Reviews
Fits: HONDA C70, HONDA C70, HONDA CB750F, HONDA CB750F, HONDA CB750K, HONDA CB750K, HONDA Z50, HONDA Z50, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50RD, HONDA PC800 AC
Genuine product
This is 6304 bearing. This will match for various kind of motorcycles. This is manufacture by Honda made in Japan bearing. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Inexpensive and easy to replace each time.
[How is it used?
I did not see it listed in the compatibility chart, but I looked at the Parts List and saw that it could be used as a Drain Washer for NC42, so I purchased it. It seems that it can be used for many types of vehicles. (Owner must decide whether or not his/her vehicle is actually compatible with this product.)
How was your experience with it?
The texture of the Drain Washer is slightly different on the front and back sides due to the manufacturing process, but in my case, it did not affect my use of the product. So, we tighten the bolt by hand and visual inspection. It is better to use a Torque wrench.
How did it compare to other products?
This part of the product is OEM based. The price is also low.
[Points to note]
If the drain bolt is over-tightened, it will be irreversible, so it is better to use a Torque wrench or, if you have no choice but to work with your hands, hold the Glasses Wrench shallowly and work with only one hand.
View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F
Nut with a nice decorative finish
About quality and texture, I can confirm that the quality is good and that the material used is steel with a chrome plated finish but the steel is a little soft and deforms easily. About the feeling of use, I do like the decorative finish of this nut with the capped end and chrome plating, they look much better fitted to the exhaust flange then a regular steel nut that leaves the stud threads exposed. Products to buy together, While you are perfecting the fine details on the bike you should also add some allen key button head fasteners to your cart so you can remove the reflectors from the front fender and replace the stand off bolts. Difficulty of installation, I can say the fitment of the capped nuts for my installation was very easy due to the ease of access and simple nature of the task. Use of a single hex deep socket will minimise deforming the nut in the process. Cost performance and comparison with other products, The pricing of this product is good. You receive a nut that looks great and has a nice chrome finish but the steel is soft so a more expensive stainless steel nut would be more ideal if you tend to remove and install these often. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB400T, HONDA CB400T, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R
Used for MT-25 clutch lever
If you can remove and install the clutch wire (lever side), the work is easy. It is easy to work if the Clutch Wire (Lever side) can be removed and attached.
The bottom side of Lever is slightly floating due to SensorSwitch hitting it, but the crucial top side is Exactly.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
oem quality
You look great. No copper washer that came with the bolts, the old washer was leaking no matter how hard I tried. It's pretty frustrating and made the installation way more pain than necessary for me. I finally ordered a new OEM washer. I decided to use it and no leaks.perfect fit. just what i need. and as always, the oem parts are of good quality. View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Replace with new Screw
The Fixing Screw at the CaliperCylinderHose was rusted, so we purchased a new one to replace it.
HondaOEM replaced it with the same Screw and the price was reasonable.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000
Replace with new one
The bolt used on the front tire and fork had rounded corners due to removal and attachment, so we purchased a new bolt to replace the old one with a new egg.
It is available at HondaOEM Product and the price is not that expensive.
View detail