Reviews
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
If you think about it in the long term, we recommend replacement.
I was looking at ESTRELLA's Fuel Cock, and I was wondering about SR400 too.
I'm not seeing any glitches at this point, but I'm concerned that there may be some in the near future.
This one is also dirty near the Fuel Cock, I could see Gasoline seepage, so let's replace it!
I feel like I should just replace the internal Packing, but I decided to replace it still wanting to continue to ride.
Like ESTRELLA, SR is also a negative pressure carburetor.
Fuel Cock (Negative Pressure Cook)
...Cook is a Fuel Cock that uses air pressure.
The Motorcycle is divided into Parts called Fuel Tank (Fuel Tank) and Fuel Cock (Fuel Cock) that connects the Carburetor.
Cook's Place.
The parts called "Fuel Cock" are attached to the bottom of the fuel tank.
Applies to vehicles equipped with a Reserve Fuel Tank.
Mainly Carburetor cars.
How Fuel Cock works.
It is generated when the engine is running and the air mixture is inhaled. "Negative pressure" Gasoline flows through the open valve by
Simply put, if Engine is on.
→Gasoline flows.
When the Engine stops
The flow of →Gasoline stops.
[If the Fuel Cock malfunctions...
Fuel supply is not normal, causing Engine malfunction or fuel leakage.
→Idling unstable, frequent stalls, Gasoline smell.
...Gasoline leaks.
→ Flammability hazard.
Fuel Cock failure can occur over a long period of time due to deterioration. The following are some of the causes.
Cause
Rust in Fuel Tank, Gasoline mixed with rust passes through Cook →Damaged parts in Cook 。
Internal packing damage due to age-related deterioration.
*Packing is mainly Material:Deterioration occurs due to constant contact with Rubber and Gasoline.
I think this is also the case for SR400.
A simple explanation is that Cook = faucet.
You know how sometimes you find water leaking even though you've tightened it properly?
Material inside:It leaks because the RubberPacking has deteriorated and is no longer sealed.
Although the replacement is not large, there are many steps involved.
How to Replace Motorcycle Fuel Cock ~SR400~
(1) Empty the fuel tank (Gasoline). 。
If you see Rust in the tank, remove the rust. Soak the tank in rust remover (Sun Pole can be substituted) and leave it to soak overnight.
↓
(2) Turn off Fuel Cock.
↓
Pull out the Fuel Hose and the Negative Pressure Hose.
Please check that there are no cracks in the hose.
↓
Place the Fuel Tank from (4) on a step Ball or soft place.
↓
(5) Replace the Fuel CockAssy.
↓
? ?→? Return in this order to complete the process.
〜After replacement
◎Of course, the Gasoline blotch near Cook is gone.
◎Improved a little Gasoline smell.
If you want to keep the cost as low as possible, you can replace only the packing with a large sturdy one, but if it is an old car body, it is better to replace it with a new one.
View detail
Fits: YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Mole 2 Yamaha Part Number B67-28346-00 MT10
About quality and texture Quality is really good, the texture of the actual product is smooth but has slight ridges to help with grip About the feeling of use This is a part that helps you keep hold with your knees Products to buy together I bought this product along with the other side to have a matching pair Difficulty of installation No problems with installation as they just clip in Cost performance and comparison with other products The cost was really good value and I do not think you can buy another product that does the same thing About shipping and packaging Shipping was really good value and the packaging it all came in was good too. Nothing was any issue. Any concerns, cautions, or advice when purchasing No problems about ordering from Webike. I know what I am buying. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125G, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125X, YAMAHA YZ250G
Genuine Yamaha Special Washer for YZ250F 2003
