Reviews
Looks like OEM Product.
We waited a bit, but it was worth the wait.
I think this lack of discomfort is wonderful.
View detail
Side cover
It is very well made and I am satisfied with it. View detail
Cheers to the reproduction
The quality is good and the workmanship is comparable to that of the Left Side Cover, as it is used by other users.
I am sure I will be able to use it for a long time.
View detail
Useless.
As soon as I unpacked it, I was like, "Can I use this? I was under the impression that it would not fit the conical Element. I didn't think it would fit the conical Element. I made a tentative fit and sure enough, it worked. I had to pay more than 4000 yen to Garbage, and I am very angry. View detail
Refreshing.
I've been waiting 4 months for it to be installed! It's a perfect fit and a beautiful cover! I highly recommend this! View detail
Note for JB03.
If you review it carefully, you can usually tell from the image that the StickerDesign is different from the JB03's Black, so the Quantity:Pair (for Left and Right) W will be Asymmetry with
I put up and then Quantity:Pair (for Left and Right) Compare and contrast What is it? Something's different..." but since there is no particular inconvenience, it is left as it is.
The installation itself was a bit of a hassle to put the ABS piping clamp back on, but other than that, it was an easy fit.
This is a necessity for Down Type Exhaust System, so Painted is a great product.
View detail
MONKEY125RightBox。
Additional report, the difference between JB-02 and JB-03 is the MONKEYMarkSeal. Besides the MONKEYMark border, the color of the MONKEYMark itself was White for JB-02 and Silver for JB-03. So, I'll order the OEM product with 5% discount at Webigusa now. View detail
MONKEY125SIDE。
I need it because I replaced it with MORIWAKI Down Type Exhaust System. (I checked with the manufacturer, Cat's Factory, and they said that the color and the installation position are the same for JB-02 and JB-03, but the design of the MONKEYMARK on the SIDE is different). The MONKEYMark on the JB-02 has a black edge, but the edge on the JB-03 is red. WeBig is offering a 5% discount on OEM products, so you can buy MONKEYMark for JB-02 as well. View detail
things look good
The product looks good, but the delivery time is too delayed…… I want you to keep the delivery date. View detail
It's worth the wait.
Side cover by CATS FACTORY
I am very satisfied with the color and shape. It took a long time for delivery, but I am satisfied with the Large size. It was worth the wait. Please consider it!
View detail
Fits Mukawa … but does not fit BigThrottle
Does not fit the air filter included with the BigThrottle manufactured by Mukawa.
No matter how you do it, you can't.
Please note that this point is not mentioned in this HP.
View detail
Wow that's cool
I changed to Mr. Mukawa's Air Cleaner and purchased and installed it together because I thought it would be better than not having it when it suddenly rained if it was left bare. I don't think I need it because I basically don't ride in the rain, but it looks good and I am satisfied with it. View detail
It was too beautiful.
Is it a must-have for Down Type Exhaust System? It is
It's only an OEM approximation, so be careful if you're worried about it, but my feeling is that it's too clean and the color is not the same as it was on a vehicle that's about a year old. I think it is too beautiful.
I installed it on a car without ABS. If you have ABS, you have to pass the bolt through the bracket where the pipe goes and install the grommet on the cover. If you do it normally, the Grommet will come off and it will be hard to install. If you use silicon grease, stone, water, etc. to make it slippery, it will fit easily.
I think this is a great price for a Painted side cover.
View detail
Difficult to install
The color is close to OEM and there is no sense of discomfort after installation. However, the installation is difficult for a beginner, especially, it was very difficult to align the LeftBolt hole, and it was necessary to tighten it forcibly by force at the end. View detail
CarbonGood.
I bought this at the same time as the Rear Fender. It was easy to install and I am very happy with the Large. View detail
CarbonGood.
I like Carbon, and I was troubled because it had come out from various manufacturers, but I bought it because the price was reasonable and the texture seemed to be good by Cat's Factory of FOR JAPAN MODELManufacturer. I was able to install it without any processing, so I am satisfied with the large size. I've been using it for a few years now, and I'm very happy with it. View detail
Perfect!
The fit and finish of this side cover is awesome! The OEM Monkey decal is an extremely nice touch. Highly recommended if you want an easy way to have an OEM colored side panel! :D View detail
Caution for people with ABS
When installing on a MONKEY125 with ABS
The hole to fit the screw at the back of the cover is the ABSPipe.
It is used as a place to be fixed and
It was mentioned in the Instruction Manual that it would interfere with the ABSPipe.
Please fix the Pipe with Tie Wrap etc. without interfering.
It was written in the Instruction Manual where to fix it.
Since it is not specified, the fixed point cannot be found.
I did Tie Wrap Fixing on the Cover where the Screw is placed at the back.
It's a bit wobbly, but I think it's large and sturdy…
Design is the best.
View detail
It is a quasi OEM Product.
I chose this product because I converted to Down Type Exhaust System and my Right Side was lonely.
In the product description. This product is handmade. There may be a small pin hole or clear paint product in the production process. Therefore, please refrain from those who are nervous or seek for perfection. I was worried because it said
LargeIt was beautifully done.
There are no pin holes etc. in the paint and the FRP shaping is very good. Even on the back side, there is no fluff of glass fiber.
The aluminum bracket for fixing the cover was the one that you can see at a glance that the flat bar was processed by hand, but it is not functional.
It was no problem at all.
The head of the bottom (M6CapTruss) screw hangs a little on the R portion of the Cover's ear.
Because an unreasonable force is applied to Cover, I fixed it with O-ring (P-6) on hand as interference reduction and buffer material.
It also comes with a Honda OEM MonkeySticker, and I am Largely satisfied with the quality and workmanship at this price.
View detail
Side coverColor by Cat's FACTORY:I received 2 Yellow, please return 1pc.
Side coverColor:YellowPlease let me know about the return. View detail