Reviews
The length of the mounting screw of the key cap is not correct.
The mounting screw for the key cap was too long to fit, so it was shaved off and installed. View detail
Fits: YAMAHA MT-07, YAMAHA MT-07
What? I can't find a Number.
I bought it to do SCRAMBLERCustom.
Large satisfied with the super martial finish.
You will need to modify the harness, but there are tail and blinker harnesses for Yamaha that are sold separately, so you can buy them if you don't want to bother. I'm a bullet terminal craftsman, so I replaced it steadily.
The quality of the Lens and the amount of light is fine, but I think the color of the Wiring of the Tail lens is reversed. The Tail was always bright and didn't change when I stepped on the Brake, so I switched the Wiring and it worked correctly.
Well, this kind of thing is common in foreign parts, so you need to check it all the time.
The blinker is also LED Blinker from the same manufacturer.
So, here's the problem with Large.
No Number is attached.
The position of the holes is completely different.
An EU standard?
So it needs to be processed.
I bought Bracket and Bolt nut from Home center and installed them.
(Maybe this is the kind of thing I bought myself, it was iron in Black)
https://www.komeri.com/disp/CKmSfGoodsPageMain_001.jsp?GOODS_NO=41325&dispNo=001022007
If you raise the mounting position, the Blinker will be hidden, so be careful there too.
If you can't do this, buy a domestic kit that you can rely on.
View detail
Super cool with the Solo seat!
If you're going to put on the JvB Moto Solo seat, I'd say the Center cowl is a must.
There is no use for driving without it, but it will be put on if you think about Design because it will be skewed between Tank.
First of all, it is necessary to cut off the BodyTank Side Cowl.
It comes with a sheet of paper for cutting off the seal. Attach it as instructed in the Instruction Manual, and cut off the unnecessary parts.
I bought a cheap Leutor from Amazon and cut it carefully, no problem.
If you can't do the work around here, ask Shop to do it for you. The cutting surface is basically hidden by the center cowl, so you might be able to get away with a messy job.
And the actual connection to the Side cowl, the Instruction Manual says to drill a hole with a 3mmDrill and stop with the supplied Tapping!!!
I'm afraid of cracking the bottom hole. I'm afraid of cracks even if I drill a hole.
If I do not make this part easy to remove, when I remove the Side cowl, I always have to remove both Sides together, so I did not use Tapping, and because I had a Push rivet of appropriate size, I made the bottom hole a little large with Footpeg Drill to fit it, and connected 4 places. I connected it.
Because it is the one which is often used for the connection of Cowl originally, there is no problem in the vibration etc. Because the tapping of the attachment is Silver and stands out in my body color, it was GOOD that I changed it to the Rivet of Black in style.
Also, it is assumed to be Large, but Color:It is Unpainted. it is in the state of Gel coat of FRP.
I left it to the paint PRO to match the body perfectly.
Candy paint will cost you a fair amount of money, but I can gladly pay for this finish myself, as I don't have the time or skill to do it myself.
View detail
Anyway, it's hard. And thick.
The coolness comes first.
The Urethane is just so hard that it sits on your butt the worst.
It's thicker and has more width, so it's much less comfortable on your feet.
I was happy because this was my only option to make a JVB Custom.
It's definitely not a butt-ache product, so don't buy it if that's what you're after.
It would be great if you could improve the anchors yourself, or if you could just send them out for Seat replacement.
And Quantity of Luggage Rack and Tank centerCowlKit of the same Manufacturer:Please note that the Set is assumed to be Large.Instruction ManualGermany language, so use Google Translate or something.
View detail