Reviews
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR250, HONDA NSR250R, SUZUKI GSX1400, SUZUKI SV1000S, HONDA 400X, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB250F, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400SF, HONDA CB400SF
SUZUKI GSX1400 was equipped. Direction of a return spring was puzzled just for a moment at the time of wearing. Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a
SUZUKI GSX1400 was equipped.
Direction of a return spring was puzzled just for a moment at the time of wearing.
Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a spring well.
However, even if it does not enter, since maintenance is possible, it is satisfactory at all on actual use.
Attachment was completed in about 10 minutes.
Although the step of silver was attached, it is glossy and appearance is racy perfectly.
If it actually rides, a notch grips in shoes, and does not slide even on a rainy day, but is comfortable.
With the thing without a bank sensor, since the angle of bank slit upwards aslant, it became deeper than normal.
Instead, since the overall length of a step is slightly short, the shoes point grounds with THE.
It is large satisfaction synthetically.
However, it is an one star minus regarding direction of a spring.
View detail
This stay was purchased with a 50-cm sissy bar. However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
This stay was purchased with a 50-cm sissy bar.
However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
Furthermore, I was sorry for weld to already have rust a little.
However, since appearance is quite satisfactory, it is three stars.
View detail
Having equipped with the blinker kit of a four-piece set, it falls. One blinker is damaged. rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind. Kana whi
Having equipped with the blinker kit of a four-piece set, it falls.
One blinker is damaged.
rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind.
Kana which can be used when (?) fall is carried out next time although it is excessive one piece since it is a two-piece set.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
It attached to HONDA CB400SB'09. Although it was in description of item even with '08, it has equipped satisfactorily. OK is glad for cables to come out as it is. Although attachment was easy, 10 mm of 6 angle wrench is required for it. Wh
It attached to HONDA CB400SB'09.
Although it was in description of item even with '08, it has equipped satisfactorily.
OK is glad for cables to come out as it is.
Although attachment was easy, 10 mm of 6 angle wrench is required for it.
When it straddles instantly and a handle is grabbed, it is very much good touch.
If normal, there was trunk touch that the waist became painful for a while for anteversion, and power was tired of going into an arm, but the position after wearing became very easy.
When it is this, long-distance touring is also OK!! Going out is pleasure.
View detail
It attached and was overly easy. When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory. Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
It attached and was overly easy.
When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory.
Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
View detail
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank. However, it will be set to the hardly worried level if it attaches to the location lowe
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank.
However, it will be set to the hardly worried level if it attaches to the location lowered for a while.
It became quite easy when compared with the normal handle also in the state.
Also when running a peak, do I feel that it becomes easy to run compared with normal?
I think that this hit is based on how to ride (^_^; I hear that attachment requires a hang just for a moment, and they are four stars.
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased. As for the result, inclined attitudes returned and most burdens on a wrist and the waist were l
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased.
As for the result, inclined attitudes returned and most burdens on a wrist and the waist were lost.
Furthermore, since a brake hose calls it a mesh, admiration also comes out custom, and if a brace bar is attached according to the color of a motorcycle, I will think that he is still smarter.
Incidentally ... w which was the sure almost same position when it ranked with a police motorcycle by the waiting for a signal
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA HORNET600, HONDA HORNET250, HONDA ZOOMERX, HONDA JADE, HONDA glom, HONDA glom, HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR TypeLD, HONDA VFR800, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA GB250 CLUBMAN
It attached to CB1300SF. Appearance changed gaily. The crevice between a handlebar and a stainless nut was almost lost. When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
It attached to CB1300SF.
Appearance changed gaily.
The crevice between a handlebar and a stainless nut was almost lost.
When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
View detail
Fits: SUZUKI VOLTY, SUZUKI GSX750 KATANA, SUZUKI GSX750E, SUZUKI GSX250S KATANA, HONDA FT500, HONDA FT400
It is used for GSX250S katana. It becomes the exchange from an authentic positive one. Appearance became good. Since the handle brace is not attached, numbness comes to a hand. Since an angle etc. are changed, it can arrange to oneself lik
It is used for GSX250S katana.
It becomes the exchange from an authentic positive one.
Appearance became good.
Since the handle brace is not attached, numbness comes to a hand.
Since an angle etc. are changed, it can arrange to oneself liking.
View detail
Attachment is very easy. Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think t
Attachment is very easy.
Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think that it was good.
Since it became [ of a sheet ] difficult to be locked after attachment, evaluation 4 was used.
View detail
Fits: KAWASAKI Z125 Pro, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, HONDA FORZA(MF08), HONDA FORZA Z ABS, HONDA FAZE Type S, HONDA FAZE, HONDA PS250, HONDA glom, HONDA PCX150, HONDA PCX125
As a dress-up up, it is good. They are those with impact, and the highest at appearance!
As a dress-up up, it is good.
They are those with impact, and the highest at appearance!
