Reviews
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100I, HONDA CB1100II, HONDA CB1100EX
’19CB1100EX Unable to fit...
It was listed as compatible with CB1100EX up to 16 years old.
I tried to install it on my '19 CB1100EX just to see what it would do.
The holes in the Meter Bracket (HondaOEM Product version:37120-MGC-JB1) that will be co-tightened are
OEMHolder's M8 diameter does not pass through this Holder's BoltM10.
Declined to apply...
I suppose it would be possible to widen the hole with a reamer.
We have decided not to do so for the time being.
So bad
View detail
too bad
I was informed that it can be installed with a genuine cable, but for a smooth installation, a 10cm longer clutch and decompression cable is required. View detail
Previous Motorcycle takeover.
I am posting this although it is not a new purchase. It is a take over from my previous Motorcycle Pipe hanger. I installed it on my Pipe hanger again, but I'm not sure how well it works. The first time I saw it, I thought it was a good idea to use it. I feel a little less fatigued when I go out for a long distance.
Also, long distance on highways, etc. may be different, but for touring of 100 km or so? The reason is that the number of the
Considering the weight of the OEM Bar End, I think there is a need for Weight?
View detail
Repair item for Set Back Holder?
I bought this thinking it was a Spacer for the Bolt of Set Back Holder, but the diameter didn't match and it didn't fit. View detail
You can't load heavy objects.
Installation is easy as it attaches to the top of the Pillion Bar.
Webig's product description says to remove the Pillion Bar, but it's wrong!
The official website also says to put it on top of the bar.
The mounting part is not very strong, so it wobbled when I put the top case on.
OEM Carrier is recommended if you want to load heavy items.
View detail
Nice try, really nice try……
I bought it to keep my stem area tidy, but it may interfere with some models of sports cars with cowls.
I thought it would be very easy to use for bar handle types like StoFire and NAKED.
Since the Reverse side Nut&Washer is Silver, I bought the Black color separately.
View detail
Interference with Down fender
I wanted to Refreshing Fork Guard.
I've installed it.
Down fender made by OVER.
Bracket interfered with …
I was able to install it, so we'll see how it goes for a while…
Be careful if you are using Down fender.
Well, there's no such thing as compatibility between parts.
I'll have to buy it to find out.
I like the look of it.
View detail
something easy to do, e.g. to cover up a loose article
I purchased this to hide the deterioration of the Cap portion of the Top portion of the Fork.
Just Material:Since it is a RubberCap, it seems like it should be a little cheaper.
It does not seem to be loose enough to come off.
View detail
Fits: KAWASAKI ZX-10, KAWASAKI GPZ750R, KAWASAKI GPZ400S, KAWASAKI GPZ1100, KAWASAKI GPZ1000RX, KAWASAKI GPX750R, KAWASAKI GPX400R, KAWASAKI FX400R, KAWASAKI ZZR1100/ZX-11, KAWASAKI GPX250/R/R2, KAWASAKI GPX250/R/R2, KAWASAKI GPZ400R, KAWASAKI GPZ600R, KAWASAKI GPZ900R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR250, KAWASAKI ZZR400
At one time, Bar handle
[How is it used?
Used for Bar handle.
Definitely less vibration than the Separate handle.
I don't think Handling stiffness has been reduced either.
Iron Handlebar is recommended over Aluminum Handlebar.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Satisfied
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
HURRICANE is famous for its Handlebar system.
View detail
Doesn't JC91 fit the bill?
? The hammering on the car body is bad.
It is better to widen the mounting hole Pitch of Number base part.
Or, widen the hole in the Bracket part of the car body mounting
If there is no protrusion in the Inner cowl part, I think it will be attached normally.
I'm going to use a color boss to attach the bracket.
I felt the thickness was too thin.
Since Bracket and Cowl are directly against each other, I thought the thickness of the attached collar could be doubled.
? Price is cheap!!!
I like the design of the Fender Eliminator itself.
I especially like the length that comes out the rear of the vehicle, which is just right.
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA HORNET600, HONDA HORNET250, HONDA ZOOMERX, HONDA JADE, HONDA glom, HONDA glom, HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR TypeLD, HONDA VFR800, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA GB250 CLUBMAN
One point
I bought this for One point of the Stem section.
The color is bright and beautiful, but is it shallow in the depth direction?
When I installed it, I couldn't tighten it to the end and it was fixed as if it was floating.
