Reviews
Fits: KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI NINJA400, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI VERSYS, KAWASAKI W800, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z750S, KAWASAKI ZRX400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr χ
Inaccurate information on the website
The information on the website say that it is suited for Ninja 400 13-21. I find it is unable to install to my Ninja 400 2020. I think the lever is for the old version of Ninja 400 but not suited for the new one. It is a little bit misleading. View detail
RIDEA stand hook
I want to know what I want to know.
I can't wait to see it, I can't wait, I can't wait to see it.
Webike bike bike bike.
I purchased this part because it made chain cleaning and bike maintenance easier.
The quality and weight of the product, as well as the perfect color, are very good.
We would like to thank Webike for packaging the item safely and neatly even though it was shipped far away. -------------------------------------------------- -------- This part was purchased for the convenience of chain cleaning and bike maintenance. The quality of the product, its weight, and the perfect color are all very good. We would like to thank Webike for packaging the item safely and neatly even when it was shipped over a long distance. I bought this part because it made it easier to clean the chain and maintain the bike. It's important to know how to prepare and feel the importance of weight. It's easy to move around and separate the parts. Powered by Google Translator
View detail
Fits: KAWASAKI ER-6F, KAWASAKI ER-4N, KAWASAKI Z250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100II, KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Versys 650, KAWASAKI Ninja 650R, KAWASAKI Ninja 650, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI ER-6N, KAWASAKI ZX-6R, KAWASAKI ZX-7R
Misleading product photo
The photo shows the connecting kit for a universal handlebar type, although the motorcycle fitment list showed only certain variants of Kawasakis. This led me to believe the listed Kawasaki models used a mounting method that would be compatible with universal handlebars, or that different connecting kit options would be available in the package. None are, and there are no other places to order a connecting kit for these bar ends other than some small shop in Taiwan. As a result these bar ends are now an incredibly expensive paper weight for me. View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail
Fits: SUZUKI address V125, SUZUKI address V125
Fire
It's look firee that's extinción how I imagine great service View detail
Fits: Others For Taper Handlebar (Φ28.6) with 41mm pitch mounting hole, SUZUKI GSX-S750
Texture is good.
The quality is good because of the high price!
I was torn between Black and Titanium, but the Titanium color gives the impression of being different, which is not bad!
I was able to pimp it on my S750 and it has just the right amount of HandlebarUp.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000
I don't like Slider.
Recently, I had a fall on the Right Side and various things around the Engine were shaved off.
Starter cover, Crank cover, Right Side Under Cowl, and Exhaust System each received Damage.
I don't know how it would have broken if I had worn the Frame Slider, but it was simple. From the outermost object. It's going to be scraped off.
Exhaust system, footpeg, and bar end can be replaced by yourself, but not engine area and frame, so engine cover was selected.
To install, simply remove the target Bolt and replace it with the supplied Bolt.
The year of conformity is up to 18 years, but it also arrived at New Model.
It's the same with Engine.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA STEED600, HONDA STEED400, HONDA SHADOW750, HONDA SHADOW600, HONDA SHADOW400, HONDA VTR250, HONDA VTR1000F FIRE STORM, HONDA VT750S, HONDA VT400S, HONDA VFR800, HONDA VFR750R, HONDA VFR400, HONDA RVF750, HONDA RVF400, HONDA NSR250
Lidea Brake lives
Purchased for Honda
A little expensive, but I'm satisfied with the color custom order.
View detail
It wasn't necessary.
Purchased to raise the rear wheel when cleaning the chain, etc., as there is only a side stand.
I attached it, but I only needed the L-Type Adapter that came with the Rear stand.
Well, it looks good, and I'll leave it on.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Stable handling
OEM, not equipped with Grab Bar, purchased to stabilize handling
Design:From a SS lover. I want it installed too!" I'm satisfied with the Large change.
Rigidity:Firm.
Feel:The handling has become more stable. Also, even when wearing winter gloves, the fingers can pass through with room to spare.
Work:Can be done by a beginner; be careful to drop the Nut, because if you drop the Nut, you will get a Rear all-Rose shi. If you are unsure, have a store install it for you.
Note:The gap is large at the OEM point, but it will be even larger. If you are concerned about it, you may want to address this issue.
View detail
Fits: HONDA CB1000R
For the Clutch cover.
Left SideCover looked new, but Right SideCover had scratches and scuff marks.
It looked like it had been used once, although I suspect it would have been scratched anyway.
A little disappointed! I thought the inspection needed to be done.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
No grooving required.
Complete 2FingerSpec., 125cc is sufficient for both with light input.
There is a groove cut on the lever part, but I would have preferred not to have it because it is not pleasant to the touch, and I sometimes grip it as if it were sliding.
Adjust is conveniently adjustable steplessly with Dial.
This product appears to be compatible with 20 years or earlier.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
Parenthesis OK
I think it's a good buy because it's inexpensive and you can tell the difference visually compared to other Manufacturer's products. The installation is easy and I have no complaints at all. View detail
Too much sticking out, unreliable and uncool.
I am sure we are mistaken, but the distance from the outside of the bottom edge of the rear suspension to the mounting collar of the rear stand is wide, and although I cannot explain it well in words, the diameter is thin and unreliable. View detail
Fits: HONDA CB250F, HONDA 400X, HONDA CBR400R, HONDA CBR600RR, HONDA CB650F, HONDA CBR650F, HONDA NC750S, HONDA NC750X, HONDA VFR800, HONDA VFR800F, HONDA CBR1000RR, HONDA CB1100, HONDA VFR1200F, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R (-2017), HONDA CB400F (2013-), HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250R (2011-), HONDA CBR250RR(2017-)
ride handlebar
Hello The pure handlebar is ugly I was looking for something beautiful Ridea Carbon Bar End has the best quality I installed it as soon as I got it It wasn't hard to install It's a two-stage system That's a good idea It's so beautiful Recommend. View detail
Hoho!
Installed over a month after purchase. LOL.
It's a cf4ma and I was able to install it with no problems!
The only drawback is the high price.
Momentum is a LARGE thing when it comes to potty mouths!
The resin cover attached to the Thailand coil at the end of the wire needs to be cut off. However, it would be better to remove the collar inserted on the lever side and insert the resin cover as it is.
?Don't forget to Grease up!
View detail
Fits: KAWASAKI ER-6F, KAWASAKI ER-4N, KAWASAKI Z250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100II, KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Versys 650, KAWASAKI Ninja 650R, KAWASAKI Ninja 650, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI ER-6N, KAWASAKI ZX-6R, KAWASAKI ZX-7R
sense of luxury
It is heavy enough and Carbon is cool.
The M8 bolt was included in the kit, but since my motorcycle is an M6, I was able to install it without any problems by changing the bolt.
View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA XSR900
For a little look custom.
I bought it with a little bit of custom only for looks.
But the colors are a bit confusing.
The "09" part stands out well.
Overall, I am satisfied.
View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
Quality is satisfactory
The quality is satisfactory, but it is a little thicker than the STAND of DAYTONA and did not go all the way to the back of the Hook. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000R, KAWASAKI NINJA1000 (Z1000SX)
Parenthesis OK
First of all, I love the way it looks, not too flashy, and it improves Parenthesis.
It is also likely to provide good protection in the event of a fall.
View detail