Reviews
He wanted to use use by a tandem for fixation of not the purpose but a seat bag, or a net, and it purchased. Since the sheet of a bandit was smallish, it was in the state which there is no interference of a seat bag fixing belt, and moves to right and
He wanted to use use by a tandem for fixation of not the purpose but a seat bag, or a net, and it purchased.
Since the sheet of a bandit was smallish, it was in the state which there is no interference of a seat bag fixing belt, and moves to right and left, but after attachment of a tandem grip could be fixed firmly.
Since the crevice between it and a seat cowl was small about use of a touring net, it was hard to attach the hook made from a plastic, and only the type coated to metal has used it.
Since only the seat bag is attached usually well, it is pleasing enough.
Since use by an original tandem has not been carried out yet, it is an unknown there.
View detail
Since a side bag was attached to ST250, it was used. In the exactly good size, construction material was good.
Since a side bag was attached to ST250, it was used.
In the exactly good size, construction material was good.
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI W400, KAWASAKI 250TR
When equipping ZRX400, since evaluation of the spacer which can do Posh in an up & back was delicate, it purchased here. Although steering nature does not have a big change, appearance changes very well. Unreasonableness is not felt for management
When equipping ZRX400, since evaluation of the spacer which can do Posh in an up & back was delicate, it purchased here.
Although steering nature does not have a big change, appearance changes very well.
Unreasonableness is not felt for management, even if cables are reasonable and it turns a wheel thoroughly.
Without knowing why, since the product of Posh has in play that a cable was not able to attach in normal, the uneasier one recommends you here.
View detail
Attachment is easy. Texture is also very best. There is no appearance sense of incongruity. Is a degree of comfort touch called the mere kana which became somewhat easy?
Attachment is easy.
Texture is also very best.
There is no appearance sense of incongruity.
Is a degree of comfort touch called the mere kana which became somewhat easy?
View detail
Fits: HONDA GB250 CLUBMAN, HONDA CL400, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SS
For that the day of a wind also continues turning also around a rainy day, and 16 years The meter cable which has continued simple work also had the mileage of 96,000 km, and it finished the whole life. A new cable will be attached by saying. The
For that the day of a wind also continues turning also around a rainy day, and 16 years The meter cable which has continued simple work also had the mileage of 96,000 km, and it finished the whole life.
A new cable will be attached by saying.
The outer of a stainless mesh is cool! About the price, although I felt that it was somewhat high, when there was ? inner cable simple substance sale, I thought that it was good.
View detail
With separate-handle-izing, it attached together with the grip. Since the inside of a handle was not a cave, the bolt and the rubber were cut about 10 mm and attached. Since the bolt is a cross recess, I carry out [ the mind appropriate for Yasu f
With separate-handle-izing, it attached together with the grip.
Since the inside of a handle was not a cave, the bolt and the rubber were cut about 10 mm and attached.
Since the bolt is a cross recess, I carry out [ the mind appropriate for Yasu for a while ], but I think that cost performance is good.
View detail
In exchanging a handle for a chopper type, even when it was pure, the kana which arrives somehow was thought, but it did not arrive too but was purchased. Although it was uneasy whether it is that the rubber boot which two cables are running along is
In exchanging a handle for a chopper type, even when it was pure, the kana which arrives somehow was thought, but it did not arrive too but was purchased.
Although it was uneasy whether it is that the rubber boot which two cables are running along is attached, it was attached exactly.
Although it is a little different in the form of the rubber boot being pure, since it is the form mostly, the portion inserted in an axel cable holder can be inserted as it is.
Although based also on distance, I think that it is needed when a grip part exchanges for the handle which becomes a pure higher location, and a wide thing.
View detail
Since 250TR was used as the chopper, it exchanged. It is a very ordinary clutch cable which does not change at all that it is pure. An operation and application force are very pure. Without removing a tank in TR, the hind bolt was removed, and
Since 250TR was used as the chopper, it exchanged.
It is a very ordinary clutch cable which does not change at all that it is pure.
An operation and application force are very pure.
Without removing a tank in TR, the hind bolt was removed, and where a little tank is lifted, exchange was completed.
the time of die length turning a wheel to the limit of left-hand side -- ? 30 more about -- kana needed.
It is the die length to the extent that it said.
On the contrary, I think that it is exactly good die length if it is a handle of the die length like a photograph since it will pass not much when a handle is made straight if too long.
View detail
It is needed for equipping with a sissy bar. Since it can equip by bolt on, it is very easy. However, if you notice whether several are lost that the screw of junction with Bar loosens very easily during a run, it is loosening. better -- a bun
It is needed for equipping with a sissy bar.
Since it can equip by bolt on, it is very easy.
However, if you notice whether several are lost that the screw of junction with Bar loosens very easily during a run, it is loosening.
better -- a bundle is required.
If it repairs firmly, the rust of details will also end few.
View detail
Since a pure twist is also made into its favorite position, this separate handle is used. Although the end cap is made into plastic specification, it is easy to fall as a problem. It will become difficult to fall if a vinyl tape is also rolled and
Since a pure twist is also made into its favorite position, this separate handle is used.
Although the end cap is made into plastic specification, it is easy to fall as a problem.
It will become difficult to fall if a vinyl tape is also rolled and attached.
Since it is not too bad, it is a three stars.
View detail
In consideration of the bulb gone, it purchased to the stock. Although he noticed after purchase, since I was a clear lens, I was an orange bulb. Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an or
In consideration of the bulb gone, it purchased to the stock.
Although he noticed after purchase, since I was a clear lens, I was an orange bulb.
Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an orange, coloring thinly.
The direction to purchase needs to be warned not only about wattage but about this point.
Foundations Orange lens => Clear bulb Clear lens => Orange bulb Peevish!!
View detail
This stay was purchased with a 50-cm sissy bar. However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
This stay was purchased with a 50-cm sissy bar.
However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
Furthermore, I was sorry for weld to already have rust a little.
However, since appearance is quite satisfactory, it is three stars.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA FTR223
Although this form was pleasing and purchased, On my motorcycle (v-max), bolt-on is improper (it purchased with nothing to lose, getting to know somehow ...)! If a spacer is not used, axel wire, A switch box etc. contact a body (tear). Although th
Although this form was pleasing and purchased,
On my motorcycle (v-max), bolt-on is improper (it purchased with nothing to lose, getting to know somehow ...)! If a spacer is not used, axel wire,
A switch box etc. contact a body (tear). Although the spacer is sold only to v-max, the mind which he buys with a large sum (3 times of the price of the handle itself) does not set.
Since the truly added admiration came out of them although the handle O PPUSU pacer and Bar O IZUKITTO of a certain company were handy (prices of these about 1~2 handles), it decided to make a spacer on one's own.
of course -- being aluminum shaving and coming out -- !, of course, it has not completed yet (tear)! With a concept, if it rises 15 mm perpendicularly, I will think that it is enough.
If it completes, it will rise on my motorcycle.
View detail
Even if it uses wearing not only as being extended by appearance but as a grip part which becomes like a picture, a satisfactory situation, a totter, etc. think that it is not and if it is likely to seem ? if ineffective since it is 2.5 cm, but operativit
Even if it uses wearing not only as being extended by appearance but as a grip part which becomes like a picture, a satisfactory situation, a totter, etc. think that it is not and if it is likely to seem ? if ineffective since it is 2.5 cm, but operativity becomes good so that it is unexpected.
It uses for various vehicle types according to ideas.
View detail