Reviews
Fits: YAMAHA XSR700, YAMAHA XSR700
Paris bag
We purchased this Bracket because the OEM Product was sticking out and felt like it was floating.
It is now in front and much better than NORMAL.
But the keys are a little Large weird!
View detail
Bright and easy to see
[How is it used?
In accordance with the conversion to Fender Eliminator
Was the one you received as per Image?
Satisfied with the solid construction.
Was the installation difficult?
Wiring was not very clear and I had to short it and Fuse jumped.
How was your experience with it?
It is quite bright and could be a little more Compact.
[Included Parts:were they on?
as described
[Was there anything that disappointed you?
A lower price would be appreciated.
Fuse flew during Lighting Check.
It might be a good idea to prepare Fuse in advance for installation.
View detail
Moderately Small
The size is moderately small and easy to use.
MT07 fitment is attached, but it can be installed as long as there is an M8 hole.
Note that the wiring is ultra-thin wiring and the available Bullet Terminal is smaller than the normal Bullet Terminal.
Wiring processing is required.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
The ability to change the position of the Meter is fulfilled, but
[How is it used?
The OEM has the Meter positioned directly above the Handlebar, which cannot be seen by simply moving your eyes and requires you to lower your head slightly.
Since I am a beginner in Motorcycle, I often check the Meter, but I found it a little inconvenient, so I purchased this product whose position can be changed to the back side.
Was the one you received as per Image?
One of the screw holes was not painted. This is not visible after installation.
The included screws are silver, and they look a little like they are floating around the handlebar, which is all black.
The Silver component that attaches to the back is just a cut aluminum plate, and the lines and writing on the aluminum plate were left intact. The lines and letters on the aluminum plate were still there. The machining accuracy was not a problem.
Was the installation difficult?
I tried to install it according to the instructions in the instruction manual (see attached picture), but the rubber bush (I think it's called) almost tore off.
Because I tried to install the cable without considering its routing, I had to install and remove the part several times.
How was your experience with it?
It is very comfortable to have the Meter come to the edge of my field of vision where I can see it very easily and check it at a glance.
[Included Parts:were they on?
[Was there anything that disappointed you?
1. some areas are not painted.
2.Screw is different from OEM (Black) (Silver)
3. the board to be applied to the back side is an aluminum board as it is, so it looks very fake.
It serves the purpose of changing the position of the Meter, so it may not be a Level to return, but I am somewhat doubtful that Motorcycle products are so Large-tasting.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
The angle is …
Styling effect is Outclassing, as many other companies have Pipe type!
However, the angle of the Meter is slightly Up, so the angle needs to be corrected.
The paint on the Edge was peeling in several places, so I thought it might be an overseas manufacturer;
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
of good quality
The product itself is very solid and not cheap looking.
Since it is installed in a place where it cannot be seen, I am not particular about its appearance, but it can be installed with peace of mind.
The performance is fine and I expect it to be durable.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
It is well made.
The product itself is very well made and does not look cheap at all. I am not particular about the appearance of the product since it is installed in a place where it cannot be seen, but I can install it with peace of mind. I have no problems with the performance of this product and I expect it to be durable. View detail
MT-07 with round eyes spec.
It is one of the options for those who want to make their MT-07 a round-eyed Spec.
Note that there are different types of Covers for different years.
Exclusive Design (same as XSR700) so it can be installed with Refreshing.
However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.
Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.
The Instruction Manual is entirely in German.
If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
The Headlight area is neat.
This is the Front Blinker I bought when I made my MT-07 into a SCRAMBLER Custom.
It contains a pair of Blinkers and a Heat Shrink Tube.
Jvb has a Harness for YAMAHA motorcycles on the market and you can install it without any care.
I processed it with Bullet terminal.
Heat Shrink Tube is done with a heat gun, but I shrunk it by burning it with Burner of the CD can so that it may not become a direct fire.
It will be an LED Blinker, so the OEM Blinker relay will not work correctly.
An external LED compatible Relay is required.
