Reviews
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Easy
I used it on my SV650X and the position is just right. The installation was easy and even an amateur can do it easily as it is just a matter of moving the OEM pedal without loosening it. (Only Shift rod needs to be removed)
However, in order to move the reserver tank of the rear brake as far back as the footpeg is lowered, a bracket of around 30mm sold at Home center is required. Also, I had to buy a new screw because the one that came with the brake was too short.
Although it is less expensive than the BagFootpeg Kit, I still wish it had at least a screw lock and a bracket for this price, so I give it this rating.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Rear Sets on Trial
I wanted Babyface's Rear Sets but the delivery date did not meet my expectations.
This is my first time to use Rear Sets, so I don't have anything to compare, but it is easier than the Normal position. Also, I think that the often mentioned pain in the ass Seat of SV650X has been alleviated just by changing the footpeg position.
If I have any complaints, it would be the high price and the lack of Position adjustment. It has become easier, but I would like to try various positions to see if this Position is really the correct Large one.
The work is easy with tools and a fair amount of knowledge. Screw locking locks are a must!
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm gap between the Frame and the footpeg, but because the product is made from a single piece of wood with holes cut out, it is necessary to adjust the gap and install the product. After I removed the footpeg in order to install the product, I found out that there was a step difference, and I put two spring washers between the footpeg and the product on the upper Screw part, and between the Frame and the product on the lower Screw part. I sandwiched them and dealt with it. Because I adjusted the gap, the length of the screw of the attachment was not enough, and I used the screw of M8×30mm (although the tip of the screw does not come out to the end of Nut in 30mm). If you look at the shape of the parts, you can understand how to install it. It should be understood that it cannot be installed only by the product before installation (purchase?). But it is made by overseas manufacturer. I was satisfied. In addition, because the hose cannot reach the Master Cylinder Cup, it was necessary to move the installation position with Bracket, Screw, Nut, etc. View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm difference between the top and bottom of the footpeg screwed to the frame. It is necessary to adjust the gap between the frame and the product. After I removed the footpeg for installation, I noticed that the gap between the frame and the footpeg should be adjusted. I dealt with it by inserting two sheets of spring washer. In that case, because Screw (M8×25mm) of the attachment was short, I used M8×30mm (Note:The tip of Bolt does not come out from Nut in 30mm) and installed it. In addition, because the Hose does not reach the Master Cylinder Cup, it is necessary to change the position by Bracket, Screw, Nut, etc. separately.
You can see how to install the product by looking at the shape of the parts, but you should know before you start the work (or rather, before you buy the product?) that you cannot install the product by itself. I want you to understand before you start the work. But, it is made by overseas manufacturer.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I think it's functional enough
I have an SV650X I installed it to relieve the tightness I feel around my hip joints. parts themselves are just It's hard to tell which one is the other side of the iron plate of The handling of the brake hose is a little difficult It was not difficult to work in the degree I think that the crampedness was considerably reduced when I felt that I straddled it It's easy and effective enough However, if the cost performance is high for a simple iron plate and nearly 10,000 yen of gold, it will be Can't you say? View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
It's not badly made
The length of the Bolt is about 10? It is a pity, because Washer has a good one too View detail