Reviews
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Complete Bolt On→2023 SV650ABS
I installed this after a 2023 SV650ABS, low Continental handle + Seat 3cm uncoated.
At first glance, I wondered if the position had changed slightly. I was worried about the effect of the change.
When I got on it, I was satisfied with the Large change because it became a very comfortable position.
Has the spec. of the product changed? No modifications at all as mentioned by others, the length of the Mounting Bolt was just right.... The length of the mounting bolt was just right... It is completely Bolt On.
Tube from Brake's Reserve tank (Hose) The "Rear brake hose" slightly interferes with the base of the rear brake hose, but this is not a problem because it is not a place where it moves or rubs.
The Plate is painted, but the Bolts that come with it are made of cheap iron, which is MinusPoint.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Feelings Rear Sets??
I think it makes it easier to get a good knee grip and reduces buttock pain Seat.
The footpeg has been moved back 3cm, making it easier to get a good footing.
Installation is very easy and I can do it myself.
Screw lock is in. The supplied Bolt is too short, so I used Screw lock without Washer.
I don't think I need OEMfootpeg either since it stopped at Screw lock without Washer.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I wanted to use the OEMfootpeg as is.
Purchased and installed the OEM footpeg for the SV650X to make it lean forward a bit, not to say baxter, to match the Separate handle without changing it.
The slightly backward and slightly upward position of the handle makes it more compatible with the separate handle and reduces the tightness of the handle.
Knee grips are easier to get, which is a good thing, as the riding position is less likely to gap forward, which reduces buttock pain.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Easy
I used it on my SV650X and the position is just right. The installation was easy and even an amateur can do it easily as it is just a matter of moving the OEM pedal without loosening it. (Only Shift rod needs to be removed)
However, in order to move the reserver tank of the rear brake as far back as the footpeg is lowered, a bracket of around 30mm sold at Home center is required. Also, I had to buy a new screw because the one that came with the brake was too short.
Although it is less expensive than the BagFootpeg Kit, I still wish it had at least a screw lock and a bracket for this price, so I give it this rating.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Rear Sets on Trial
I wanted Babyface's Rear Sets but the delivery date did not meet my expectations.
This is my first time to use Rear Sets, so I don't have anything to compare, but it is easier than the Normal position. Also, I think that the often mentioned pain in the ass Seat of SV650X has been alleviated just by changing the footpeg position.
If I have any complaints, it would be the high price and the lack of Position adjustment. It has become easier, but I would like to try various positions to see if this Position is really the correct Large one.
The work is easy with tools and a fair amount of knowledge. Screw locking locks are a must!
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I wish I'd bought it sooner
I was looking for Rear Sets, but I couldn't find anything that fit with the design and price, so I decided to go for it.
Frankly, I wish I had purchased it sooner.
I didn't feel any change in appearance or riding position, but I felt completely different fatigue after getting off the car. 。
As mentioned in other reviews, anyway, I had no problems except that the OEMfootpeg screws were hard and difficult to remove.
There is no Manual, but you can tell how to install it by looking at the shape.
I would like to RECOMMENDATION to those who ride 650X.
I'm very convinced of its functionality, but as a product, it's Gold genus Plate.
I would have given it 5 stars if I could have bought it for less than 10,000 yen.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
feel well
You can get them much cheaper than Rear Sets and they are not that difficult to install.
You can't choose the position like Rear Sets, but it's a good position for me.
It is easy to ride.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm gap between the Frame and the footpeg, but because the product is made from a single piece of wood with holes cut out, it is necessary to adjust the gap and install the product. After I removed the footpeg in order to install the product, I found out that there was a step difference, and I put two spring washers between the footpeg and the product on the upper Screw part, and between the Frame and the product on the lower Screw part. I sandwiched them and dealt with it. Because I adjusted the gap, the length of the screw of the attachment was not enough, and I used the screw of M8×30mm (although the tip of the screw does not come out to the end of Nut in 30mm). If you look at the shape of the parts, you can understand how to install it. It should be understood that it cannot be installed only by the product before installation (purchase?). But it is made by overseas manufacturer. I was satisfied. In addition, because the hose cannot reach the Master Cylinder Cup, it was necessary to move the installation position with Bracket, Screw, Nut, etc. View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm difference between the top and bottom of the footpeg screwed to the frame. It is necessary to adjust the gap between the frame and the product. After I removed the footpeg for installation, I noticed that the gap between the frame and the footpeg should be adjusted. I dealt with it by inserting two sheets of spring washer. In that case, because Screw (M8×25mm) of the attachment was short, I used M8×30mm (Note:The tip of Bolt does not come out from Nut in 30mm) and installed it. In addition, because the Hose does not reach the Master Cylinder Cup, it is necessary to change the position by Bracket, Screw, Nut, etc. separately.
You can see how to install the product by looking at the shape of the parts, but you should know before you start the work (or rather, before you buy the product?) that you cannot install the product by itself. I want you to understand before you start the work. But, it is made by overseas manufacturer.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Performance as expected
As the predecessors have already said, the installation is basically on your own, but well, you don't have to worry about it that much.
However, it is necessary to transplant the Master Cylinder of Rear brake to the rear as well as this has already been written.
Probably because Brake Caliper was changed for the 2019 model year.
I used this one for the transplant. (Screw is my own)
KITACO (KITACO) Aluminum Bracket (Type 20-02/3mm thickness) Universal Black 529-0301023
I also prepared some of the footpeg screws myself. the OEM is a little short.
I think the cost was generally good, because Rear Sets are expensive.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
It's cheaper than buying Rear Sets.
The same level of brake fluid reservoirs. (4cm) ZURAS
It is necessary to prepare Universal Bracket or something else because you need
Quantity:As a set item, it's a bit of a disappointment.
I had to change the Handlebar to something lower and farther than standard first.
This made me feel pretty comfortable.
And then there's the High seat? I painted the colors myself.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I've learned to FIT my body.
I'm on an SV650X.
I was introduced to it because I am 178cm tall and have a rather large patterned body and the position was a bit cramped.
As a result, I feel that I am happy with the implementation.
As for the installation, it was installed without any difficulties.
However, as a result of the installation, I wanted to adjust the Handlebar side as well.
Tommaselli's adjustable handlebar has been introduced.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I think it's functional enough
I have an SV650X I installed it to relieve the tightness I feel around my hip joints. parts themselves are just It's hard to tell which one is the other side of the iron plate of The handling of the brake hose is a little difficult It was not difficult to work in the degree I think that the crampedness was considerably reduced when I felt that I straddled it It's easy and effective enough However, if the cost performance is high for a simple iron plate and nearly 10,000 yen of gold, it will be Can't you say? View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
It doesn't fit the '19
Is the length of the Hose between the Brake master and the reservoir tank changing? The '19 will have a longer or installed hose that will not allow for the removal of the reservoir tank Bracket must be made longer View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
It's not badly made
The length of the Bolt is about 10? It is a pity, because Washer has a good one too View detail