Reviews
Fits: YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA DT230 LANZA (DT230), YAMAHA WR250X, YAMAHA SEROW225, YAMAHA WR250R
It looks like a certain Manufacturer's product...
[How is it used?
I purchased this product during the Restore of SEROW225 WE and it was a Timing Well Sale item at Webike, so I was able to save even more than usual.
However, the price of the product is not that of a certain D0C product in the first place. Pi0t Lever CP." Quantity in Gold amount for One Side:Pair (for Left and Right) The product is originally Reasonable because it is sold at a price so low that it can be purchased by
They look very similar and to a stranger. It's wearing an expensive-looking lever of the billet type." It can create a sense of
How did you like it?
It is not clear if it is as rigid as the original, but it also has the same Pivot function, which makes it difficult for the lever to break even if it falls over slightly.
My SEROW is Material:The aluminum handlebar guard is also a factor in reducing lever breakage, but for amateur mountain play, the difference between the original product and the new one is almost unnoticeable. (Incidentally, the SEROW250 I bought used had the original Lever installed from the beginning.) 。
How did it compare to other products?
I have used this product and the original DR0 pipod Lever, and as I mentioned above, it is so well made that you can't tell unless you are told in Large roughly.
The Nylon washer-like material used in the bolt that adjusts the grip is weak and easily crushed, making it difficult to adjust, but the others parts are as good as the original product.
I have not checked the strength of both products because it would be a waste, but both products have been used without damage under similar conditions.
[Points to note]
As mentioned above, the only thing to do is to tighten the Bolt moderately to adjust the grip.
Grease up each moving part and joint thoroughly.
Other items that would be helpful
The deciding factor in the purchase
Made by 0RC Pi0t Lever CP." Because the price is less than half of the price of a Levar that looks like a Levar.
【Included Parts:presence or absence】.
Quantity of Brake lever and Clutch lever:Pair (for Left and Right) There are no other Included Parts:.
[ITEMS TO BUY TOGETHER
Although it is cheaper than the original product, it still costs 6,000 yen, so if you attach a sturdy Handlebar Guard, it will protect not only your lever but also your hand in case of a fall, so you can feel even safer.
Opinions and requests to Manufacturer.
From now on. It's ____-ish." Please take care of our products at Reasonable prices.
[Points to note]
As mentioned above, the only thing to do is to tighten the Bolt moderately to adjust the grip.
Grease up each moving part and joint thoroughly.
Other items that would be helpful
The deciding factor in the purchase
Made by 0RC Pi0t Lever CP." Because the price is less than half of the price of a Levar that looks like a Levar.
【Included Parts:presence or absence】.
Quantity of Brake lever and Clutch lever:Pair (for Left and Right) There are no other Included Parts:.
[ITEMS TO BUY TOGETHER
Although it is cheaper than the original product, it still costs 6,000 yen, so if you attach a sturdy Handlebar Guard, it will protect not only your lever but also your hand in case of a fall, so you can feel even safer.
Opinions and requests to Manufacturer.
From now on. It's ____-ish." Please take care of our products at Reasonable prices.
View detail
Fits: HONDA LIVE DIO ZX, HONDA SUPER DIO ZX, HONDA DIO ZX
Brake Lever Set
Brake Lever Set Do you like the texture?
The angularity makes it a little uncomfortable.
View detail
Installation itself was difficult; Shield gave up.
The installation itself is extremely difficult. The Image is a flat steel plate that is forcibly tightened to the originally curved front with screws. Even if I managed to install it, I gave up because the screw holes in the Shield do not fit and the load on the part is even greater, and it could be destroyed. I will return to OEM as soon as possible. View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker 125, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI 250TR
Foldable and at this price! Highly recommended!
[How is it used?
It is always used when holding Lever. It is a place that is quite visible when driving, so it is full of custom feeling. It is sure to stand out.
Was the one you received as per Image?
Green Light color is also very good. Good texture and just like the Image.
Was the installation difficult?
Installation is easy if you have the right tools.
How was your experience with it?
The length of the lever is adjustable, which is great because you can adjust it to your preference, and because it is foldable, there is less risk of the lever breaking in the event of a fall (increasing the chance of getting back home on your own).
[Included Parts:were they on?
Lever set only
[Was there anything that disappointed you?
None
Other items that would be helpful
Point and hang of installation
Just remove and replace the OEMLever; Grease would be nice to have.
[With or without Instruction Manual
No Instruction Manual, but it's just to replace it, so it's not really necessary.
View detail
not worth discussing at all
Although the total length of the wire itself is the same, the holder installation position (wire adjustment position) is completely different and cannot be installed.
The NC35 is included in the list of compatible vehicles, but it is completely useless.
View detail
Fits: YAMAHA X-MAX250, YAMAHA X-MAX300, YAMAHA XMAX300, YAMAHA X-MAX250, YAMAHA X-MAX300, YAMAHA XMAX300
It's cooler now, but...
It is easy to install and the style is better, because the position of Mirror has become farther and the field of view has become narrower, there is a difference in the ease of seeing compared with OEM. In addition, because it is movable at the installation part, the board Spring is sandwiched, and when it runs, the vibration is generated and the vehicle behind can only be seen by the blur. I'm wondering if I should go back to OEM because it doesn't change even if I tighten the mounting bolt strongly.
It's a pity because I like Style after installation.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA YZF-R3
No installation guide
Im very disappointed for this item. The materials box and appearance looks so cheap and not quality. Obviosly from china. Very expensive for this item. Wasting money. No installation guide and can not search on internet how to install it. View detail
Fits: YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA WR250X, YAMAHA DT230 LANZA (DT230), YAMAHA SEROW225, YAMAHA WR250R
Easy to operate!
Installation is easy
It doesn't feel bad in the grip
The best part is that you can adjust the play
Price also for Clutch and Brake Quantity:For the price of the set
I think it's cheap
I removed the rubber cover because it cannot be installed
(I'm wearing a Lever Cover to keep it from getting cold in the winter
View detail