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250)
The balance regarded the virago with a part with a small car body and Wright being about 4.5 as --. Although the result exchanged with the blinker became satisfying, the size of a meter and the place of wiring have been shortly worrisome. Although
The balance regarded the virago with a part with a small car body and Wright being about 4.5 as --.
Although the result exchanged with the blinker became satisfying, the size of a meter and the place of wiring have been shortly worrisome.
Although it thinks that the brightness of Wright itself is satisfactory, the cheapness of a bolt nut will carry out considering the texture of stay with four stars by minus.
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250)
He thought that he would change a headlight into a bates type, and it carried out simultaneous exchange also of the blinker. It comes to a time-tested brett and an emergency exactly after all. It was not a mistake, although the headlight was as 4.
He thought that he would change a headlight into a bates type, and it carried out simultaneous exchange also of the blinker.
It comes to a time-tested brett and an emergency exactly after all.
It was not a mistake, although the headlight was as 4.5 inches and made it the arm mini.
Since wiring also added the hand this time, time was taken, but if it is only exchange, it is KASUTEMU made very simply.
View detail
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle. Appearance became very good. However, since an axel stops returning if it does not take care about past [ of a screw / a bundl
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle.
Appearance became very good.
However, since an axel stops returning if it does not take care about past [ of a screw / a bundle ] at the time of attachment, cautions are required.
View detail
Since license was acquired and it has been one year soon, it purchases to tandems. Attachment was very easy, and since it was only a bolt and a washer, it was OK by the in-vehicle tool. By good touch, appearance is also pleasing. However, remo
Since license was acquired and it has been one year soon, it purchases to tandems.
Attachment was very easy, and since it was only a bolt and a washer, it was OK by the in-vehicle tool.
By good touch, appearance is also pleasing.
However, removal of a tail cowl has become difficult by having attached the tandem bar.
It is O except it.
View detail
Fits: HONDA PS250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING400, HONDA SILVER WING600, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS2, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J)
The zephyr chi is equipped. He wanted change from normal and it purchased. It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen. Since it is comfortable b
The zephyr chi is equipped.
He wanted change from normal and it purchased.
It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen.
Since it is comfortable by having used the same color, I think that it was good.
Mind that the posture at the time of operation changed specially is not carried out.
First of all, normal could be carried out, and since it did not necessarily use, it was not thought that it became easy.
Attachment was easy, and since it did not need to exchange a brake hose for the thing of long, it was completed freely.
Since he wants change and it equips the circumference of a handle for the time being, so so satisfaction is carried out.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R
If the position was raised at any rate, it thought in order that it may be easier to make it as high as possible, and made it this product. Although a position becomes high 18 mm, if a handle is actually grabbed more than a size, it will be felt as th
If the position was raised at any rate, it thought in order that it may be easier to make it as high as possible, and made it this product.
Although a position becomes high 18 mm, if a handle is actually grabbed more than a size, it will be felt as the posture rose.
Ninja250R is the atmosphere near a naked just like CB.
It became quite [ in posture ] easy after attachment.
When running a long distance on touring, it is good touch, and the inside of a town, etc. are easy.
in a road over a mountain pass, a handle is merely high -- it is felt as 縲?
I think that it is an article good for the direction considered for inclined attitudes to be hard for the time being since it can remove by the scene which runs well since attachment is easy.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA FTR223
Although this form was pleasing and purchased, On my motorcycle (v-max), bolt-on is improper (it purchased with nothing to lose, getting to know somehow ...)! If a spacer is not used, axel wire, A switch box etc. contact a body (tear). Although th
Although this form was pleasing and purchased,
On my motorcycle (v-max), bolt-on is improper (it purchased with nothing to lose, getting to know somehow ...)! If a spacer is not used, axel wire,
A switch box etc. contact a body (tear). Although the spacer is sold only to v-max, the mind which he buys with a large sum (3 times of the price of the handle itself) does not set.
Since the truly added admiration came out of them although the handle O PPUSU pacer and Bar O IZUKITTO of a certain company were handy (prices of these about 1~2 handles), it decided to make a spacer on one's own.
of course -- being aluminum shaving and coming out -- !, of course, it has not completed yet (tear)! With a concept, if it rises 15 mm perpendicularly, I will think that it is enough.
If it completes, it will rise on my motorcycle.
View detail
Even if it uses wearing not only as being extended by appearance but as a grip part which becomes like a picture, a satisfactory situation, a totter, etc. think that it is not and if it is likely to seem ? if ineffective since it is 2.5 cm, but operativit
Even if it uses wearing not only as being extended by appearance but as a grip part which becomes like a picture, a satisfactory situation, a totter, etc. think that it is not and if it is likely to seem ? if ineffective since it is 2.5 cm, but operativity becomes good so that it is unexpected.
It uses for various vehicle types according to ideas.
View detail
Fits: HONDA HORNET600, HONDA HORNET250
It became low more than it considered, when carrying out handle exchange. However, since the handle is pleasing, it puts in and adjusts a spacer.
It became low more than it considered, when carrying out handle exchange.
However, since the handle is pleasing, it puts in and adjusts a spacer.
View detail