Reviews
Genuine BarkBusters Bar Mounts for MT07 2014
These were a purchase because the owner wanted some added protection from wind during long rides and these were a good addition as you can add larger shields. Finding the right part for this specific bike was not hard as I just searched fot the MT07 and filtered the parts needed. These are a little expensive but they are the 2 point fixing and therefore, will not just get knocked off at the slightest hit. Obviously, they do protect the hands and handle bars in case of an accident from being hurt. I did have a couple of other items in my basket and got them all sdhipped together to save a bit of shipping cost. My chosen courier was EMS Express and was delivered within a week of placing the order. The box these came on was well protected and no damage at all. The mounts come with the hardware attachments you need to add to the MT076 so you don't have to buy additional bolts etc. The finish of these is excellent, the paint is a satin black but very smooth and look great. The best part about these branded hand guards is you can add which ever shield you prefer. We already had the carbon ones and all fitted look really cool and a plus point is that they do protecrt. Very happy with the buy. Thanks Webike for the great job. View detail
BEST PUSH
very steady and good product seems like it will do its job perfectly looking forward to buy actual plastic cover for this View detail
Hand guard held only at Bar End, hands are not cold
Hand guard to be fixed inside the handlebar (Knuckle guard) This product is fixed at the Bar End, whereas most of the other products are fixed at the Bar End.
As for the performance of Lever protection in the event of a fall, it is fixed only at the Bar End, which is weaker than the two-point fixation.
But it is Firmly fixed and the feeling of putting it on is somewhat reassuring.
The design is streamlined and not bad, but I think it could have been a little more rugged for my taste.
The aluminum frame is thick and quite firm, and the plastic is also thick.
In the summer, this plastic portion may be removed.
View detail
Fits: DUCATI Scrambler Flat Track Pro, DUCATI Scrambler Full Throttle, DUCATI Scrambler 1100 Sport, DUCATI Scrambler 1100 Special, DUCATI Scrambler 1100, DUCATI Scrambler Desert Sled
Stable Burkbuster Hand guard
I had installed the Burkbuster on my water-cooled R1200GS before and had no problems at all even after many off-road tumbles, so I knew from experience that it was strong and reliable. View detail
Great Hand Protection for the Grom
About quality and texture: I am happy with the quality of VPS model hand guards, they are made from a high impact resistant plastic and are available in a extensive range of colours. About the feeling of use: They look great fitted to the offroad Grom and do a fantastic job protecting the hands from branches on trails while riding offroad and from the wind with the additional wind defectors at higher speeds on the road. Products to buy together: Some hand guard frames are a must to purchase along side the hand guard plastics to have somewhere solid to mount the plastics to and additional protection from the elements. Difficulty of installation: The process to install takes about quater of an hour, they simply screwed onto the hand guard frames. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a superior product with it's high impact resistant plastic from a brand that has been in the market for over 35 years as compared to the higher priced but weaker designed knuckle guards from Takegawa. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are in the market for hand protection then these are the ones to get. Aussie Made Aussie Tough. View detail
Very Solid Handguard Frames for the Grom
About quality and texture: I am happy with the quality of handguard frame, it is heat treated aluminium for added strength and impact protection. About the feeling of use: The full wrap around design is firmly secured by the two mounting points and makes the offroad Grom look tough. Products to buy together: Some handguard plastics are a must to purchase along side the handguard frames to finish the look and additional protection from the elements. Difficulty of installation: The process to install takes about three quaters of an hour, they are attached into the handle bar end and clamp around the handle bar. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a superior product with it's heat treated aluminium and full wrap around design from a brand that has been in the market for over 35 years as compared to the higher priced but weaker designed power bronze hand guards from Odax. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you will be installing these onto the Honda handle bars then you will have to make adjustments for how frame attached into the handle bar end due to the insert current fitted for the bar ends. View detail
There is a big difference between the two.
I introduced it in late autumn when I felt the coldness of my fingers.
This is an impression from a touring trip in severe winter with an outside temperature of 2 degrees Celsius.
I felt like an idiot on such a cold day, but
But still fun!
To put it bluntly, there is a clear difference between having it and not having it.
I was wondering how much the wind differs between the outside and inside of the Guard when cruising on the highway.
If you hold up your hand, you'll see that it's exactly windproof in Guard.
Winter Gloves equipped and Grip heater used.
As expected, the temperature was too low and my fingers got cold.
I felt very happy to have introduced it.
If you want more, you can use HandlebarWarmer or Grip warmer?
Different manufacturers say it differently.
I think the thing that wraps up the Grip and the hand entirely is a good idea.
Two-point and one-point fixation for better protection
I was worried about it a lot, but it wasn't like I was going to go on a very hard forest road.
I chose the One pointFixed Type, expecting only windproof effect.
I went with the STORM because I expected windproofing.
Do not rely on ratings for protection.
View detail
It's cool!
It was easy to install, just Large strange to remove the OEM Weight. I removed the Weight by referring to YouTube of people overseas. Anyway, it is hard work. View detail
Fits: BMW S1000XR, BMW R1200R, BMW R1200GS, BMW F850GS, BMW F750GS, BMW R1200GS Adventure
Robust Hand guard
I was looking for a Hand guard for my Megamoto and I found this brand.
The one I put on is a product exclusive to car models, but I changed the Handlebar at the same time, so some modification was needed.
This is a robust hand guard that seems to be made of a good material.
It's a MOTARD-style motorcycle, so it's a summertime look with the Guard.
View detail