Reviews
Fits: SUZUKI Vstrom 250, SUZUKI GSR250, SUZUKI GSX250, SUZUKI GSX250R, SUZUKI GSX250, SUZUKI GSX250R
perfect product and high quality ! View detail
For anti-seizing.
It was used to refresh the cooling area of MAJESTY125 for bore up.
I am still afraid of burning out as the weather gets warmer in the coming months, so I decided to purchase the WaterLine because I thought it would be a good idea to review it as well.
It is inexpensive, but the product is well made and can be used without any problems.
The body already has 60,000 km on it, so I believe it works much better.
View detail
It's a great cosmetic
Used to Refresh MAJESTY 125.
We chose the Bore Up Kit because we wanted to do something about the inefficient acceleration if we were going to do it anyway.
It is much cheaper than OEM Type Cylinder, but the quality and precision are perfect.
Since there is no instruction manual included, I think it will be quite tough if you do not have the skills to make your own motorcycle loose to some extent.
It seems that the 160cc engine finally has the acceleration power that is commensurate with the large size of the body.
I think it will be much easier to overtake, start at a traffic light, and start at Tandem.
View detail
No problem
I used it on the Engine of my CB125T which I am using as a RoseRose.
All the main Gaskets are included. What was unexpected, in a good way, was that the rubber packing for the head cover was also included.
It was very helpful because if I had taken it off, I would have been rattled.
When I bought a Cylinder kit at the same time, it also came with a Head Gasket, but it is not expensive, so it is good.
This Engine seems to be copied a lot on Large land, so it would be nice to have a Knock Pin Set or something.
View detail
Fits: YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA DT230 LANZA (DT230), YAMAHA WR250X, YAMAHA SEROW225, YAMAHA WR250R
It looks like a certain Manufacturer's product...
[How is it used?
I purchased this product during the Restore of SEROW225 WE and it was a Timing Well Sale item at Webike, so I was able to save even more than usual.
However, the price of the product is not that of a certain D0C product in the first place. Pi0t Lever CP." Quantity in Gold amount for One Side:Pair (for Left and Right) The product is originally Reasonable because it is sold at a price so low that it can be purchased by
They look very similar and to a stranger. It's wearing an expensive-looking lever of the billet type." It can create a sense of
How did you like it?
It is not clear if it is as rigid as the original, but it also has the same Pivot function, which makes it difficult for the lever to break even if it falls over slightly.
My SEROW is Material:The aluminum handlebar guard is also a factor in reducing lever breakage, but for amateur mountain play, the difference between the original product and the new one is almost unnoticeable. (Incidentally, the SEROW250 I bought used had the original Lever installed from the beginning.) 。
How did it compare to other products?
I have used this product and the original DR0 pipod Lever, and as I mentioned above, it is so well made that you can't tell unless you are told in Large roughly.
The Nylon washer-like material used in the bolt that adjusts the grip is weak and easily crushed, making it difficult to adjust, but the others parts are as good as the original product.
I have not checked the strength of both products because it would be a waste, but both products have been used without damage under similar conditions.
[Points to note]
As mentioned above, the only thing to do is to tighten the Bolt moderately to adjust the grip.
Grease up each moving part and joint thoroughly.
Other items that would be helpful
The deciding factor in the purchase
Made by 0RC Pi0t Lever CP." Because the price is less than half of the price of a Levar that looks like a Levar.
【Included Parts:presence or absence】.
Quantity of Brake lever and Clutch lever:Pair (for Left and Right) There are no other Included Parts:.
[ITEMS TO BUY TOGETHER
Although it is cheaper than the original product, it still costs 6,000 yen, so if you attach a sturdy Handlebar Guard, it will protect not only your lever but also your hand in case of a fall, so you can feel even safer.
Opinions and requests to Manufacturer.
From now on. It's ____-ish." Please take care of our products at Reasonable prices.
[Points to note]
As mentioned above, the only thing to do is to tighten the Bolt moderately to adjust the grip.
Grease up each moving part and joint thoroughly.
Other items that would be helpful
The deciding factor in the purchase
Made by 0RC Pi0t Lever CP." Because the price is less than half of the price of a Levar that looks like a Levar.
【Included Parts:presence or absence】.
Quantity of Brake lever and Clutch lever:Pair (for Left and Right) There are no other Included Parts:.
[ITEMS TO BUY TOGETHER
Although it is cheaper than the original product, it still costs 6,000 yen, so if you attach a sturdy Handlebar Guard, it will protect not only your lever but also your hand in case of a fall, so you can feel even safer.
Opinions and requests to Manufacturer.
From now on. It's ____-ish." Please take care of our products at Reasonable prices.