This bike came in with a lot of issues which have clearly not been addresed in a number of years. One of the main ones bothering me was the fac that the fuel tank was bouncing around which is of course a major hazard. When we found the issue, it was that the previous owner or someone who should not be let anywhere near a bike, had totally left out the special washer that helps keep the fuel tank stable with the pivot. This was not really a hard part to find and at the cost from Webike, I am really surprised this was not replaced well before now. The cost of this part and the other ones in my order was really good as I got them all shipped together. All arrived via EMS in 5 days with everything perfectly packaged and 100% great condition. The washer is a good machined cnc part that was well presented. The finish is a smooth clean and ready to fit. The inner diamter is absolutely perfect, the bolt went in no problems, there is very little movement at all now. The fuel tank is now safe and one of the bigger jobs to get this bike back where it should be. Thank you Webike, great work. View detail
Fits: YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA RIVA 125 (XC125B), YAMAHA RIVA 125 (XC125D), YAMAHA RIVA 125 (XC125E), YAMAHA RIVA 125 (XC125F), YAMAHA RIVA 125 (XC125G), YAMAHA RIVA 125 (XC125H), YAMAHA RIVA 125 (XC125J), YAMAHA RIVA 125 (XC125K), YAMAHA RIVA 125 (XC125L), YAMAHA RIVA 125 (XC125M), YAMAHA RIVA 125Z (XC125ZA), YAMAHA SECA II (XJ600SD)
OEM HOSE FOR MY TDUB
I WAS LOOKING TO BUY A HOSE FOR MY TW200 BUT LOCAL SELLERS DON'T HAVE GENUINE YAMAHA PARTS THAT FIT FOR MY BIKE..I Odered a genuine hose from webike store.Price is so cheap. OEM HOSE QUALITY IS EXCELLENT ,VERY THICK,FLEXIBLE,WILL NOT EASILY PEEL OFF or Cracked FROM THE EDGE.Quality rubber right there.The OEM hose can be use for very long time for sure, The hose fit like a glove on the carburetor side and the fuel petcock side .Very easy to install and remove from the both edges without damaging the rubber hose .the oem hose ID 5MM AND OD 10MM.TOTAL LENGHT 24CM.This OEM quality hose very strong and durable.I can really feel when I touch it.The package arrived on time .As usual packing quality is awesome too.I have been ordered so many parts from the WEBIKE SHOP. Great Online shop ever and never had a problem .great communication and smooth transaction.I highly recommended . So many products for cheap prices.I love shopping at webike .WEBIKE SHOP Way beyond 5star View detail
Fits: YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL
OEM VALVE PACKING INSTALLATION
TW200 PETCOCK VALVE PACKING GASKET IS VERY HARD FIND THESEDAYS.So I ordered one from The Webike Shop.Valve Packing Installation process is very easy. First I had to remove all the fuel in the tank and removed the petcock from the tank .Older petcock valve gasket might need to replace cause sometime rubber material may worn out or cracked . mine still in a good shape but I got a brand new one inmy hand. to reach the older valve packing ,first unscrew the two phillips bolt that hold the valve in place. valve has a o-ring seal that fuel doesn't leak out .then the older valve packing. place a new valve packing and install the rest in an order .product price is so cheap.I ordered so many product from the WEBIKE store and never had a problem. Great Communication and Smooth Transaction.Highly Recommended .Webike Shop Beyond 5star View detail
Genuine Yamaha Side Cover 1 for YZF-R1 2007
Genuine Yamaha Side Cover 1 for YZF-R1 2007 Due to the age of this bike and the fact that it gets ridden in all weathers, some of the plastics were showing thei age badly. Especially this left side cover. Having checked the price from my local Yamaha dealer, I was very shocked as to how much they charge. Sorry, I will get this part from Webike for a third of the cost. Along with a few other parts that needed ordering, this meant the shipping cost was spread out and made the cost very reasonable indeed. EMS fast service is the courier I use now, they just do what they say on the tin. Your order is with you in 5 days roughly to the UK. Well, this is the time frame I have been getting and they have never let me down. The box was secured with tape on the outside edges and any empty space on the inside was filled with air pockets and bubble wrap. Most of the parts already had some padding on them anyway so nothing could possibly get damaged during transit. All arrived with me in 5 day as expected. All perfect condition. Even the little tabs on this cover were still in tact, phew, It is a nice strong plastic but flexible enough to take a few stones from the road. There is no point in having a cover than has no flexibilty to it or at some point it is going to snap. The feathering finish is really nice, kind of looks a bit like carbon but it's not. If we wanted carbon, we would have bought that. The tabs are all neat, the lugs on the reverse are cut well and there is even a small damper on it. Excellent!. Fitted easily and finished the look of the bike. Maybe in future, the opposite side will be purchased. That side it honestly not bad at all which I cannot get my head around, must be the position it is stored in. Anyway, thanks Webike, great job. View detail
