Reviews
Exclusive products are still good
I had been using Universal Product's triangular side bag support, but it could not support the bag I had installed and the bag made contact with the Tire, creating a hole, so I had to install a larger one.
I did not want to spend a lot of time to select one of the many Universal Products, only to regret it when I tried to install it and had to choose a different one. I have already forgotten how many times in my life I have lost money by buying cheap products.
The large size is necessary and sufficient, and it does not change the appearance of the cool XSR700. The strength is also perfect.
My car is mat color, so I sprayed Primer surfacer and painted it matte black.
I'm satisfied
View detail
Fits: KAWASAKI VULCAN DRIFTER400, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400
Installed on my son's Motorcycle
I installed this on my son's Motorcycle. It took about an hour of joint work, but we were able to install it while having fun. The ride height was lowered and the balance is good, making it even better looking. View detail
BALIUS2Pillion Bar
Installation was easy and looks great!
However, the Seat is difficult to close and the Seat interferes with the Bracket of the Pillion Bar, causing the Seat to tear.
View detail
It was cool!
So much so that I can only ride on sunny days.
Mud splatter will be worse, but w
Installation is also easy after reading the instructions.
View detail
Looks better than stock
Does the job on my JB03 Monkey125. Lighter, more compact and better looking than stock Honda one. There are better looking ones available now, but this model was the cheapest at the time I bought it. View detail
Reliable external manufacturer's product
2022 Rebel 250 (MC49) I bought this for my Robot Handlebar. The size of the Thailand Ko is also Exactly, so it was easy to exchange.
In terms of length, I think 150mm Long is sufficient unless the Up Handle is very large.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF
Jet speed delivery+ cool
Fast delivery and good quality... The clutch cable fit my cb 400 vtec perfectly.. Very easy to install.and good quality. View detail
NORMAL is not possible.
The width and height of the OEM is impossible.
In city traffic, you'll probably hit a car one day with a piece of shavings.
Together with Short mirror, the width of the car is drastically reduced.
I have to change the structure for inspection, but I don't intend to change it back to NORMAL.
This Handlebar is NORMAL and good for hanging.
Kawasaki can make it an Option at the time of sale, and you can get the car's inspection certificate.
No width change would be necessary.
Why do you choose the Tono Position, even if it is Meguro?
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
Perfect hole drilling
[How is it used?
Used to drill switch box preparation holes in universal handles
phi& phi;5mm.
Was the one you received as per Image?
Fairly solid construction
How was your experience with it?
The hole was drilled perfectly in the desired position.
[Points to note]
High prices….
It's not something I use that often ….
How did it compare to other products?
Unknown, never used another company's.
Some other companies' products are a little cheaper,
Is there any difference as far as performance…?
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09
8BL-RN80J Installed on XSR900
Installed on current model 8BL-RN80J XSR900
Drilling of the Switch box is necessary, but
The installation itself can be done.
Wiring Brake hose was able to be attached without modification.
please refer
View detail
Bar End with Weight spliced in and vehicle is ready for inspection.
I added Weight to the Bar End and the car passed inspection.
It has a more compact position than the Pipe Handlebar,
There is no discrepancy.
Combined with Weight, vibration is reduced, though,
I feel vibration only when cruising at 90-100 km/h, probably due to the characteristics of the Motorcycle.
Below 80 and above 110 are quite comfortable.
I asked the Shop to replace it, but since I was changing the MASTER of the Brake, they had a hard time avoiding interference with the Shield and charged me an additional fee of Gold.
View detail
Expected
Length can be adjusted in combination with Weight. Car inspection OK. View detail
It is a must for Continental handle.
When I exchanged the z900rs23 model with the HURRICANE Conti2 type, the Clutch Cable was long and it was a bit of a poor parenthesis because of the Dollar. I removed the cable from the engine side, and then removed the clutch side. I wrapped this product around the OEM Cable with Vinyl Tape and pulled it from the Engine side. I was a little disappointed, but the Cable also passed under the tank without any problem. I had a little trouble installing the cable on the engine side, but I managed to do it. The length is almost the same as OEM. View detail
HURRICANE Condor Separate handle
Good Design! Normal wire has a limited setting width! View detail
Fits: YAMAHA SR500, KAWASAKI ZEPHYR750 RS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ
HURRICANE Visor for SR400
The service is really good. The staff made sure that my order arrives in perfect condition. The box is sturdy and there are a lot of bubble wraps. As for the product, the quality is great and reliable. Easy to install even with the japanese manual. I would happily recommend this shop to my friends. View detail
Concealed hole in front fork
[How is it used?
Touring, city driving
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
There is none
View detail
It wasn't easy.
I bought it because I needed to change the handlebar.
I used WeBig because I was certain that no local Motorcycle parts store would be able to sell the parts I needed.
I think it is unnecessary for those who can do the processing themselves, but for amateurs, it was a very helpful part.
View detail
Fits: YAMAHA XJR400R, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, HONDA APE 50, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400
Effective for position change
The handlebar position is now closer to the front, which makes it much easier to ride.
For those who install it by themselves, you must be able to drill a hole in a round bar in the correct position.
Previously, the mounting position was changed by clogs, but this is no longer necessary.
I was disappointed that the Black paint peels off easily.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB150R
Easier.
The delivery date was extended several times, and when I thought it was going to be delivered in September, it was suddenly shipped in April.
When replacing the handle position, it was difficult to determine the position I liked best, but in the end, I was able to determine the quantity by feeling.:Set
Once the Spacer has been split into upper and lower sections and the heights are aligned, the Quantity:Pair (for Left and Right) is Gap and Quantity:Pair (for Left and Right) The Spacer is repeatedly dropped out in the process of setting the Handlebar Set.
View detail
I think it's a passing grade.
I think it would be easier if two people work together to install it on the car body. 30-liter GIVI was installed, but the bracket did not fit and the installation could not be done reliably. View detail