View detail
Gasket and oil seal are included in the price.
Since the OEM Clutch Cover Gasket is about 2100 yen, this price is a good price for the Gear case Gasket and Oil seal included.
However, compared to OEM Gasket, the cut edges are rough and BALI is more common, so the quality of the appearance is clearly lower.
I haven't used it yet because I bought it as a spare after using the OEM I had on hand, but it would be nice to have one Stock.
The Gasket on the neck has not been used yet, but it will go to the warehouse until the time comes to maintain it someday.
View detail
replacement head gasket
I received the full set but only the head gasket was dented. I have write in and Webike was so kind that help me to replcae the dented piece. Many thanks Webike team. View detail
Fits: HONDA LIVE DIO ZX, HONDA SUPER DIO ZX, HONDA DIO ZX
Brake Lever Set
Brake Lever Set Do you like the texture?
The angularity makes it a little uncomfortable.
View detail
problem-solving
I had a problem with the stop-lamp switch for my diverted rear sets that I made myself, but this product solved the problem. View detail
Thank you for the help
I was able to install it on a LIVE DIOZX AF35 Initial Model.
I am glad I was able to fix it because it was the first Motorcycle I bought in my life and I have a lot of feelings for it.
It really helped us because OEMs are out of business.
Symptoms that did not generate power were cured perfectly.
View detail
I got out of Setting with ease.
Vehicle used HondaNS1 first half 68.8Bore up vehicle
I bought this carburetor after having a hard time finding a Setting with the PE24 Carburetor. I got the best Setting that day.
I think there is a difference in each vehicle, but Slow Jet 52, Main Jet 110, JetScrew is at the smallest aperture close to OFF, and Jet needlePin position is in the middle. I was satisfied with this setting because I was not looking for such a high speed, but the limit value of 100 km/h was reached on a flat straight line where there is no restriction by law. In addition, the external material for PWK:AluminumIdle Screws and Air Screws are available in Quantity:It is possible to set, but it would be better not to do so. The external Idle Screw was clogged with gold fragments due to rubbing, and the external Air Screw had no O-ring and the adjustment screw was in the wrong position, making adjustment unstable due to 2-dimensional air intake. As a result, the needle included from the beginning is the best and most stable rather than focusing on appearance. [Color] The ClearFloat chamber is Standard Equipment and the oil level is clearly visible. Overall, I would rate this carburetor as a well-made carburetor that is easy to handle for the price.
View detail
Fits: KAWASAKI GPX600 R, KAWASAKI GPX600 R, KAWASAKI GPZ600 R, KAWASAKI KEF300 Lakota, KAWASAKI KLF300 Bayou., KAWASAKI VN1500, KAWASAKI VN750, KAWASAKI ZL600 B Eliminator, KAWASAKI ZL600 Eliminator, KAWASAKI ZR750 Zephyr, KAWASAKI ZX600D, KAWASAKI ZXR400 L, KAWASAKI ZZR600, KAWASAKI ZZR600 D, KAWASAKI ZZR600 E, KAWASAKI VN1500, KAWASAKI ZX6R, KAWASAKI ZXR400
Regulator
I replaced the A-TopRegulator due to unstable voltage.
Voltage is stable and in good shape so far.
I expect it to be durable.
View detail
Fits: HONDA XL Degree 2, HONDA XLR250R(BAJA), HONDA CRM250R, HONDA CRM250R AR, HONDA XR250(BAJA), HONDA XR250 Motard, HONDA XR250-2, HONDA SL230, HONDA XR230, HONDA XL Degree
Oni Kospa!
[How is it used?
For the increased number of MOTARDWheel
How was your experience with it?
The dimensions are perfect.
How did it compare to other products?
Pre/Post discQuantity:This is a set with very good cost performance. If you are in doubt, this is a good choice!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
No doubt!
I can pimp it with no problem at all!
The problem is not with this product, but with thisQuantity:Fog Lamp to be set!
If you are a rider who needs brightness, you may consider a Fog Lamp with a large size, but the biggest problem is the size of the Fog Lamp. (Length when installed) It is
The Fog Lamp was designed to be compact from the beginning, so there was no problem with the quantity.:I was able to set it, but still there was not enough room for clearance with the Front Fender, and it was Limit at the Full Bottom of the Front Fork. (Sweat)
I'm going to change the subject, but a similar product to this one is Ama-Xan." However, it is said that it requires modification due to problems such as the Bolt position not matching or interfering with the Body, so be careful!
Quantity of Fog Lamps in the lower part of the Headlight Compact:If you're going to set, you can't go wrong with this one from Coco's!
View detail
Attacks from Pad.
