Reviews
Imported goods are a matter of luck and self-responsibility
In my case, I asked the store owner from the beginning.
The Instruction Manual is only a diagram and the type and number of screws, and I am clueless as to which screw to use where.
To some extent, we will deduce this from the photos.
Luckily, there were no missing parts, but the screw holes were too tight and there was a possibility of cracking due to excessive load, so they widened the screw holes a little.
The quality of each item is different because it comes from a distant country.
It is almost a gamble, but it is not cheap, so think carefully before making a purchase.
I am very satisfied and happy with the appearance after the installation.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Complete Bolt On→2023 SV650ABS
I installed this after a 2023 SV650ABS, low Continental handle + Seat 3cm uncoated.
At first glance, I wondered if the position had changed slightly. I was worried about the effect of the change.
When I got on it, I was satisfied with the Large change because it became a very comfortable position.
Has the spec. of the product changed? No modifications at all as mentioned by others, the length of the Mounting Bolt was just right.... The length of the mounting bolt was just right... It is completely Bolt On.
Tube from Brake's Reserve tank (Hose) The "Rear brake hose" slightly interferes with the base of the rear brake hose, but this is not a problem because it is not a place where it moves or rubs.
The Plate is painted, but the Bolts that come with it are made of cheap iron, which is MinusPoint.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I wanted to use the OEMfootpeg as is.
Purchased and installed the OEM footpeg for the SV650X to make it lean forward a bit, not to say baxter, to match the Separate handle without changing it.
The slightly backward and slightly upward position of the handle makes it more compatible with the separate handle and reduces the tightness of the handle.
Knee grips are easier to get, which is a good thing, as the riding position is less likely to gap forward, which reduces buttock pain.
View detail
Looks Refreshing
I bought this to remove the Tandem Footpeg to fit the Single Seat.
It is recommended to use a shorter nut (20mm or 25mm) on the body side and a rubber on the silencer side to prevent vibration.
Also, the installation requires a little hang at the three screw stops.
If you tighten it while taking Balance, you can install it.
View detail
Love these clip ons
I love these clip ons, the bike feels so much better now, and looks amazing. I fitted mine with a cowl as well and everything fit together nicely, I couldn't have been happier with the way it all worked. The kit came with some braided steel line which I didn't need to use, not sure why its there, thats why I didn't give it 5 stars, without that line it could have been a little cheaper. View detail
Mmm.
If you don't like the Tandem grip with the carrier, this is a good choice, but the price is too high. I used a 40mm M8 bolt to attach the Plate to the Motorcycle, and used the included bolt (there is a long one and a short one, and I used the long one) to attach the Plate to the Grip, because the Plate's hole is cut with a screw. I used Nut and Spring washer (Washer is not included) to fix it. View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
feel well
You can get them much cheaper than Rear Sets and they are not that difficult to install.
You can't choose the position like Rear Sets, but it's a good position for me.
It is easy to ride.
View detail
Fits: SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750
Cool, but...
I can't read the instruction manual because it's in Spanish or Latin or anyway not English version (lol)
with I didn't do Bolt. Something like this?
It took me six months from the circumstances to install it after it arrived at hand, and I opened the package and noticed
I didn't contact Webike, partly because I was responsible for not checking immediately, and partly because the Bolt is available as a Universal Product.
I managed to figure out which Parts are attached by relying on Google Translate.
It looks so cool and the difficulty until then is good.
View detail
Z900 lower diversion
My car is Damao Kawasaki Z900 2021, and I bought the lower diversion product of Z900 on Webiike. The material of this product is glass fiber and gel coating. This lower diversion one is more attractive to install, and it is no longer empty under the streetcar. Second, I feel that I can protect my exhaust pipe and airflow guide. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is a 2021 Jeep Grand trade Kawasaki Z900, I bought a case of diversion of goods Z900 on Webiike. This product material is glass fibers and gel coating. The next diversion is mounted on a relatively nice music, it is no longer empty street car below. The second is to protect yourself feeling the exhaust pipe and the air flow diversion effect. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Performance as expected
As the predecessors have already said, the installation is basically on your own, but well, you don't have to worry about it that much.
However, it is necessary to transplant the Master Cylinder of Rear brake to the rear as well as this has already been written.
Probably because Brake Caliper was changed for the 2019 model year.
