Reviews
Exclusive quintessential product
Type to remove and install Tandem grip.
The screw hole in the removed part is used for a tight fit.
It is stable and sturdy even with the Box installed.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Used with GSF1200HURRICANEHandlebar
Vibration on the Steering is reduced. 22.2, so a Smartphone Holder or USBCharger can also be attached. View detail
I removed it after all.
Personally, I felt more comfortable without it, so I removed it.
The product was easy to install and the texture is not bad. I think this is a matter of personal preference depending on one's physique, so I think it will fit those who can fit it.
It is a good product in that it is easy to customize, so if you are interested in it, you may want to give it a try.
View detail
Fits: HONDA FTR223, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, HONDA MONKEY
To eliminate tendonitis
[How is it used?
In Replace from VANVAN200 OEM. For elbow angle and other improvement purposes due to tendonitis. I tried European2 type before this, but it was too narrow and not high enough for me. I tried the European2 before, but it was too narrow and not high enough for me.
Was the one you received as per Image?
Chrome plating is clean and as expected.
Was the installation difficult?
Accuracy is good, no particular problems.
How was your experience with it?
VANVAN, but personally, I think it is important to have an Adventure type? w maneuverability and to be able to swing it around from the Front to some extent, but if it is too wide, it will be Minus in terms of tendonitis measures. So the best balance between the two was this for me:Handlebar width 740mm. The handlebar width is 740mm, and the handlebar height is 700mm, which is a difference of 20mm on the One Side.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it was too "Up" in terms of image and looked tacky, but I thought it was fine for VANVAN. If you are looking for practicality, I think it is the best.
As I mentioned in my review of another Handlebar Brace, I was having trouble finding the correct width for the HURRICANE Handlebar Brace that I installed at the same time. Since they are from the same manufacturer, it would be great if you could just list the typical brands that are compatible with the HURRICANE Handlebar Brace.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
Best for Europe4 type
[How is it used?
Installed on a HURRICANEEuropean4 type.
Was the one you received as per Image?
I think it is the usual HURRICANE quality. I like the honest, non-flamboyant design.
Was the installation difficult?
No problem.
How was your experience with it?
I installed it to prevent a large vibration of the entire handlebar, and it has eliminated the shaking of the entire handlebar, but instead, the grip now vibrates with a relatively large amplitude.
I'm changing the Grip to Pro grip so it's not unbearable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I would like to run around with the handlebar installed to see which is more comfortable, the vibration around the grips or the vibration of the whole handlebar.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I had a lot of trouble deciding which size to buy when I purchased the product. In the end, I measured the handlebar after it arrived and ordered the MSize based on my guess. The result was OK, but I think it would be helpful if you could list the Large or other compatible sizes for each handlebar model, even if it is only for the Made by HURRICANEHandlebar.
View detail
I put it on my GPZ400R.
I ordered a new Throttle Wire (pull) for GPZ400R D2. 2 days later, it arrived and I worked on it at night after work.
Don't remove the carburetor, just remove the Tank and Seat!
The work efficiency is not so good, but if you get the hang of it, you won't mind. I post maintenance records on social networking sites. (It's messy.) If you are interested, please look for it lol.
As for the feeling, I have driven about 600 km and so far there is nothing to worry about. The impression is that it is a little hard.
Price, quality, I wonder if this will be Base. I don't know about durability, but Large would be sturdy!
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA FTR223, HONDA NC700X, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
It's easy to drive around town as well as Touring.
Changed by adjusting Riding position
It depends on your preference, but I am much more comfortable and can handle Touring and city driving at all.
The OEM width and height are well within the vehicle inspection limit, although it is quite up.
According to the instruction manual, Wiring and wires can also be used for OEM applications.
(I don't know, mine is an extension from a previous Kit.)
Mine is a Quarter3 model, but the aperture angle and other factors vary from model to model, so please be sure to check the angle of the aperture.
However, there are no holes for the Switch box pouch, so drilling is required.
That's the only drawback.
View detail
It's a Recommendation, just in case!
I installed it because I am worried about theft if I install expensive PARTS.
The accuracy of the included Wrench is low, but the accuracy of the Screw is high.
If Wrench is lost during maintenance, another Quantity:I am afraid that I will need a Set.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA FTR223, HONDA NC700X, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
When a 168cm man becomes …
Handlebar width is just right.
OEMs had a wide range, and the Image of off-road motorcycle remained strong.
This HURRICANE POLICE 3 model is black in color and has an easy to ride position, and I think it is suitable for a woman of about 164cm.
For me, it was the best and fastest Mothers' bicycle sensation.
As you can see, the Style is a perfect on road motorcycle, and I am satisfied with the Large change.
View detail
Ideal Position?
Easy to install, even for beginners. View detail
Satisfactory Effects
Vibration was hard when touring long distances (laughs).
After installation, vibration was reduced by a LARGE amount!
I am satisfied
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100I, HONDA CB1100II, HONDA CB1100EX
Position has become so much easier!
Although the change in position is only slightly more than NORMAL, the effect is immensely LARGE.
In my case, the Normal position did not feel comfortable, and after driving for more than one hour, my arms were tired and I was concerned about stiff shoulders. However, I also changed the seat together with the Normal position, and I assume that the Seat height is slightly higher than the Normal position because the Cushion is higher.
The price is high, but considering the functionality, I wish I had done it sooner.
View detail
I was curious.
Hard to tell from the product image.
But is it surprisingly angular?
Hmmm...maybe too subtle.
We will see how it goes for a while.
View detail
Condor Handle
[How is it used?
Good
Was the one you received as per Image?
Street Image
How was your experience with it?
The system is a little tight.
[Points to note]
nothing special
How did it compare to other products?
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F
Don't buy MC41
Blinker cannot be fixed.
Normal fender not to move up and down.
Mounting holes for fixation are Small size?
This product is
The car is not designed to look up or down after driving.
Needs to be corrected. 。 The blinker side is a rubber mount, so it cannot be completely fixed.
We recommend that you buy one from a different Manufacturer.
View detail
It is a reliable HURRICANEBrand with a robust construction.
This product is a trusted HURRICANEBrand and the construction is solid, and there was no sign of cracking even when tightened tightly with Bolt! View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
HURRICANEHandlebar Holder Spacer T10
I wanted to make the handlebar a little higher, and after much consideration, I found one that could be attached to the STD Handlebar Post and installed it.
I have not done a long distance test drive but would like to do so in the future. We recommend that the tank be removed for installation and that two people work on the tank (the tank may be damaged). (The tank may be damaged.)
View detail
Can be installed on W800 2022 MODEL.
After much hesitation, we chose HURRICANE's Pillion Bar because of its low price. As a result, we were able to install the bar without any problems, and we are satisfied with the improved style that can be used for attaching a side bag, etc.
One drawback was the hassle of removing the OEM Grab Bar, but I am glad that it can be used with Bolt On as it is.
View detail
It arrived when I forgot about it.
I don't remember when I bought the W.
I thought it was some kind of mistake.
I checked and they said they ordered it about a year ago…w
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
Parenthesis good?
I placed an order last August and finally received it at the end of March this year.
There are many different shapes of Pillion Bar available from several companies, but I liked HURRICANE's bar at first sight and waited for half a year. The installation was a bit time consuming, but even an amateur like me was able to complete it. 1 Minus is that the Instruction Manual is in WhiteBlack, so it is difficult to understand. I rarely ride in the back, but with the whole Silhouette, this is a must have.
View detail