I'm ↓ so it's working correctly.
https://www.webike.net/sd/24232608/
Relay is easy to replace.
Installation position is under the handlebar of the front brake and clutch lever.
Co-tighten the Nut on the Handlebar side.
Quantity:Pair (for Left and Right) In a sense, it's safe to say that you can't put it on by mistake because the shape is different.
I don't think there are any problems with light intensity or visibility.
View detail
Style is outstanding.
It is one of the options for those who want to make their MT-07 a round-eyed Spec.
Note that there are different types of Covers for different years.
Exclusive Design (same as XSR700) so it can be installed with Refreshing.
However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.
Also, the only way to adjust the optical axis is to use the screw to fix the body.
If you loosen it too much, the Body will rattle, so you'll have to tighten it up by adding a Rubber Washer or collar.
Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.
The Instruction Manual is entirely in German.
If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.
The style is outstanding, so please give it a try.
View detail
Small but bright.
Universal M8 Screw Size LED Blinker.
It contains a pair of Blinkers and a Heat Shrink Tube.
Jvb has a Harness for YAMAHA motorcycles on the market and you can install it without any care.
I processed it with Bullet terminal.
The structure is simple and I think it can be installed without any problem even if it is not YAMAHA.
Heat Shrink Tube is done with a heat gun, but I shrunk it by burning it with Burner of the CD can so that it may not become a direct fire.
It will be an LED Blinker, so the OEM Blinker relay will not work correctly.
An external LED compatible Relay is required.
I'm ↓ so it's working correctly.
https://www.webike.net/sd/24232608/
Relay is easy to replace.
Of course it is just fit for Fender Eliminator Kit of the same manufacturer.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
Meter Relocation
This is a recommendation for those who do not feel comfortable with the NORMAL meter position.
Sometimes it's hard to see the LCD in the light.
Helmet Shield. [Color] I could see no problem with Smoke.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
Required for Smartphone Mount
[How is it used?
This is a must-have Parts to attach the Smartphone Mount to the Handlebar Clamp.
The OEM has a Meter on top of the Handlebar Clamp, so the Meter needs to be relocated.
I can't install it no matter what I do.
Was the one you received as per Image?
It was as shown in the picture, but I had a problem to deal with the excess wiring of the Meter.
Fixed with Tie Wrap for now.
It also had a decorative plate to change the color to Stainless.
Was the installation difficult?
Simply remove the Meter and put it on.
However, please note that the Meter cannot be fixed if the screw of MeterBody becomes stupid.
How was your experience with it?
I'm a little concerned about the accelerator cable sticking, but I generally like it.
[Included Parts:were they on?
I was satisfied because it even included a decorative board.
[Was there anything that disappointed you?
There was a part that was not baked paint, so I painted it with Touch pan.
It's a Bolt hole, so it's basically invisible.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
It was better than I expected.
Once I got used to the OEMMeter position on the XSR700, I didn't have a problem with it, but I still think the general position and the same position as the XSR900 would be better … I think it's normal.
There are few documents and reviews, and only the video of foreign countries is there, and it is difficult to do the Right fist at the time of pulling out and inserting the key in the position of Offset, when the key is pulled out and put in and out, it is cheap with the Plate of BlackSteel & hellip; etc... I was anxious, but it was much better than what I thought.
Certainly the space is narrow at the time of key pulling out and inserting, but it is not painful, and it is a better feeling than the OEM position. However, it is thought that it is hard to install Smartphone Holder etc. near the HandlebarCenterMount. The BlackSteel plate is the only one shown in the product introduction image, but the Stainless Steel reverse side plate is included and it is good for the purpose. …Well, the stainless steel plate is much better, and the meter itself is easier to read than the OEM, as it should be. ……This is the normal way to go.
The installation is a simple one, but there is no problem in the handling of MeterWiring, Brake hose, and Accelerator Wire, although the space becomes a little narrow.
The triangle shaped Pipe Bracket, which is one of the most popular products in the market, hides the Aluminum Plate with a tuning fork mark, so this was the right choice.
View detail