I used this one for the transplant. (Screw is my own)
KITACO (KITACO) Aluminum Bracket (Type 20-02/3mm thickness) Universal Black 529-0301023
I also prepared some of the footpeg screws myself. the OEM is a little short.
I think the cost was generally good, because Rear Sets are expensive.
View detail
Fits: SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750
Silencer Bracket
I bought it because of its simple design.
The SCORPION Exhaust System was used, but the position of the exhaust system was not correct, so a collar was placed between the bracket and silencer.
There are some bender marks on the product, but the production itself is solid, and if you think of it as an overseas RaceParts, it is a passable product. The position of the Gap is correct, so I think it is just the compatibility with the Silencer. The product is a Bracket Only and there is no bolt or color, so you need to prepare by yourself.
I am satisfied with the Design, but I feel the Gold price is high. (It's an average price for a Bracket). 。
It is aluminum, lightweight, and I like the color because it looks OEM.
View detail
Verify what happens when you buy 0 imprints!
I know it's sudden, but are you the type of person who reads Impressions before making a decision?
I always make sure to check it out and read through both the good and bad feedback to make sure I'm satisfied before I buy.
--but this time, I bought this [S2 Concept S2Concept Seat Cowl Color:GrayMNm3] I fell in love with it at first sight, and even though there were 0 impressions, I found myself completing the payment!
……Well, the quick story is? I've become a pillar of the foreign-made Parts! It's a kind of a thing.
I would like to write an Impression in order to be a reference for your future purchase.
[Mounting accuracy
First of all, it is the part that you are most concerned about, but it seems to be a manufacturer of France when I examined it.
I've had some painful experiences with Made in ItalyParts in the past……This one was no problem at all!
The Cowl Bracket hole position is perfect for installation!
Accuracy. I'm sorry. It was! (……It's possible that mine just happened to be good.
As for the installation work, I think that even a beginner doesn't have a problem because it only removes the hexagon.
By the way, I have an external Fender Eliminator Kit, so I'm not sure if it will fit on the OEMRear Fender…….
[Time until product arrival].
The order was placed on 11/27/2020 and the delivery time was 2 months because it was an ordered product.
It is also scheduled to ship from Webig on 1/28/2021. They're coming from overseas. We'll just have to wait and see. I thought it was a good idea, but it was actually delivered to me on 2020/12/18.
Despite the fact that this was a Corona disaster, it took about three weeks for it to arrive, which was a nice surprise! (Thanks Webig!)
[Design]
I bought this at first sight, so I don't need to rate it, but it's awesome!
As much as I love my Triumph THRUXTON Large, I think the XSR with a single seat cowl is an ironclad combination!
Quality and Texture
This is the reason why I gave it -1 star. [Paint unevenly] There was a …….
It's a Mad Spec. so this is slightly noticeable……but you have to get pretty close to see the Level, so it's probably not noticeable to anyone but the Owner.
if you are concerned about [Color Unpainting] I think it would be perfect if you could buy that one and have it painted at a sheet metal store to match the color, taking into account tanning, etc.!
So I've written this in quite a bit of detail, but in conclusion-- [Large happy with the purchase! It was!
It took a lot of courage because there were 0 Impressions and the Parts were not cheap, but I thought it would be nice to have this kind of adventure once in a while!
Also, 0 Impressions means that there are 0 people who have the same Parts ……but I think there are few people who have the same Parts.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
It needed some processing.
Installation requires drilling. Because of its flexibility, it is easy to install if you can locate the holes. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
Just right for the STREETFIGHTER type.
Originally it seems to be made for MT-09, but I used it for STREET TRIPLE because the position of the handlebar becomes lower and the width becomes narrower than the OEM handlebar.
However, since it's an international product, the price and delivery time are NECK.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I've learned to FIT my body.
I'm on an SV650X.
I was introduced to it because I am 178cm tall and have a rather large patterned body and the position was a bit cramped.
As a result, I feel that I am happy with the implementation.
As for the installation, it was installed without any difficulties.
However, as a result of the installation, I wanted to adjust the Handlebar side as well.
Tommaselli's adjustable handlebar has been introduced.
View detail
Stylish Crash Pad for a stylish Crash Pad.
I'm wearing it with the short Katanakit and it's quite my favorite part.
As far as installation goes, I think there was quite a bit of brute force involved.
However, the price is pretty nasty.
