Reviews
Fits: HONDA PCX160, HONDA PCX, HONDA ADV150
Appearance and functionality
There is no rattling, the lever can be adjusted securely, and the grip, texture, and price are all good for this type of product.
If I had to say so, it would be better if it had a parking function!
There are a variety of inexpensive products on the market, but after much searching, I am glad I chose this product.
View detail
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
It is easy to operate and looks stylish.
Installed on a GSX-S125, almost OEM and comfortable. I chose the black color, so the Knob for adjustment is red, which is a good accent. It is adjustable, but it was not so useful for me because I have small hands and use it closest to the grips. (I think it would be useful for people with large hands who use the OEM Lever too close to the Grip). The quality is high, and I am satisfied with the non-slip finish on the part where the Lever's fingers hit the surface. View detail
Fits: HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB250F, HONDA CB250R, HONDA CB400F, HONDA CBR250R, HONDA CBR400R, HONDA CBR400R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA CB300R, HONDA CB150R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
I chose Brand again because it is a reliable Brand.
The look was good enough for me and I decided to go with SNIPER again. It is easy to use. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Good but not perfect
Made reasonably well and installed perfectly, unfortunately they arrived slightly damaged due to non-protective packaging, which is a shame. -------------------------------------------------- -------- Facted discreetly well and they are perfectly installed, unfortunately you get slightly ruined due to a non-protective packaging, pity. Powered by Google Translator View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Discrete
Beautiful but unfortunately arrived with some small aesthetic defects, due to poor packaging from the manufacturer and the supplier also considering the journey to be undertaken. -------------------------------------------------- -------- Beautiful but unfortunately you arrive with some small aesthetic flaws, due to a bad packaging of the manufacturer and supplier also given the journey to face. Powered by Google Translator View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERClutch Lever & Brake Lever Set
I bought it because of the design and color and I love it! View detail
Fits: HONDA CBR250RRR
Failure on Brake lever side
Although I am not dissatisfied with the appearance and functionality, the bolt threading holes on the Brake Side are not accurate enough to allow the bolt to be penetrated during installation.
I was forced to make a guess and installed it by penetrating it halfway, but for a moment I thought I had the wrong parts.
I may not buy it next time.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
Quality is fine, but be careful when using Handlebar Guard together.
The OEM brake lever seemed a little far away, so I decided to replace it with a brake lever with a grip distance adjuster.
The installation is not so difficult, and even an amateur can do it if he has Universal tools, so I did it myself at my own risk. However, there is no need to do anything to the brake fluid line; all you need to do is remove the bolt from the bracket where the lever is attached and replace the part. It was a bit tedious to remove the bolt. I had to loosen some parts around it.
After installation, I was able to use it comfortably.Adjust adjustment of Lever was also easy, and it was in a quite nice position.Quantity:Now that I can set the brake lever, it is easier to operate the brake at a moment's notice, so I don't have to keep my finger on the brake lever all the time, even on narrow small roads.
However, the tip of the lever interfered with ZETA's AdventureArmor Handguard, which was installed later, and hit it, making it impossible to grip the lever, so I removed it in tears. A little more. (5mm more) I had the option of cutting off the end of the Lever, since it was shorter and could be compatible without interference, but it was kind of a waste...
I'll sell it at GarageSale on Web!ke. (Lol)
The product itself is fine, Material:Aluminum and lightweight, I am satisfied with the quality.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Parenthesis OK
The 3D processing of Lever is very beautiful.
Tension goes up whether you are driving or looking at it.
Levers easily fall over, but I think I prefer them to be a little tighter.
Well, it is safe to say that in the event of a fall, it will fall right back down.
View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN S 650, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000, KAWASAKI VULCAN 650
It was the right decision to buy it.
It is easier to grip than OEM ones and I like the color.
However, I think it might be a little short.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It is slim and easy to use.
I used a UK made one on my first 25R, but the SNIPER one I had installed on my 6R was slimmer and easier to grip, so I bought one for my 25R as well.
The fact that it is Foldable was also a Point of Purchase.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
It is easy to install.
I think the play of the attachment part is a little too large, but the feel is good. View detail
Fits: HONDA CBR250RRR
Easy Exchange
It was easy to replace the clutch, but I felt some wobble when operating the clutch and breaking the foldable for the first time, and I wondered if this was just a normal thing.
Easy to grip, lever position adjustable, and cutting is great!
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
textured good feeling
Easy to use and adjust. Maybe Large sturdy even when tipping over. View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
I am satisfied with the position adjustment.
I replaced it because I had small hands and felt that Lever was too far away.
I don't like Short lever, so I looked for a long lever.
We decided to go with this Lever.
There is some Wobble, but it is within expectations for this type of Lever.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER 125, KAWASAKI Z250SL, KAWASAKI Ninja250SL, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI D Tracker X, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI Z125 PRO, KAWASAKI Z125 PRO
Slightly inaccurate and rattling. Slip resistance is ____.
[How is it used?
On the Ninja 400, the OEM is too far away from the levers and has no adjustability.
Was the installation difficult?
If you have a solid tool, even an amateur can do it in 30 minutes.
How was your experience with it?
It's somewhat inaccurate, and the rattle is more annoying than OEM. Especially the Brake Side has a squishy feel and the Touch is not very good.
I have a Spacer Washer that I bite into, but it doesn't heal completely, so I'm considering changing to something else.
I appreciate the non-slip surface.
[Opinions and requests to Manufacturer
I trust SNIPER as a brand because they have a lot of results in Asia championships especially for Kawasaki, but honestly, this product is not very useful.
I would like to use this manufacturer in the future and I hope that they will continue to improve the quality of their products.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER 125, KAWASAKI Z250SL, KAWASAKI Ninja250SL, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI D Tracker X, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI Z125 PRO, KAWASAKI Z125 PRO
I need a short lever.
Easy to use with a wide range of grip adjustment
I just wanted a short lever.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
Total coordinate
I bought this product because I wanted to unify the anodized parts of this motorcycle with Red. 6-step adjustable Foldable, I chose this product because of the color Red, Foldable, and the price, although Lever is also available from other manufacturers. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Lever
We replaced it with a movable type in case of a fall.
The installation was fine and I don't mind the rattle etc.
I think it is better than OEMParts.
However, if you don't set the Clutch Side at 4 or more because of StartAssist, the RPM will keep going up when you put it in 1st gear, so be careful if you have small hands.
View detail