Reviews
Fits: HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP
Lead Valve On Lee
The wings on the Lead Valve are broken and Assembly has been very helpful in not having to replace them.
I think it is a good idea to replace the Body periodically before it is damaged.
When installing, care must be taken with the front, back, and orientation.
View detail
Fits: HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500X, HONDA CB500X, HONDA CB500X, HONDA CB500X
Genuine Honda Replacement Lens for MSX125 2017
This was the second part of the repair work that needed completing after a small fall from the bike. The front and rear indicators took a bit of a hit but luckily, the rear was just the lens broken. Finding the right lens was also a little tricky to locate as the Honda schematics are not perfectly clear when it comes to the lens but managed to order the right one. The cost of the replacement lens was really good value and quite a bit cheaper than could be sourced locally at my Honda dealer. Witht some other parts in my order, I got them all shipped together via EMS and the order arrived in 5 days. The lens came in a tiny Honda box but was well protected with bubble wrap around the entire amount of parts ordered. The lens is crystal clear orange and no flaws could be detected. The edges are not sharp to cause harm and once added to the indicator body, the fitment was flush. Just be careful not to break off the tang that goes in at an angle to fit. Well made lens and very happy with the whole process of ordering. Thanbk you for the great work. View detail
Fits: HONDA GROM125, HONDA GROM125
Genuine Honda Front Indicator Assembly for MSX125 2017
This was purchased due to a small fall and the front and rear indicators got some damage. The correct part was a little tricky to find as the Honda schematics aer not perfectly clear, but I got the right one in the end. The original part number was now superseded to this newer version free of charge by Webike, so that was nice. The cost of the assembly was slightly cheaper than could be sourced locallly but the local dealer did not have this in stock. I also added a few other parts needed for this repair to my order and this meant the cost of shipped was good value. My orde rarrived in 5 days from being shipped and everything was in 100% perfect order. The indicator assembly came in the Honda box and was wrapped in a padded material. The assembly itself is well made and all the joints to the lens are spot on. The lens is crystal clear orange but looks amazing. The connector was kept safe too and it was just a plug and play fitment. Very pleased with this purchase. Thanks Webike. View detail
Fits: HONDA CB1100, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB500, HONDA CB750, HONDA CB750, HONDA CB750
For CB250F
really genuine product. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250
For CB250F
I searched for this in my country L.Water 19503KEA000 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250
For CB250F
R.Water 19502KEA000 I searched for this in my country but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250, HONDA HORNET250
For CB250F
I searched for this in my country Water pump 19521KEA000 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VT750, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VF750, HONDA VF750, HONDA VF750
For CB250F
I searched for this in my country DUST SEAL (22X42X7) (ARAI) 91252-MC7-003 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR650L AC/B, HONDA XR650L AC/A, HONDA XR650L AC/A, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC, HONDA XR650L AC
For CB250F
I searched for this in my country OIL SEAL (25X40X7) 91252-428-000 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R
Torque rod replacement
GPX Popz125
I purchased this to replace a Torque rod.
The rubber washer that was originally attached to the bolt had deteriorated and cracked. When the bolt was tightened, it turned too much and the screw threads of the bolt became worn and had to be replaced all together.
Sizec. was no problem, and I was able to install it.
I used the product for a few days with the original Bolt on it until it arrived, so I'm replacing it.
I had a Trouble with a screw thread that was licked by Timing and would not come off! I had a trouble that I could not remove the screws due to the licked screw threads, but I removed them with a Gold saw from Daiso.
▼ Purchases
Rubber, Stotspar Arm Kutsi 43434-286-000
BoltA, Brake Stotspar 92811-10000
Washer 8MM 90505-425-000
Nut, 6 kaku 8MM 94001-08000-0S
We did not purchase PinSplit this time, so we used the same one as before, but the shape did not fit slightly, so we plan to purchase additional ones.
View detail
Fits: HONDA CT110, HONDA CT110, HONDA CT110, HONDA CT110, HONDA CT110, HONDA CT110, HONDA CT110, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA CB125TT A, HONDA CB125TT AC, HONDA CB250 A, HONDA CB250 A, HONDA CB250 A, HONDA CB250 A, HONDA CB250 A, HONDA CB250 A
Torque rod replacement
GPX Popz125
I purchased this to replace a Torque rod.
