Reviews
Slightly Larger
The original is in a Case. It is a little large and the material is hard. I tried to fold it into a smaller size, but it was impossible! It takes a little time to take it out of the case and to put it away. I think it will be no problem for day-touring or running around the neighborhood without luggage. View detail
Chinese quality
[How is it used?
I installed Fog Lamp on FZS600 and introduced IndicatorSwitch with Fog Mark as a measure against vehicle inspection.
Was the one you received as per Image?
The quality is a bit disappointing. The Fog Mark was mounted on the Body with a slight tilt. I tried to fix it in the correct position by removing the rubber cover of the bellows, but it was fixed so tightly that I could not do it. I tried to remove the rubber cover from the bellows and fix it in the correct position, but it was not possible because it was firmly fixed in place.
Was the installation difficult?
I installed it on a DRC bar mount, but it does not match the bar diameter slightly and there is a gap on the mounting surface, but I managed to install it. I used Screw Loosening Fluid because the gap was not tight enough to fit the bar and the Screw was about to loosen.
How was your experience with it?
I was worried that the blue light of the Indicator might be bothersome to my eyes when it is turned on at night, but it did not bother me much while driving. During the touring, I drove in heavy rain several times, but the waterproof performance was fine.
[Included Parts:were they on?
Includes a complete set of parts needed to turn on the fog.
[Was there anything that disappointed you?
The functionality as a Switch is fine, but the quality is not so good.
Other items that would be helpful
(1) Point of attachment or hang:Depending on the mounting position and angle of the Switch, Blue light may be a concern when driving at night?
2) Availability and clarity of Instruction Manual:I think it is relatively easy to understand because it is illustrated.
(3) Note:Ensure that Wiring is handled without undue force and Connectors are connected.
4) Items to buy together:Screw loosening fluid.
(5) Opinions and requests to Manufacturer:Improve quality and assembly accuracy.
View detail
LEDColor:Yellow
I replaced my OEM headlight with a Multi-reflector headlight and am using a 6500K LED Bulb, but now that a Yellow Bulb is available, I wanted to see the difference.
Color:Yellow didn't feel as dark as I thought it would.
Note that Motorcycle after 2006 is a violation.
I think it would look great on an old car.
View detail
It is quite dark for a Headlight Bulb.
[How is it used?
Purchased to save power over NORMALHalogen bulb.
Was the one you received as per Image?
The Package was poorly packaged with simple packaging, but the product itself is fine.
Heat sink is solid and not as badly made as I expected.
Was the installation difficult?
Installation is easy, as the valve is simply replaced.
How was your experience with it?
The LEDs are only on one side, so they seem darker than the latest LED bulbs. It is not likely to pass the vehicle inspection, and it is not suitable for a large motorbike.
[Included Parts:were they on?
Nothing is attached.
[Was there anything that disappointed you?
The drawback is that it is dark for low power consumption.
Recommendation for more high Watt bright LED Bulb.
▼The H4Type is sold out, and I feel that this functionality has reached its limits; it is a Headlight Bulb, so it is useless without functionality, so I can't shake the feeling that it has been eliminated as a result of the evolution of more high Watt LED Bulbhe.
View detail
For the price
I installed it on a PCXJK05 FrontDamper, but it's not easy to install on the disc brake side.
The Motorcycle side was scratched because it was uneven and gapped as it was being attached.
Rubber sheet is attached to the bracket, but if it is not fixed to the bracket, the rubber gapes and this is difficult to do.
You should inspect it regularly.
View detail
Fine
Easy on the eyes. The specification states that 2 bulbs will give 3200/3600lumen brightness because one bulb only gives about 1800 lumens, this is very misleading I should have chosen your higher-end product ----- --------------------------------------------------- --- Thuan eyes are easy to see. Specifications specify 2 balls will give 3200/3600lumen brightness because one shadow only gives the brightness of about 1800 lumen, this is very easy to mislead I should choose your more advanced product. Powered by Google Translator View detail
Price suitable
It's worth the price
It doesn't feel as bright as 6000k.
I still think it is better to buy a good Large hand
Sufficient for driving in the center of the city.
View detail
Check for conformity with a knowledgeable person.
I had already replaced the OEMSmall blinker on my SR400 with a 15WType (OEM) Relay, so I thought I could install it with a bonnet, but it turned out to be a high flasher, so I ended up replacing it with a LED Relay at a motorcycle shop. The blinker of course lit up OK, but the SignalLamp of the Meter was so dark that I replaced it with a LED Lamp as well.
It turned out to be quite expensive with labor charges, etc. I wish I had consulted Motorcycle shop from the beginning.
The brightness is satisfactory for Large.
View detail
That's about it.
The brightness is acceptable. Some kind of Bracket is necessary for installation, and whether the Wiring is on by a key or by another Switch depends on the Skill of the person who installs it. In the picture, Hexagonal Wrench is Quantity:It's a 2pc picture, but there's one in there, and it's loose enough to lick, too.
Both Bolt and Nut, which are supposed to be 10mm, are pleasantly loose. I'm not sure how durable they are yet, but hopefully they will last.
View detail
important point
important point
I checked the LIVEDio ZX-2002 in the compatibility chart and it was circle in PH11, so I bought it.
However, his own Valve is the First Model Type before ZX regulation, and the Valve shape called PH8X
Early pre-regulation ph8x
Pre- and post-regulation period - Post-regulation ph11
I should have opened it and looked at it before I bought it.
but the Head part is completely different between `96 and `97
But it is not listed in the Manufacturer's conformity chart.
Still, I could check the lights, so I ran the Engine and checked the lights, but
High flasher happened when I put Blinker on.
As the previous poster wrote, the high and low Wiring is reversed, so if you use the Bullet Terminal connection
Red Wiring on LED side should be attached to Blue (High) on Valve side Connector, Green is Black.
Fortunately, there is a car model after the regulation, and Valve of it is PH11, so I transplanted the head.
It has a blinker relay to prevent high flasher, so I'm going to put it on and see.
View detail