Damage to the disc because I used Red Pad up to the seat Gold...
2.Since the ADDRESS 110 had been used for 60,000 km, the difference between the surface that hits and the surface that does not hit became a concern, so we replaced it.
The price was reasonable and the installation was done without any problems.
The pads were replaced at the same time as the brembo pads, so they were not in full effect during the normalizing phase.
About a month has passed and I am not sure if Pad is better or disc is better, but it feels like a good disc.
View detail
THE carb kit
An incredible value for money and really complete, everything is there. Even the O-rings for the tees between the carburettor bodies are provided. The membranes of the bushels are changed without problem which avoids having to buy them complete. -------------------------------------------------- -------- An incredible and really complete value for money, all is there. Even the toric seals of the tees between the carburetor bodies are provided. The membranes of the bushels change without problem which avoids having to buy them complete. Powered by Google Translator View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Increase mileage
My motorcycle is YAMAHA NMAX155. The fuel tank design of this motorcycle is only 6.6L. It is a bit small for me who lives in the suburbs. I often need to refuel, so I bought this ATop on webike Large-capacity fuel tank, its capacity has been increased to 9L, so that the cruising range can reach more than 300KM, and the original package is installed without damage. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. This motorcycle's fuel tank design is only 6.6L. For me living in the suburbs of the city, I often need to refuel in areas. In large -capacity fuel tanks, its capacity increases to 9L, so that the range can reach more than 300km, and the original is not damaged. Powered by Google Translator View detail
convenient stand
My motorcycle is YAMAHA XMAX300. There is no place to install the extended recorder and mobile phone holder on this car, and the bundled installation is not very stable, so I bought this ATOP extension holder on webike. This holder is installed on the windshield. It will not block the dashboard, nor will it take up the handlebars. There are many installation positions on it to easily install mobile phone holders and recorders, which is very convenient. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. This bike is not installed with the position of the expansion recorder and mobile phone bracket. The bundle installation is not stable, so I buy this ATOP expansion bracket on Webike. This stand is installed in the windshield position. It will not block the dashboard, nor does it take up the handbars. There are many installation locations that can be convenient to install the mobile phone bracket and recorder, which is very convenient. Powered by Google Translator View detail
Fits: YAMAHA CELLOW 250, YAMAHA XT250, YAMAHA XT250S, YAMAHA Tricker 250, YAMAHA XG250, YAMAHA XG250S
For 2014 XG250 TRICKERS
Purchased for a 2014 XG250 TRICKER, chose this one due to the high OEM price. No modification was required and it was installed without modification. It works great. View detail
Excellent clear glass
"About quality and texture
Excellent quality of casting plastic glasses, corrugation as on the original, the diffuser also works as it should, three glasses are installed in standard latches and grooves, the glasses also fit together correctly, without gaps, which I was surprised, since this is not an original and the manufacturer is not Japan
About the feeling of use
Great experience and great looks, easy installation, comes with 3 taillight glass and license plate light glass, all in very good tolerances, workmanship is high even though made in China
On the attached photo you can see how this set looks live
Products to buy together
It is required to buy a red lamp as the glass is transparent and the white light inside is unacceptable in some states
Difficulty of installation
Easy installation to replace the original, only need a Phillips screwdriver to unscrew the two screws
Cost performance and comparison with other products
Very low price, good workmanship and fit can compete with more famous manufacturers
About shipping and packaging
Simple packaging in a bag, as well as additional packaging of Webike before shipping
Any concerns, cautions, or advice when purchasing
Before buying, find the red brake light in advance
-------------------------------------------------- -------- About Quality and Texture Excellent quality of casting plastic glasses, corrugation as on the original, the diffuser also works as it should, three glasses are installed in standard latches and grooves, also the glasses are joined correctly, without gaps, which I was surprised, since this is not the original and the manufacturer is not Japan About the Feeling of Use Excellent impressions and a great appearance, light installation, three glasses for the rear light and the glass backlight are delivered in the kit , all in very good tolerances, the accuracy of manufacture is high, although it is made in China In the attached photo you can see how this kit looks live Products to Buy Together It is required to buy a red lamp since the glass is transparent and white light inside is unacceptable in some states Difficulty of Installation Light installation in return original, you will need only a cross screwdriver for unscrewing two scr ews COST Performance and Comparison with Other Products Very low price, good quality manufacturing and fitting may well compete with more eminent manufacturers ABOUT SHIPPing and PACKAGING Simple packaging in the package, as well as webike dopakovka before sending Any Concerns, Countions, Or Advice When Purchacing Before buying in advance, find the red lamp of the stop signal Powered by Google Translator"
View detail