Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER SnaRacing Stand Hook with Sprocket guard Type C
I installed it as a decoration! I don't know about the functionality of the Racing Stand since I haven't used it. View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03
Stand Hook for easy lift up
Purchased for use with Racing Stand.
Compared to the Spool type, the Spool type does not protrude laterally and has a smaller Damage at the time of tipping.
The installation seems to be a hassle since the Type requires fine adjustment. The structure is such that it is likely to shift its position while being used.
It can be used without any problem in terms of feel. The texture is not bad.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It also prevents damage in the event of a fall.
I changed to Racing Stand Hook in consideration of tipping over because of circuit driving.
You can use JTrip's STAND.
The color selected was Green Light because it is Kawasaki.
Color Matching is good.
View detail
Stand Hook
I installed this on my 23 cbr250rr. It is well secured and solid and I am not worried about it falling over. View detail
Dress-up
Using Lift jack is now much easier.
The installation was a bit tricky, as the angle of the fixing spacer needed to be adjusted when tightening the bolt.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Prevention of damage in the event of a fall
Bobbin type was replaced with Plate type because the Swing Arm was damaged when it tipped over.
Plate is thick and rigid, but a little heavy. (about 120~30g) I wish it was under Spring so I could have had it butchered or something.
It also serves as a Sprocket guard, but the distance is too far away to have much of a Guard feel.
The feel is more stable than Bobbin type.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It has presence!
It has more presence when viewed from the SIDE than the common circular Stand Hook. It is highly self-satisfying. (Lol) View detail
Maintenance
I bought it to run the VHook, and I personally think it's a necessary piece of equipment for working alone. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Bolt is heavy
I changed from Hook type to Plate type.
The weight of the Hook type is about 54g (Both Sides), while the weight of the Aluminum Bolt is about 140g + 95g, which is a little heavier.
Hook type is prone to damage on the swing arm, but this product can be hung with little concern.
The stability and lift resistance is better than the Hook type.
Sprocket guard is attached, but the distance to the chain is far, and I think it is less protective than the one attached separately to the Swing Arm, but only a real Racer would care that much...
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Stable
With a normal StudType, the head of the Bolt will surely be shredded off when it is cocked, and the core of the Bolt will remain in the Swing Arm, which is Large. If you are not careful, the bolt may be torn off from the Swing Arm. This product is almost flush with the Swing Arm, so it will be durable and will not interfere with the Exhaust System. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
Mounted with 8BL-ZXT02L
It's also convenient for maintenance.
I am satisfied because it looks good.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It is easy to install. and STAND easy to hang.
The careful Instruction Manual allows you to install without hesitation. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
There is a sense of stability and security in STAND use
Installed together with J-TRIP's VPlate receiver (JT-R107W) for use with NANKAI×J TRIP's NarrowRoller stand. (STAND confirmed to be compatible) And it is ExactlyFit without a problem as shown in the product description.
I also took into account the opinion that the V receptacle is more stable, and I like the design and bought this product.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Parenthesis good!
I chose Black.
I regret that I didn't choose a different color in the play color Point…
Looks like Race ish and Parenthesis good!
VPlate is easier to up than Hook.
I think anyone can install it if they read the Instruction Manual.
I think I need a Screw lock agent.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
V-Shaped Stand Hook
I chose this hook to improve maintenance and dress-up. I thought it would be more unique than the round type Stand Hook, so I chose the V shape.
The receiving part on the STAND side was also a little pricey, but I'm highly satisfied.
There seems to be a Merit that prevents the accident that the Bolt is broken and the broken Bolt remains in the body of the car in case of a fall. I see. I don't want to be sure, but...
The sprocket guard is black, which is a nice touch that adds functionality without being too subtle.
I haven't compared it to the round Type, but the Lift up wasn't that hard either.
When installing, I found it a little difficult to find the position.
The eccentric collar is used to adjust the position of the Swing Arm. Is this a response to individual differences? I'm a little worried that I might have made a mistake, but I believe it's large and sturdy because it's not loose and lift up is no problem...
Since there are many fastening parts, it is necessary to inspect regularly for looseness.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It makes me feel a little race ish.
Rear stand10,000 yen to 15,000 yen
Included Parts:About 5,000 yen
Racing Stand Hook12,000 yen?
But it's convenient.
Put a tree or something on the Side Stand to make it more centered, and then put the Rear Stand on it.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Racing Stand Hook
It's a SNIPER product, so I think it's reliable for parts. (In a durable sense.)
This is a so-called V-shaped Stand Hook, which looks like a race ish.
It comes with a sprocket guard.
The manual is included and two SNIPER stickers are included.
Notes
It will be delivered as a looseRoseRose, not assembled. It looks simple, but the V-shape needs to be assembled.
The warning sign says that a mechanic should install it. If you don't have confidence, don't force yourself and ask a mechanic to do it.
Or you can install it with just one bolt, which is the most commonly used spool type.
Be sure to re-tighten the bolts as there are many of them and use a screw loosening stopper.
Assembly hang
There are 8 Hexagon Bolts. There are 8 Hexagon bolts. 4 of them are of different length and 4 of the same length.
Line up the bolts in lengthwise order before assembly.
It is written in the instruction manual where the bolts are to be assembled. The length of the bolts is the most important factor.
Temporarily assemble it before installing it to the body.
The ZX-25R comes with a screw hole to attach the Stand Hook to the car body.
It is not difficult to install it to the body of the car because it is only one bolt.
Adjust the preliminary assembly of Stand Hook to see if it is assembled correctly.
It is very important to adjust the Black Round Parts that interfere with the Swing Arm.
Remove from the body and tighten the bolts to complete the assembly.
You only need one Hexagon Bolt to install it on the body of the car and that's it.
Satisfaction
Parts are processed with beautiful gold because it's like a SNIPER.
The price is more than 10,000 yen, which is more than twice as much as the Spool type sold for about 5,000 yen, but the appearance is totally different.
Think of the difference in price as the difference in appearance. The difference in price is the difference in appearance.
Recommended.
If you want to install it cheaply and easily, I recommend the Spool type.
If you want to look like a gorgeous race ish, this is the product for you.
Installation is not a problem for those who regularly play with motorcycles.
If you're not familiar with it, you should have a mechanic do it for you. It's very sad to hear that a motorcycle has fallen out of STAND due to a lack of installation.
View detail