MT10Sp silver tank cover
Silver Yamaha MT10S~P tank cover. Wanted to make a change to my colour so I decided to go for the part I need in 2 different colours. This one and the Matt Dark Grey one for the MT10 2018. Really easy to order, easy to find correct part number. Very reasonable price as always with Webike. Shipping was super quick and arrived with no problems, all packaged very securely and no signs of any damage. Brilliant. Easy to fit, just pop the 2 push pins out and pull. Looks really good on and a nice contrast to my original. Now I have a couple to swap and change. Thank you Webike View detail
Fits: YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Really neat Yamaha part
Dark Matt grey Yamaha MT10 tank cover. Wanted to make a change to my colour so I decided to go for the part I need in 2 different colours. This one and the silver one for the MT10SP. Really easy to order, easy to find correct part number. Very reasonable price as always with Webike. Shipping was super quick and arrived with no problems, all packaged very securely and no signs of any damage. Brilliant. Easy to fit, just pop the 2 push pins out and pull. Looks really good on and a nice contrast to my original. Now I have a couple to swap and change. Thank you Webike View detail
Fits: YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Genuine Yamaha Mole 1
Purchased as a replacemnt for My Yamaha MT10. This is the right hand side mole 2. Easy to find, using part search, packaging was very good, all items were nice and snug inside the box. No chance of any damage during transit. Lovely feel, very tactile, finishes off the look perfectly. Upon receipt, item was easy to unpack and install. Used the old spring clips to fit. After completing the install, my passenger is more than happy with the result. Thank you Yamaha for having such great products and interchangable with other models for a better fit. All in all, great experience and 5 stars Webike View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Genuine Yamaha Air Scoop 2 part, very well packaged
I purchased this as a replacement for my scuffed part after a small spill. I could buy this from my home country at 3 times the cost of this one. I have no problem with buying direct from the manaufacturer by way of Web!ke. This is my second order and I have already added a third order. The package was very well padded out so not to damage the part. Pristine condition once opened. Exactly what I needed. Very pleased, will be back again View detail
Fits: YAMAHA XT250, YAMAHA YZ250G, YAMAHA YZ125G, YAMAHA YZ125G, YAMAHA XT250G, YAMAHA XT250G, YAMAHA XS650SG, YAMAHA XS650SG, YAMAHA XS650SG, YAMAHA XS650SG, YAMAHA XS650G, YAMAHA SR500G, YAMAHA GT80G, YAMAHA DT100G, YAMAHA XT250, YAMAHA XT250, YAMAHA VIRAGO 750, YAMAHA YZ250H, YAMAHA YZ125H, YAMAHA XT250H
Exactly what I ordered
For OEM Yamaha parts, I have not found a better supplier in Australia or USA for price, or timeliness. Items arrived quickly and well packaged. Very happy. View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA SR400, YAMAHA SR400, YAMAHA BOLT, YAMAHA BOLT, YAMAHA SR400, YAMAHA SR400, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT, YAMAHA BOLT C SPEC, YAMAHA BOLT C SPEC, YAMAHA SR400, YAMAHA SR400
Exactly what I ordered
For OEM Yamaha parts, I have not found a better supplier in Australia or USA for price, or timeliness. Items arrived quickly and well packaged. Very happy. View detail
Fits: YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E
christmas present has arrived
Just awesome , the price is awesome .looking forward to do more business with you . thanks webike ! you can't beat the price anywhere else in the web . View detail
Fits: YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YFZ-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R6 (YZFR6V), YAMAHA R6 (YZFR6VC), YAMAHA R6 50th Anniversary (YZFR6SPV)
Yamaha OEM SCREW
Original bolt for Yamaha R1 RN12 05 on the tank pad. Small bolt, good metal, strong. I bought two bolts from you. In the future, I plan to buy more in stock. View detail