Reviews
Focus on appearance
Shift sensation feels smoother.
The entry into Neutral does not change.
Custom parts that look more or less the same.
I think so.
View detail
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
Only SNIPER has 115mm on the webike.
Purchased to adjust footpeg.
At 115mm, SNIPER was the only one that could be bought in a jiffy.
The texture is excellent.
View detail
It is easy to operate and looks stylish.
Installed on a GSX-S125, almost OEM and comfortable. I chose the black color, so the Knob for adjustment is red, which is a good accent. It is adjustable, but it was not so useful for me because I have small hands and use it closest to the grips. (I think it would be useful for people with large hands who use the OEM Lever too close to the Grip). The quality is high, and I am satisfied with the non-slip finish on the part where the Lever's fingers hit the surface. View detail
Fits: HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB250F, HONDA CB250R, HONDA CB400F, HONDA CBR250R, HONDA CBR400R, HONDA CBR400R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA CB300R, HONDA CB150R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
I chose Brand again because it is a reliable Brand.
The look was good enough for me and I decided to go with SNIPER again. It is easy to use. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERStem Nut Cap
I installed it with One pointAccent. I think it's pretty good. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER SnaRacing Stand Hook with Sprocket guard Type C
I installed it as a decoration! I don't know about the functionality of the Racing Stand since I haven't used it. View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERMaster cylinder guard
I bought it because of the design and color and I love it. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERClutch Lever & Brake Lever Set
I bought it because of the design and color and I love it! View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERFrame Hole Cap
I was concerned about the hole, so I put it on. one point and it looks good. View detail
Fits: YAMAHA MAJESTYS, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-25R, HONDA REBEL500, HONDA REBEL250, HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF
SNIPERSNIPEROil Filler Cap
Perfect for One pointAccent. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI ER-4N, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI ZX-6R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI NINJA1000
SNIPERSNIPERMaterial:AluminumBrake Lever Guard
I wanted to use Carbon, but it will not be in stock for 6 months, so I decided to use full Gold Spec. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Flexible angles
I was looking for something with an adjustable angle and came across this Fender lessKit.
This was my first time replacing it myself, but I was able to install it without any problems!
I tried to install it, but it stood out because the body is black and the kit is silver, so I painted it black and reinstalled it.
I am satisfied with the product, but if I had to say something, I would say that the License Plate Light is a bit large and assertive.
The angle of the Number can be adjusted, but not the back petals.
(I fix it at less than 40-Degrees inside the regulations)
I use the Nano Blinker, so I have not used the included Blinker sTaperts. I was satisfied with the product for such flexibility!
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
This is a great sprocket.
When replacing the small gear, I replaced it with a titanium bolt. The titanium bolt was not visible in the original cover, so I searched for several products. Among the sprocket covers, I chose this product because it made almost the entire small gear visible. I am very satisfied after trying it out myself. -------------------------------------------------- -------- We replaced it with a titanium bolt while replacing the small gear. The genuine cover was not visible, so I looked for several products, and I chose because this product could make it look almost all of the whole gear during the Sprokit cover. I'm so satisfied with it. Powered by Google Translator View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA RVF750R, KAWASAKI NINJA H2, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA1000, KAWASAKI NINJA250SL, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI VERSYS-X, KAWASAKI VERSYS1000, KAWASAKI Z1000, KAWASAKI Z250SL, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R
Satisfied
No change in performance. (Lol) Large, but it looks like I wanted it to. Black Engine, Frame, Swing Arm, Seat Cowl with a little accent. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
Sprocket cover installation
DAX125 has a lot of plating parts, and I was right in choosing Silver. View detail
Stand Hook
I installed this on my 23 cbr250rr. It is well secured and solid and I am not worried about it falling over. View detail
Fits: HONDA CBR600RR, KAWASAKI Z250SL, KAWASAKI Ninja250SL, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI 250TR, YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250R, HONDA XR400 Motard, HONDA XR250BAJA, HONDA XR250, HONDA XR230, HONDA VTR250, HONDA VFR800, HONDA SPACY125, HONDA PS250, HONDA PCX125, HONDA NSR250SP, HONDA NSR250SE
The NORMAL is installed as if it were covered by the NORMAL.
It is a system of increased armor that is placed on top of the NORMAL lid.
Since the body will be thicker, the screws will be replaced with the supplied ones.
The NORMAL screw is a +Screw, but the replacement screw is hexagonal, so it is better to have both ready before starting work so there is no need to panic.
The beautiful AnodizedRed complements the Grand prixRed of the Body.
How to dress up?
View detail
Put it on for now and acquire a sense of security
I bought this as a countermeasure against standing and staggering on the street in Main.
For CBR250RR, there are about 3-5 types of engine sliders, but the protrusion is longer and more secure.
The metallic red design makes it comfortable to wear and can be used as a substitute for colored parts.
I am worried if I really know how to put it on since there is no Instruction Manual.
Especially Quantity:Pair (for Left and Right) I didn't know which one to lengthen, and I also didn't know how to use the long stick at first.
Also, the price was a little high, so I would have liked it to be a little less expensive.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
Gives a clean, uncluttered impression
OEM's heavy Sprocket Cover was replaced for a cleaner look.
Whether maintenance is also improved is to be confirmed after using it in the future. At a glance, it seems to be easy to clean.
View detail