Reviews
Fits: HARLEY-DAVIDSON Used 87-03 rear master cylinder
Rear master cylinderOverhaul
I used it for the 2003 MODEL 883 Rear master cylinderOverhaul.
It is higher than the part of Master Cylinder of Front.
I wish the Rear was as cheap as the Front, but …
View detail
![[NISSIN Repair Parts For Master Cylinder] Reserver Tank Hose](https://img.webike-cdn.net/catalogue/daypic140709/38114_1_l_TS.jpg)
Fits: Others
I used it for STREET TRIPLE!
I needed a longer hose to move the reservoir to another location so I decided to use this one. The softness and the flexibility of the layout is GOOD. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Again.
It's not a good idea to use a black mark to make it stand out, but I was disappointed to see a strange mark on the Top of the page & hellip; it's not OEM, so I filled it with black.
Titanium Coating or more expensive, but I could have used that one.
View detail
Parenthesis OK
The Band of TeamKagayama that I had been wearing up to now is now very tired, so I bought a new one.
The price is very reasonable for YOSHIMURABrand, and the price is very good for parenthesis, so it is a recommendation for SEA BASS car riders.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
No quality issues as it is an OEM Product
This is the OEM equipped with the H2 OEM.
I bought it with the intention of installing it on my car, but I didn't actually install it because the angle of the Hose installation was 90-degrees, and it didn't feel right in terms of angle.
The thing itself is perfectly fine, but you should buy it considering the angle of fitting.
View detail
Fluid seeping out of the entire Hose 1.5 years after installation.
Around 1.5 years after installation, the entire Hose started to sweat, and after 2 years, the amount of sweat increased and it became unusable. It's not a racing exclusive part. and it's part of a Brake part, so I guess you could say it's a defective product.
This is the same or less than the oil-resistant but non-Fluid compatible Universal Hose.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
On behalf of the OEM!
There was a fluid leak from the rear cylinder of the 883R that I purchased. Buy RebuiltKit!
The components are as shown in the picture. I chose this one because I thought NeoFACTORY's Rebuild Kit would be sufficient.
The performance is neither acceptable nor unacceptable, the wFluid leaks have subsided and the Brake works well! Ta!
View detail
A little high?
It takes a lot of time and effort to go to Homsen to find the right one, because there is a large quantity or not enough length You can buy this one at the same time as Convenience It's not cheap, but it's not a problem because it's cheap to begin with View detail
dirt prevention
I bought it to prevent staining of the Reserver tank and for dress-up
The product is well sewn and not cheap at all
I think Mr. YOSHIMURA's logo is also very cool
If I were to express my concern, I would say I'm worried about theft (Lol)
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
To improve the texture of the ZZr1400
Due to oil tank deterioration, I bought it to improve the texture of the oil tank if I were to buy it new. It's a 2006 model The texture around the Handlebar of ZZr1400 has been improved If you want to use it for other cars, you need to use Bracket and so on View detail
On the rusty side!
Whenever I buy a Motorcycle, I change it
Stainless steel, so corrosion is minimal, and it's always transplanted with timings for vehicle replacement You can also buy them at home center The price doesn't change much, or the numbers don't match up ConvenienceParts is convenient
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
It's useful enough
I changed it with the brake fluid when I changed it
It can be used for the same as the OEM Product, etc
Of course there are no Fluid leaks
I'm happy with it because it's less expensive than the OEM product
View detail
Fits: HONDA CB250F, YAMAHA YZF-R25, HONDA GROM, HONDA GROM, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, KAWASAKI NINJA250R, HONDA VTR-F, HONDA VTR250, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA CBR650F
Very cool
Just take the original off and put it back on! PetitCustom in less than 5 minutes!
It's cheap and I can see it when I'm riding it, so I'm very happy with it
Good purchase
View detail
Was good
The design is good and I am very satisfied with the fit In One Point, I chose Red because I thought Red would be brilliant Not only that, but I think the design and texture of the product convince me View detail
On the move to Tank …
I bought a rear master cylinder for my GSX1300R
The location of the OEM Fluid Tank is poorly maintained and we decided to relocate it
The 90-degreesNipple that came with the OEM was not aligned well … I replaced it with a StraightNipple from Option Parts
It took a lot of time and effort to make the tank bracket by myself, but I am satisfied with the performance and maintainability I've got it
View detail
To adjust the length
I bought a rear master cylinder for my GSX1300R …
I made various adjustments as I built it in
It's just not long enough … I thought about it You'd be quicker to buy it He said
I'm very happy with the way it works
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Ticket Master End
Top notch quality and perfect fitment which is expected from this company. Wasn't sure on fitment due to the M/C being a universal fit but well worth it in the end. View detail
preventive measure
Used in 2018 PCX KF30
In the past, Screw licked this part due to sticking, and I had a bad experience with it, so I replaced it
It's also black in color and unobtrusive
View detail
It's all in GALE SPEED
To match the GALE SPEED's radiphone installation, the Tank also has the same manufacturer I did
It's good because it can be rotated, so it doesn't put too much force on Hose
Also, you have to buy a Hose, Hose Band, Tank Bracket, etc And that's just for fun
View detail
Stylish Aluminum Cut-out RearMaster cap
The deciding factor in purchasing this product was the decidedly look! I bought it at first sight without comparing it to other products
Installation is simple and easy as you can replace the existing cap It is important to note that the cap will hit the stopper when installing or removing the cap So, if you loosen or remove the Fixing Screw on the car body side, you can replace the Cap with Smooth
There was nothing disappointing about it, it was the shape and color as expected
View detail