Reviews
Fits: SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R, SUZUKI Boulevard M109R
I bought extra. All I need is 1 pc.
[How is it used?
When I bought SUZUKI/CHOINORI at a junk shop, it did not come with Throttle, so ScrewBolt of Holder was missing along with it, and I looked up the model number on Net and found Quantity.:I bought 2pc
How was your experience with it?
Quantity:I purchased 2 pcs but only needed 1 pc.
Throttle holders have a step inside so that screws of different lengths can be matched to the quantity.:You will need 2pc.
However, this product is Quantity:Since the lengths of the 2pcs were the same, one of them could not be tightened to the end and the Holder was not properly secured to the Handlebar, causing it to be misaligned.
Well, it's CHOINORI, so it doesn't matter.
How did it compare to other products?
I guess I should have checked the length and bought it at Homesense Bolt or POSH or something like that.
If anything, the price was lower, which was helpful.
[Points to note]
+Screw so be careful not to lick it.
View detail
Fits: SUZUKI GSX-R1000AM0, SUZUKI GSX-R1000RAM0, SUZUKI GSX-R1000RZAM0, SUZUKI GSX-S1000AM0, SUZUKI GSX-S1000FAM0, SUZUKI GSX-S1000FZAM0, SUZUKI GSX-S1000SRQM0, SUZUKI GSX-S1000ZAM0, SUZUKI GSX-R600L9, SUZUKI GSX-R750L9, SUZUKI GSX-S1000AL9, SUZUKI GSX-S1000AZL9, SUZUKI GSX-S1000FAL9, SUZUKI GSX-S1000FYAL9, SUZUKI GSX-S1000FZAL9, SUZUKI GSX-S1000YAL9, SUZUKI GSX-R1000AL8, SUZUKI GSX-R1000L8, SUZUKI GSX-R1000RZL8, SUZUKI GSX-R600L8
Genuine Kawasaki Clutch Lever for NINJA GSX-R1000 2015
Webike have a lot of help tools available so you can find the correct part pretty easily to add an OEM Kawasaki Clutch Lever to the GSX-R1000. Correct part number found and added to my basket. I generally have more item in my basket ready to order and this was another that was added. I do like to order more than one part at a time as this cuts down the shipping if I was to order items individually. The courier I chose was EMS fast service. They do what they say and get your order to you very fast. No really sure if I have ever had an order delivered by this service that has been any longer than 5 days. This arrived at my door in 5 days as expected. This makes me happy and also my customers and friends happy too. The order was all packed really well as always from Webike warehouse staff. The outer box was sealed with tape so nothing could be lost whiclst in transit. The inner of the box was all neatly packed and filled with additional bubble wrap. Everything was nice and snug but not too tight to damage anything. All the parts and even some of the small parts arrived with me in 100% perfect condition. The lever is a lovely colur black, but not glossy balck, more like a satin. The finishing is perfect, no sharp parts and all the the groove where the cable sits in is also very well machined out. The clutch fitment tab is noce and smoothly finished. Even the bolt hole is very well machined. What's not to love. All fitted in super quick time and this meant my friend could get back out on his bike in just a week from the accident. Very happy with purchase. Thank you Webike for the great services you provide as always. View detail
Fits: SUZUKI GN125E, SUZUKI GN125E, SUZUKI GN125E, SUZUKI GN125E, SUZUKI GN125E, SUZUKI GN125E, SUZUKI GN125E
SUZUKI OEM Motorcycle parts Lever, Brake (Black) 57421-13001-000
The part arrived quickly with very fast shipping looking great The black color is just like the factory color perfect match It was really, really easy to assemble the part and it fit exactly on the chassis of the motorcycle I waited a long time to find this part. I only found this part at this price on this site. Thank you. The delivery was really fast. The black color is very high quality Very easy installation. View detail
Fits: SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE
SUZUKI OEM Motorcycle parts Lever, Clutch 57620-20A02-000
Very easy installation. The part arrived quickly very fast shipping looking great The black color is just like the factory perfect match It was really, really easy to assemble the part and it fit exactly on the chassis of the motorcycle I waited a long time to find this part. Thank you. The delivery was really fast. The black color is very high quality View detail
Fits: SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR250SE, SUZUKI DR250SE, SUZUKI DR250, SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR250SE, SUZUKI DR250SE, SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350
Clutch Lever Boots
Rubber cover to cover the clutch wire adjuster.
Although we did not use it this time, it is truly a Universal Product.
View detail
Fits: SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE
The clutch part was bent so I bought it.
The clutch part was bent so I bought it.
