Reviews
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000
I don't like Slider.
Recently, I had a fall on the Right Side and various things around the Engine were shaved off.
Starter cover, Crank cover, Right Side Under Cowl, and Exhaust System each received Damage.
I don't know how it would have broken if I had worn the Frame Slider, but it was simple. From the outermost object. It's going to be scraped off.
Exhaust system, footpeg, and bar end can be replaced by yourself, but not engine area and frame, so engine cover was selected.
To install, simply remove the target Bolt and replace it with the supplied Bolt.
The year of conformity is up to 18 years, but it also arrived at New Model.
It's the same with Engine.
View detail
Fits: HONDA CB1000R
For the Clutch cover.
Left SideCover looked new, but Right SideCover had scratches and scuff marks.
It looked like it had been used once, although I suspect it would have been scratched anyway.
A little disappointed! I thought the inspection needed to be done.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
Parenthesis OK
I think it's a good buy because it's inexpensive and you can tell the difference visually compared to other Manufacturer's products. The installation is easy and I have no complaints at all. View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA XSR900
For a little look custom.
I bought it with a little bit of custom only for looks.
But the colors are a bit confusing.
The "09" part stands out well.
Overall, I am satisfied.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000R, KAWASAKI NINJA1000 (Z1000SX)
Parenthesis OK
First of all, I love the way it looks, not too flashy, and it improves Parenthesis.
It is also likely to provide good protection in the event of a fall.
View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA XSR900
Exactly.
I bought it in Gold and it looks perfect. View detail
Fits: HONDA CBR650R, HONDA CBR650F, HONDA CB650R, HONDA CB650F
Not supported after 2021 MC
After the 2021 MC, the Right Side will be attached at one point, but the Left Side will not.
Has the shape changed slightly with the SlippersAssistClutch?
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
Fits: YAMAHA MT-07, YAMAHA XSR700
Installation instruction error
Product came very well packaged and looks good. When removing the bottom bolt for the generator side cover engine oil flowed out which can be expected to happen, be ready for this. Also the bolt removal indicated for the water pump is wrong as shown in the photo, the bottom left is a short bolt. You need to remove the bottom right one which is the long bolt. Realized this when I tried to screw in the bolt to the bottom left hole and this compressed the pump and coolant started to leak out. On the whole I am happy with the look and feel. View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
Reliable equipment
Compared to other products, it is easy to install, inexpensive and of good quality.
Removed insect carcasses, etc. during installation, repairing crushed fins, etc. as part of maintenance. It would be helpful to reduce these tasks in the future.
If the color of the product is Black and there is no problem in appearance, we recommend it.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
cost effective
It's cheaper than other companies and black is hard to find, so I chose this product. There is no problem with the installation accuracy. I didn't use Washer like the Cushion material that was enclosed. I didn't use Washer like the Cushion material that was enclosed. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000R, KAWASAKI NINJA1000 (Z1000SX)
Enjoy the fashionable changes of Protector
When I was looking for a Protection Cover for Engine Case, I found a RIDEA product that has a good look, texture and evaluation.
But unfortunately, there was no fit for the New Model Ninja1000SX, Orz.
Anyway, compared with the image of the side cowl of 2017MODEL, the Engine Cover looks impossible, but the Clutch cover looks good. I popped in like a kind of about-people pillar.
The product looks like it's made of reinforced fiber plastic and has a thicker wall, so it's quite rigid.
Because it is a Protector, it's more strength than stiffness, but I don't know if it's the only one I need to try. LOL!
The texture also looks a bit off in color in the attached image, but it is actually more black and looks good. The only thing that remains to be seen is how much the color will degrade under sunlight in the process of using it.
I wish it wouldn't turn completely white in about 3 years, though.
The installation is almost perfect and Smooth than I expected.
I think that the accuracy of the part is high because it is a part that cannot remove a large amount of clearance due to its nature.
The power of the recent made in Taiwan products can't be underestimated.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 To Racer
It makes you feel special.
The OEM also comes with an engine cover, but I installed it as a dress-up.
After all, if it's made by ThirdParty, it makes you feel special.
EngineQuantity in the OEM state:Pair (for Left and Right) It's very easy to install as all you have to do is remove the cover from the car and replace it with this one.
My one regret is that the surface is dull and uneven.
At first I thought it was plastic powder from the creation, but wiping it down with Parts cleaner didn't help.
The shape is good and I am happy with it.
View detail
Fits: HONDA CB1000R
Reasonably Guard
It was easy to install with the Bolts of Included Parts:as described.
It was recommended to be re-tightened after 100k miles, but after 300k miles, Wobble is not loose.
I'm concerned about the slight gap between the Engine and Cover.
It looks and feels like it's made of cheap plastic, but the body is so sturdy that it can be squeezed with both hands without distortion.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Versys 650, KAWASAKI ER-4N, KAWASAKI Ninja 650, KAWASAKI ER-6N, KAWASAKI ER-6F, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI Z800, HONDA GROM, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI 899Panigale, DUCATI 1199Panigale, DUCATI MONSTER1100EVO
I decided on strength and design!
OEM is plastic, so I thought that there was thermal deterioration and so I exchanged it.
It's a bit expensive as Parts. Parts for Wire lock, there are holes, but use of Circuit
Because it is not used as it is.
It is fashionable Parts of peace & Pinpoint because it is strong Aluminum Gold.
I am satisfied with beautiful Red.
View detail
Fits: YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900
Protect? Accent
As was the case with the other reviewers, you can install it with a single Wrench. I feel that making is also solid.. It was good to be able to choose the color. View detail
Fits: YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900
Cool!
Design is very cool.
Installation was also easy with a single Hexagonal Wrench.
Right part of the Radiator is somewhat gritty, but it is not a concern.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA MT03, YAMAHA MT03
Unexpected Large thing Radiator core guard
Fins of RadiatorCore are pretty crushed so easily that they collapse unnoticedly.
I think that SmallEngine Displacement Volume, this high speed Motorcycle is an important issue so much.
YZF-R25 / 03 common with MT-25 / 03 Unfortunately Core guard is not common because Shroud is attached.
I searched for quite dedicated items and tried installing the product of Liteya here.
It is easy to install
- Quantity attached to Core : Pair (for Left and Right) Remove 4 Bolt
Core → Shroud → Spacer → Core guard → Bolt
Just tighten in order.
Core itself is quite soft so you need to put Bolt straight and tighten it, it will easily blow holes, so be careful and work. Working time itself is about 10 minutes.
I am quite satisfied because the appearance is good and the coloring is also beautiful. I can not Guard everything, but I think whether it is better than nothing.
The only drawback is made overseas (Taiwan?) For me it will take time to arrive? In my case it took a month and a half.
View detail