The rubber washer that was originally attached to the bolt had deteriorated and cracked. When the bolt was tightened, it turned too much and the screw threads of the bolt became worn and had to be replaced all together.
Sizec. was no problem, and I was able to install it.
I used the product for a few days with the original Bolt on it until it arrived, so I'm replacing it.
I had a Trouble with a screw thread that was licked by Timing and would not come off! I had a trouble that I could not remove the screws due to the licked screw threads, but I removed them with a Gold saw from Daiso.
▼ Purchases
Rubber, Stotspar Arm Kutsi 43434-286-000
BoltA, Brake Stotspar 92811-10000
Washer 8MM 90505-425-000
Nut, 6 kaku 8MM 94001-08000-0S
We did not purchase PinSplit this time, so we used the same one as before, but the shape did not fit slightly, so we plan to purchase additional ones.
View detail
Fits: HONDA C125, HONDA C125, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2
Torque rod replacement
GPX Popz125
I purchased this to replace a Torque rod.
The rubber washer that was originally attached to the bolt had deteriorated and cracked. When the bolt was tightened, it turned too much and the screw threads of the bolt became worn and had to be replaced all together.
Sizec. was no problem, and I was able to install it.
I used the product for a few days with the original Bolt on it until it arrived, so I'm replacing it.
I had a Trouble with a screw thread that was licked by Timing and would not come off! I had a trouble that I could not remove the screws due to the licked screw threads, but I removed them with a Gold saw from Daiso.
▼ Purchases
Rubber, Stotspar Arm Kutsi 43434-286-000
BoltA, Brake Stotspar 92811-10000
Washer 8MM 90505-425-000
Nut, 6 kaku 8MM 94001-08000-0S
We did not purchase PinSplit this time, so we used the same one as before, but the shape did not fit slightly, so we plan to purchase additional ones.
View detail
Fits: HONDA CB400F, HONDA CB400T, HONDA CB400T, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750L, HONDA CT110, HONDA CT110, HONDA CT125, HONDA CX500, HONDA CX500
Torque rod replacement
GPX Popz125
I purchased this to replace a Torque rod.
The rubber washer that was originally attached to the bolt had deteriorated and cracked. When the bolt was tightened, it turned too much and the screw threads of the bolt became worn and had to be replaced all together.
Sizec. was no problem, and I was able to install it.
I used the product for a few days with the original Bolt on it until it arrived, so I'm replacing it.
I had a Trouble with a screw thread that was licked by Timing and would not come off! I had a trouble that I could not remove the screws due to the licked screw threads, but I removed them with a Gold saw from Daiso.
▼ Purchases
Rubber, Stotspar Arm Kutsi 43434-286-000
BoltA, Brake Stotspar 92811-10000
Washer 8MM 90505-425-000
Nut, 6 kaku 8MM 94001-08000-0S
We did not purchase PinSplit this time, so we used the same one as before, but the shape did not fit slightly, so we plan to purchase additional ones.
View detail
Excellent part
Great piece, original Honda, and new. It has an excellent finish. Very Reliable, and robust. It fits, perfectly, in the my motorcycle. I recommend her. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Excellent piece
Very good piece, original Honda, and new. It has an excellent finish, and also comes with a genuine gasket. Reliable. It fits exactly on my motorcycle. I recommend her. View detail
Fits: HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Very good piece, original Honda, and new. It has an excellent finish. Very much Reliable. It fits, with high precision, on my motorcycle. I recommend her. View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA Z125M, HONDA Z125M
I was having issues easily finding neutral and replacing this part solved the problem
About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Genuine Honda part, and new. It has beautiful finish. Reliable. It met my need for a well-made replacement part. Fits, perfectly, in the my motorcycle. I recommend it. View detail
Fits: HONDA CB1100F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA VF750, HONDA VF750, HONDA VF750
Great piece
Genuine Honda part, and new; well-done. It has a good finish and fits, high precision, on my motorcycle. Great. I recommend it. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Excellent
Genuine Honda part, and new; from long-term stock. It has a good finish and fits perfectly on my motorcycle. Great. I recommend it. View detail