The product is in good condition and the delivery is fast. I will use it often
I was looking for a genuine 2007 DR650SE product, but there was no cheaper place than here. I use it every time I purchase a product, and the site is very reliable, the product is in good condition, and the delivery is fast. There has never been a misdelivery. We will use it often. -------------------------------------------------- -------- The clutch part was bent and I bought it. The product is good and the delivery is fast. I will use it often I was looking for the 2007 DR650SE genuine product, but there was no cheaper place than here. It is used every time to buy a product, and the site is very reliable, the product is good and the delivery is fast. There is no misjudgment. I will use it often. Powered by Google Translator
View detail
Fits: SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman
New brake switch
Due to a small off this got damaged, do not ask me how that happened as it has never happened before even with bigger offs. Anyway, I found the part by using the Suzuki schematic which you can find on the internet. The cost was very good indeed and better than I have seen locally. Along with other item in this order the shipping was very cheap. I had a lot of small items in this order!. From ordering to the actual delivery to my door took just over a week. Brilliant. The finish of the switch looks great but you can only tell if it's good until after fitted and trying. Took literally minutes to fit. All works as it should and I am one happier biker. Great service Webike, keep it up View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI GSX1300R
Genuine Suzuki lever
My old one was damaged in the small off I had and rather than buy expensive or really cheap aftermarket, I decided to go for the OEM levers. The lever was pretty good in price although you could get a cheaper aftermarket but then you would be wondering if it would fail at any point. You really do not want a brake lever to fail when you might need it the most. Shipping was good and fast, arrived in just under a week. All fitted really well and the finish was perfect. Thank you Webike, great service View detail
Fits: SUZUKI GSX-R1000AM0, SUZUKI GSX-R1000RAM0, SUZUKI GSX-R1000RZAM0, SUZUKI GSX-R600L9, SUZUKI GSX-R750L9, SUZUKI GSX-S750AL9, SUZUKI GSX-S750YAL9, SUZUKI GSX-S750ZAL9, SUZUKI GSX-S750ZL9, SUZUKI SV650AL9, SUZUKI SV650L9, SUZUKI SV650XAL9, SUZUKI GSX-R1000AL8, SUZUKI GSX-R1000L8, SUZUKI GSX-R1000RZL8, SUZUKI GSX-R600L8, SUZUKI GSX-R750L8, SUZUKI GSX-S1000AL8, SUZUKI GSX-S1000AZL8, SUZUKI GSX-S1000FAL8
New throttle grip
After my bike got some damage from a small off this grip was also damaged so decided to go for the genuine Suzuki one. The price was really good and better than I can get locally in the UK. Shipping was reasonable as I got with other items. SHipped by Fedex and arrived within a week. Wow, how good is that!. All items in teh order were packaged and wrapped really well so no problems with that at all. I am frustrated at the fact I never discovered Webike before now. If I had only knew ordering was so easy from here, I would have used them years ago. All in all, the service received was excellent. Keep up teh great work Webike View detail
Fits: SUZUKI RM85L9, SUZUKI RM85L8, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85L
Installed in the hope of preventing dust and moisture from entering the Clutch Cable.
[How is it used?
I've been using it for about 6 years, including before the diversion (but not during storage).
Was the one you received as per Image?
(Omitted because I appropriated the one used in the Motorcycle I used to ride)
How was your experience with it?
The 400X did not have a Dust cover on the Clutch Cable.
When I was thinking what to do, I thought that I could use the dust cover of SUZUKIOEM Parts which I kept. When I was thinking what to do, I thought that I could use the dust cover of SUZUKIOEM Parts.
I actually installed it and it just fit to 400X (^_^)
It does not interfere with the hand guard and I have been using it for over 5 years without any problems.
I'm glad I installed it because it also covers the base of the Clutch lever.
I think it is preventing dust and moisture etc. from entering the Clutch Cable (Quantity):(See the photo posted in 1pc. eyes)
These parts have been stored in a tool box for almost 20 years, but they are still in use without any deterioration etc.
The overall rating is 5 stars, including the self-satisfaction (^_^;) that I was able to divert OEM parts of another manufacturer that were sleeping.
Was the installation difficult?
If you are a do-it-yourself maintenance person, the installation is not so difficult.
What is the point or hang of the installation?
Remove the retrofit hand guard (https://www.webike.net/sd/24163393/) beforehand.
Remove the Clutch lever and Clutch Cable, and pass the Cable through the Dust cover.
After that, install the Clutch Cable and Clutch lever as before.
By the way, I replaced the Clutch lever with a SPEEDRA one (https://www.webike.net/sd/21650337/) from OEM at this time (see the second posted photo).
After adjusting the play of the clutch lever, put the Dust cover over the base of the lever.
[Was there anything that disappointed you?
Nothing special at the moment.
[Was the Instruction Manual easy to understand?
(No Instruction Manual is provided.)
[Included Parts:were they on?
Included Parts:is not included
Please let us know if you have any opinions or requests to Manufacturer.
Nothing special at the moment.
[Do you have any products to compare it to?
・KAWASAKI:Boots,Lever Holder 49006-1017
(https://www.webike.net/sd/24350674/)
Although this time it was the diversion of SUZUKIOEM Parts, when the blog of the person who is riding on NC700X is referred, it seems that the Dust cover of KAWASAKI OEM Parts can also be diverted (when actually diverting, please be self-responsible).
[Others]
The OEM Parts (part number:57341-40003) that is the subject of this impression is the successor to the OEM Parts (part number:57341-40001, the part number is confirmed in the old Parts catalog (see the third posted image)) that is actually installed.
It is not clear if only the part number was changed or the actual content of the part was changed...
Incidentally, the OEM Parts that I am installing were removed from my old DF200 DJEBEL (https://imp.webike.net/bike/0017015/) and stored (because they were no longer needed when I installed the OEM Option Knuckle cover (https:// (Because it became unnecessary when the OEM option Knuckle cover (www.google.co.jp/search?q=57300-05810-30H) was installed).
I write the imprecation referring to the item Template prepared at the time of posting the imprecation (https://www.webike.net/commu/impre/).
View detail