Reviews
Fits: HONDA NSR250SE, HONDA NSR250SP
Lead Valve On Lee
The wings on the Lead Valve are broken and Assembly has been very helpful in not having to replace them.
I think it is a good idea to replace the Body periodically before it is damaged.
When installing, care must be taken with the front, back, and orientation.
View detail
Bolt
The Right Side fixed bolt is replaced with a new one.
It seems to have been changed to the alternative part number:64508-ML7-010, but the tightening part is still ? shaped.
I would prefer a ?-tightened shape.
View detail
Fits: HONDA GROM125
Genuine Honda Front Indicator Assembly for MSX125 2017
This was purchased due to a small fall and the front and rear indicators got some damage. The correct part was a little tricky to find as the Honda schematics aer not perfectly clear, but I got the right one in the end. The original part number was now superseded to this newer version free of charge by Webike, so that was nice. The cost of the assembly was slightly cheaper than could be sourced locallly but the local dealer did not have this in stock. I also added a few other parts needed for this repair to my order and this meant the cost of shipped was good value. My orde rarrived in 5 days from being shipped and everything was in 100% perfect order. The indicator assembly came in the Honda box and was wrapped in a padded material. The assembly itself is well made and all the joints to the lens are spot on. The lens is crystal clear orange but looks amazing. The connector was kept safe too and it was just a plug and play fitment. Very pleased with this purchase. Thanks Webike. View detail
For CB250F
I searched for this in my country Water pump 19521KEA000 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
For CB250F
I searched for this in my country L.Water 19503KEA000 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
For CB250F
R.Water 19502KEA000 I searched for this in my country but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF450L, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R
Good deal
It is not sold as a OEM set, the seals are separate. I couldn't find Pro-x so I bought OEM. Both are same quality and japan made, only different OEM is a little expensive. If you are buying a used dirt bike go ahead and buy a of bearings. Don't just assume the ones on the bike are fine because you can turn the handlebars.These bearings are almost always neglected to the point of being damaging to the bike or dangerous to the rider. Get a new set from at webike. Special tools make the job easier. If you don't have a tool; First, I put the rings,bearing in the freeze. Then I heated case the with a torch. It wasn't very difficult. View detail
Excellent part
Great piece, original Honda, and new. It has an excellent finish. Very Reliable, and robust. It fits, perfectly, in the my motorcycle. I recommend her. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Excellent piece
Very good piece, original Honda, and new. It has an excellent finish, and also comes with a genuine gasket. Reliable. It fits exactly on my motorcycle. I recommend her. View detail
Fits: HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Very good piece, original Honda, and new. It has an excellent finish. Very much Reliable. It fits, with high precision, on my motorcycle. I recommend her. View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA Z125M, HONDA Z125M
I was having issues easily finding neutral and replacing this part solved the problem
About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Genuine Honda part, and new. It has beautiful finish. Reliable. It met my need for a well-made replacement part. Fits, perfectly, in the my motorcycle. I recommend it. View detail
Fits: HONDA CB1100F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA VF750, HONDA VF750, HONDA VF750
Great piece
Genuine Honda part, and new; well-done. It has a good finish and fits, high precision, on my motorcycle. Great. I recommend it. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Excellent
Genuine Honda part, and new; from long-term stock. It has a good finish and fits perfectly on my motorcycle. Great. I recommend it. View detail
Fits: HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR650L, HONDA XR650L, HONDA XR650L, HONDA XR650L, HONDA XR650L
Good part
Genuine Honda part, and new state. It has good finish. Reliable. It met my need for a well-made replacement part. Fits, with high precision, in the my motorcycle. View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250
Cowl Fixed Bolt
I thought HondaOEM Product would be a good choice for installation due to loss of Cowl Fixed Bolt.
I don't think it is such a special Screw, but it was expensive for HondaOEM.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100, HONDA ST1100
Cowl Fixed NutClip
Left again, the NutClip that fixes the center cowl in the middle of the front of the cowl was missing, so it was installed.
I was able to purchase and fix it with HondaOEM Product and it helped me.
View detail
Fits: HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA VTR-F, HONDA VTR-F, HONDA VTR-F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA JADE, HONDA JADE
HONDA OEM Motorcycle parts Element,Oil Filter 15410KEA305 Review
I fixed this Oil filter for my Hornet 250, genuine OEM product. Delivery condition of the product was at its best. well packed with safety. Im recommending anyone to use this product for who are searching for genuine products for the bikes. Thank you so much Team webike for your superb service! View detail
Fits: HONDA GL1800BD, HONDA GL1800B2, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800
Replace with new one
The Cowl Fixing Nut was old, so I replaced it with a new one, which was sold by HondaOEM Product and was not expensive. View detail
Delivery time is fast and pleasant.
I was surprised to see that a motorcycle shop even handles parts for agricultural machinery, but I was able to place my order with confidence because it is a Honda product.
The engine oil has been injected to the specified level in March because it is a 4-stroke engine.
The carburetor had just been replaced, and the clutch housing and clutch were also suspect because the carburetor was blowing up under load, but the exhaust gas outlet of the exhaust system was black and trailing, and I thought it might be a very minor choking caused by Carbon clogging in the unburned gas. I bought it because I thought it might be a minor asphyxiation caused by a blockage of Carbon in unburned Gas.
All that remains is to destroy the possible places one by one.
Thank you very much. m (_ _) m
View detail