotive tool, to remove the Seat.
↓
(2) Remove the Battery. When you remove them, do so in the order of Minus→Plus.
↓
(3) Pull Fuse BOX and Wiring out of the way.
↓
Remove the lid of the Air Cleaner Box with Phillips Screwdriver.
↓
(5) Remove the old Cartridge-type air cleaner.
↓
(6) Place the new air cleaner in the box.
↓
(?) ?→? Return to the bottom in this order to complete the process. 。
[After exchange]
◎Engine blowout has been lightened. 。
◎Fuel economy also improved to 42 km→46 km.
◎Idling is also stable.
If the vehicle is equipped with a carburetor, it is possible to manage even if the intake air volume is increased by applying carburetor settings, etc. But when it comes to injections, I think it is not possible to cheat because they are very precise.
The AirFilter element→ is just as important for motorcycles as the mask for people. It is true that more intake air = more power, but I think it is necessary to be aware of the risks associated with this.
View detail
No doubt, but be careful installing it.
Purchased for k6. As soon as I replaced it, the symptoms improved, but I made a mistake in the cord routing and it interfered with the GEAR and broke the wire. I had to buy another one because I couldn't fix it even after reconnecting the wires. Be careful about amateur maintenance! View detail
Fits: SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI Intruder (VL1500B), SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250
ดีส่งไวพนักงานดูแลดี ไว้จะมาสั่งใหม่อีกนะครับผม ขอบพระคุณคร้าบบบบบบบบบบบบบบบบบบบบบบ View detail
Fits: SUZUKI GSX-S1000F ABS, SUZUKI GSX-S750 ABS, SUZUKI GSX-S750 ABS, SUZUKI RM85L
ดีส่งไวพนักงานดูแลดี ไว้จะมาสั่งใหม่อีกนะครับผม ขอบพระคุณคร้าบบบบบบบบบบบบบบบบบบบบบบ View detail
Genuine Suzuki Oil Pan Gasket for GSX-R1000
This bike had a service not so long ago but the mechanic failed to seat the oil pan gasket correctly and in turn, this started leaking along the left side. Obviously, this is not a good situation so a new oil pan gasket was needed in a hurry. Finding the right gasket was not hard for this GSX-R1000 as there are a lot of these bikes around and need OEM parts for servicing etc. I checked Suzuki schematics and found the right one no problem. Webike already had this is stock so I would not have to wait for them to get it. The price was really good and better than my local Suzuki dealership could match. With a couple of other gaskets for this bike, I had them all shipped toghether and by EMS as they just get the delivery to me fast. It took like 5 days from being shipped for this to arrive with me. The gaskets were all nocely kept flat so not to distort them. They all came in the standard Suzuki packaging too. This gasket covers a large area but there is a lot of cut outs for obvious reasons. Every single one aligned perfectly and without any problems. I made sure the oil pan was torqued correctly and seated as it should be. Now there are no leaks and this bike should be good until the next oil change or service. Thanks Webike, very pleased with this purchase. View detail
Fits: SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600Z, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R750
Great product
Product original and match perfect in my motorcycle. The product was well package and arrived well.When I asked the support teams was ready to answer my questions and sent me the invoice fast. View detail
Fits: SUZUKI RM85L9, SUZUKI RM85L8, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85
ถึง ทีมงานFฃWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail