Reviews
Fits: HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A/A, HONDA VT600C A/A, HONDA VT600C A/A, HONDA VT600C A/B, HONDA VT600C A/B, HONDA VT600C AC
Fuel Cock Display
The Tank section of the Fuel Cock was missing, so I purchased this to display it.
The smallest letter Sticker is likely to be cut off unless it is carefully peeled off from the backing paper when displayed.
View detail
Fits: HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800
To new.
The one on the wall was old, so I bought a new one because it looked like I could buy a new one, and I reapplied it.
It is helpful that HondaOEM and Single Item are sold.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
degradation
Is the installed product deteriorating? The installation was deteriorated and cracked. The Radiator fluid was leaking, so I purchased a new one to replace it.
OEM Product, it would be helpful to be able to exchange it for a new one.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA RVF400, HONDA RVF400, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA XL125VXL1000V VARADERO, HONDA XL125VXL1000V VARADERO, HONDA XL125VXL1000V VARADERO, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN
exchange
Fuel Cock of Fuel Tank, Material:Since it is plastic, it is deteriorated and discolored, so it will be replaced with a new one.
It would be helpful to have it listed and sold under HondaOEM Product so that I can quote for it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000
Replace with new one
The bolt used on the front tire and fork had rounded corners due to removal and attachment, so we purchased a new bolt to replace the old one with a new egg.
It is available at HondaOEM Product and the price is not that expensive.
View detail
Fits: HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F2, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
losing something
HondaOEM, it is a Screw to fix the Fuel Cock, but I lost it due to vibration, so I purchased and installed it.
A thin loosening clamp is applied to the Screw section, but it seems to loosen and come off if it is not reapplied when removing and attaching.
View detail
Fits: HONDA NRX1800D, HONDA NRX1800D, HONDA NRX1800D, HONDA NRX1800D, HONDA NRX1800DB, HONDA NRX1800DB, HONDA NRX1800DB, HONDA NRX1800DB, HONDA NRX1800E, HONDA NRX1800E, HONDA NRX1800E, HONDA NRX1800E, HONDA NRX1800EB, HONDA NRX1800EB, HONDA NRX1800EB, HONDA NRX1800EB, HONDA RVT1000R AC, HONDA RVT1000R AC, HONDA RVT1000R AC, HONDA RVT1000R AC
losing something
Right SideCenter, Nut to fix with Center cowl, I noticed it was gone, so I bought it and installed it.
It is helpful that it is sold by HondaOEM.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
exchange
Material:Since it is a rubber product, it had inevitably deteriorated, cracked, and broken at the screw fixing part, so I purchased it for replacement.
It is easier and more helpful to order from us because we don't have to ask for a quote.
View detail
Fits: HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA CB400F, HONDA CB400F, HONDA CB400F
Replace with new one
Front tire, fixed bolt of ASKULShaft, the corner had become rounded due to repeated mounting and dismounting, so a new bolt was purchased and replaced.
Sold as a Honda OEM Product, not too expensive, and can be replaced with a new one.
View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
OEM is safe
Compared with inexpensive Other Brand Products, it is heavier and heavier.
The Element is also thick and moist with a sense of volume.
View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
oRing for DrivenFace
Purchased as maintenance and spare parts.
Made in China Rubber Band1pc. is over 300 yen and the cosmetics are very poor.
View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCH50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
Fill the ORing with a good grease (No. 3) after replacing the ORing.
Even if we replace the ORing here.
I just put in a little bit of No. 2 Grease and it starts leaking.
Be sure to use a Grease with a pitch of 3.
AF74-79Service manual recommended Grease
Inside DrivenFace ・・・ SEA BASS SUPERGreaseA (ShellALBA Niya GreaseS-3) 660 yen
Bearing・・・SEA BASS SUPERGREASEC (ShellALBA Niya EP2) 374 yen
View detail
Fits: HONDA C125, HONDA C125, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA ADV150, HONDA C125, HONDA CB300F
OEM Tool Bag
About quality and texture - Good quality, just a basic material tool bag for the OEM tools. About the feeling of use - It does the job keeping the OEM tools secure in the side cover. Products to buy together - The tool band that secures this bag to a cover in the side cover, product # 89012-KZL-930. Difficulty of installation - Easy to install the tool bag into the side cover if you have press screws and tool band available, 5 minutes and you will be done. Cost performance and comparison with other products - Very well price repair item when your original tool bag breaks down, direct no aftermarket options out there right now. About shipping and packaging - No delay on shipping and arrived on time as advertised. OEM packaging and arrived without issue. Any concerns, cautions, or advice when purchasing - If you want a longer lasting material tool bag you may want to source a local tailor. View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M
Honda OEM headlight for the Monkey 125
Here is the part number if you have damaged your Honda OEM headlight for the Monkey 125 like I did. The replacement cost for this genuine Honda part is extremely expensive but unless you intend to change the style of your headlight I believe you have no other option at the moment but to purchase this from Webike. Installation is simple as I was just swapping out the damaged part and I will now look into the available options through Webike to add some protection for the headlight to prevent this from happening again in the future. Headlight grill from Hepco & Becker part number 700-9523-0001 looks to be a good option. View detail
Fits: HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA Z125M, HONDA Z125M, HONDA CT125A AC
Honda OEM upper engine mount bolt for Monkey 125
While carrying out some routine maintenance on my 2018 Honda Monkey 125 I noticed some white powder around the engine mounts that needed to be investigated. As you can see from the photo, after removal the shaft of the bolt is very corroded due to being fitted at the factory dry with no grease to protect it. The bolt cleaned up reasonably well and has now been refitted but due to the really cheap prices Webike has for these three engine mount bolts I will be adding a replacement set to my next order. I would advise if you have the means and the time that you remove and grease these early on in the ownership of your motorcycle before it becomes a bigger problem. View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M
Nice chrome finish but thin material
When inspecting my Honda Monkey 125 prior to purchasing from the original owner I did notice a small dent in the muffler protector and thought I could live with it. After owning the motorcycle for several years now I could no longer put up with the damage even though it was so small due to the beautiful chrome finish making it stand out too much. The replacement cost of the new OEM Honda part is not cheap so you need to be careful when handling the muffler protector to prevent this try of damage in the future. The muffler protector does work very well to help prevent burning your leg on a hot muffler and the look when paired with a aftermarket exhaust it fantastic. View detail