View detail
Fits: APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4
Quality made overseas. but this is how it should be.
I'm using it on my Aprilia RSV4FACTORYAPRC '14.
I'm looking for an external exterior for for Race and
There was one made by Magical racing, but I went with this one to compare on price.
It is made of Black Gel, but the screws are made of KevlarCarbon, which makes it very durable.
Please note that the screw holes are not open, so you will need to open them.
The part where the Upper Cowl and the Under Cowl are connected is made of Quick fastener (hexagon), so there is no need for drilling here.
There are no drainage holes that need to be opened either, the Blind can be off-the-shelf, or you can use the Home Center's water-related Blind.
You can use it by drilling a hole in the size that fits.
It's FRP in terms of material construction, but it's made in its own way because it's a painted base.
There are quite a few differences between Japan and other countries in this area.
However, since it is a painted base, it is better to buy it knowing that it is made in a certain way.
There are cracks in the gel and a thin portion of FRP, but I used it for a while as it is. There is no problem.
After painting it this time, I hope it turned out reasonably well. And so on.
The Seat Cowl comes with Seat, but this Base is also removable with a Quick fastener.
This is a very good build, and it is so good that I want the manufacturer of the FOR JAPAN MODEL to imitate it.
Unfortunately, my RSV4 is a 14 year old with a slightly different Spec.
The seat cowl was not suitable for my model year (the type with Bosch sensor), so I modified it slightly.
RSV4 has been around since 09-, but it is a Type without APRC, and APRC will start coming out in '11.
After 14 years from that point, it became a model change and RF and RR became a MODEL.
There are some minor changes in the APRC from 2011, such as different tank shapes, calipers and wheels, which are different from the first and second half of the APRC, so it is recommended that you look carefully before purchasing.
View detail
Fits: YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8
I'm generally satisfied
There is a little bit of laxity in the installation accuracy, but Silhouette has improved in Large The coloring is just right (^-^) The delivery time and the impact of Corona didn't seem to have much of an effect on me, so it arrived earlier than I expected? View detail
Fits: TRIUMPH STREET TRIPLE RS, TRIUMPH STREET TRIPLE RS, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE
As it is made in foreign countries, modification is a prerequisite even for compatible models
Motive for purchasing
STREET TRIPLERS for Race exteriors can be installed on FOR JAPAN Since it is not sold by MODELManufacturer, the choice is S2concept S2concept is the Exterior Manufacturer in France, and we will be the first to offer you the option of In addition to being used by many teams in overseas races, the topic of discussion in 2019 will be Custom made KATANA style SV650 base "Short Katana I am the Manufacturer who made the CowlKit of I decided to choose them this time because of their proven track record and technology
About the product
The best price for all these items!
[Contents] are Number Seal, Front Fender, Under Cowl, Seat Cowl, Seat cushion I think this price is a good cosmetic price Each is also sold as a Single Item, so if they are damaged, you can just buy some more It also helps to have
The shape is a good reproduction of OEM
I personally like the shape of the Number Seal, especially that it replicates the OEM Headlight The accuracy of the RAMAIR entrance is also perfect, as the OEM Duct can be used as is Not A special Decal to match this Cowl is also available for sale, which will be popular in WSB in the future I'm going to put up HeadlightDecal or something
Notes
You need to drill the holes yourself to install it
The included cowls do not have any holes in them Therefore, you need to drill the holes by yourself in order to install them You need to mark the holes with a mark to fit the actual car It's more reliable to put it on
By the way, in the case of STREET TRIPLERS, not only do they drill holes in the Cowl, but also Seat Cowl The seat frame needed to be modified for installation The process was to cut a screw on the seat frame to fix the cowl in place This is not only impossible to do without a special tool, but it is also impossible to repair the screw if it fails, so we have never tried it before If you don't have one, it's probably safe to ask the motorcycle shop for one
The side stand is not available
Under Cowl's Bracket cannot be installed without removing the Side Stand Therefore, you can use the slanting STAND to attach it to the Racing Stand or footpeg It is not possible to support the body of the car without it
View detail
OEM finish
I wasn't sure about the WirusWin, but I bought it because I liked the look of it and it looked like it would be stronger I'm happy with the OEM look of the result, I'll have to get the Bolt half the length of the OEM one It's not good and the price is high, so -1 star View detail