View detail
yzf-r1 1999 for the wife
It's a shame that the Top Bridge doesn't fit perfectly, so I had to cut it down a bit;
Lever, or MASTER pulling, or a little bit of interference…
Position seems to have gotten a lot easier.
View detail
It's good, but it needs improvement.
This is a report on the Z900RS.
The texture is refreshing and good.
The hole to pass the wiring of the Blinker and License Plate Light is large, and water enters under the seat when driving in the rain, and ETCBody etc. become dirty.
View detail
Well, the product was exactly as I imagined.
I bought this to hide the rust on the ForkHead when I changed to a Bar handle.
To put it crudely, Material:It's a Rubber lid, so I'm really hoping it will be cheaper.
It is simply a method of inserting it from the top, but there is a moderate resistance, and it is not likely to be pulled out while driving.
View detail
WeBig side wrong product exchange support
I received a Handlebar for a different model and tried to exchange it, but it kept giving me errors, and there was no phone support, so I had no choice but to post an Impression with a rating of 1, and Customer Service contacted me by email.
They wouldn't give me the name or phone number of the person in charge, so I just kept emailing Yari Bird and they managed to replace it with the Handlebar I ordered.
I give it a rating of 3 because the products they offer are the largest in the industry, but the after service is not very good.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100I, HONDA CB1100II, HONDA CB1100EX
I feel like Position is getting easier by the minute (lol).
Fitted to a 2018 CB1300SB SP.
To be honest, I wanted to buy Handlebar Up Type, but I gave up because Grip heater was equipped as standard.
Therefore, I bought this one which does not need to be replaced around Grip and Cable.
It is the impression that I put it on, but I think that Handlebar came to the front to a pleasant degree.
Manufacturer announcement also says 20mmBack10mmUp compared to NORMAL, so it's probably like this.
The installation can be done by amateurs as long as they have the tools.
However, if I wanted to, I would at least like an Instruction Manual.
It may be a hassle, but make sure you have a good background to Tank and Inner Tubeetc.
Not only this, but a service manual would be even better for maintenance.
I'm satisfied with the product itself, but I don't think it's cosmetic.
I don't recommend it because I'm not sure if I can even feel the positioning effect.
If you don't have a reason for Grip heateretc. like me, you should be safe and go for Up Handlebar Kit.
View detail
It's just a plastic Cap.
It's just a plastic cap, like the title says.
It is probably the same model as the one included in the HURRICANE Pipe Handlebar KIT in Black.
This time I used it on a Bolt that was dyed black on Stainless Steel, but it was too tight!
I accidentally got a Wound on the butt of a Penetrating Minus.
View detail
So bad
I bought this because I thought it was unusual to have a screw cut directly on the weight part, not Pierced Type.
I was planning to use it with the Bar end mirror end, but the screw hole for this product is 4mm.
Because the screw of the bar end type is 6mm large, it is necessary to process small.
View detail
We can improve the quality accuracy.
As mentioned in the other review, as of June 2021, the M6 thread system of the included Change rod is still not working and neither the forward nor reverse threaded side will go into the mating nut.
The same defect is mentioned in a Review from a few years ago on another ShoppingSite. When will this be remedied? ….
I'm not sure if it was purchased a long time ago because it was a product that We-Big had in stock, but We-Big should also check the reviews regularly for popular products and products in stock and tell the manufacturer to improve if there are a few obvious problems. I'm not sure what to make of it, but I'm sure it's a good idea.
I'm an ex-mechanic and I'm in the business of machining gold, so I used a Dice and installed it with no problem, but I'm pretty sure you can't find a reverse threaded Dice at your local home center… or why don't you guys deal with it yourself and return it? It's not a cheap product from an unknown manufacturer, it's a famous FOR JAPAN MODEL long established manufacturer. It is strange that it seems to be the norm to deal with it yourself.
When I installed the XSR700, I was able to lower my foot only on the back side of the footpeg, but now I can lower my foot on both sides of the footpeg. I'm not sure if it's a good idea, but I think it's a good idea. I'm not sure if this is a good thing or not.
I think the product itself is satisfactory as long as it is produced and inspected properly.
Please improve it as soon as possible. It's a shame for a well-established manufacturer that the screws don't fit.
View detail
Forgive me for the large change.
It's HURRICANE, not KITACO, sorry for the Large? View detail