Reviews
I would like to see an assortment in 5 cm increments.
Purchased to change the OEM Handlebar of a MONKEY125 to a Handlebar Up Type.
I bought a 200Millimeter long, but I really wanted a 150mm longer one.
No complaints about the feel of the product. 。 Sliding was good even without going through Oil.
View detail
HURRICANEClutch Cable
Clutch Cable was cut off.
I tried to buy OEM Product!
HURRICANE's Clutch Cable is less expensive.
I bought it instantly!
It's a safe Manufacturer, so it's a Recommendation!
View detail
I bought the same one as before.
Quantity when the Handlebar was previously replaced.:Longer Clutch Cable that came as a set.
I don't have much to say in detail because I just purchased the same product in Single Item, but it helped me because the Clutch, which was very stiff, became very light.
View detail
Long clutch cable
As for the GSX750s, it seems to be a little lighter than the STD Shape because it has a wider range of handling changes.
However, STD Shape's product has a tube that suppresses the movement of Wire near Lever, but this product doesn't have it, so you may feel the movement of Wire when you move Handlebar, and it may not be bothered by the pull of Lever. The difference of the feeling was heard.
View detail
I'm generally satisfied
I changed the Handlebar of MT-09SP to Fanatic's SUPER LOW I also replaced the Clutch Wire It's good because the length of the wire becomes quite short It was, so I refreshed it
It's very easy to replace the engine side of the OEM engine, remove the OEM's engine side and replace it with a HURRICANE Lever Tie the sides together with Tie Wrap Then pull it off the OEM Clutch Side and it's done
View detail
Exchange of Clutch Cable is also accompanied by a change to Flat Handlebar
I exchanged it to fit Flat Handlebar on MT-09.
OEMClutch Cable of MT - 09 bent to Handlebar side Because gold tool is attached, buy to Clutch Cable of Made by HURRICANE without bending gold tool - We exchanged.
【What made you decide the purchase?】
Because it is the same length as the OEM and there is no bending Gold tool on the Handlebar side.
Moreover, there was no competing product of other company's products, because it was a Clutch Cable one choice of Made by HURRICANE.
【How was it actually used?】
It was written that Clutch became lighter in Impre of the other, but in my case I did not change the weight of OEM Product.
【Mounting was difficult?】
Mounting method & Difficulty is not different from OEM Product.
In the case of MT-09, it is necessary to remove Fuel Tank, but special tool is required for that, so if you do not have tools or removable environments it is better to ask for replacement at Motorcycle store or Motorcycle shop Oh, yeah..
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
Although there is no dissatisfaction about the degree of freedom of handling and the weight of Clutch, durability is a little uneasy because Wire is thin compared with OEM Product.
Since the End cap on Handlebar side is Plating like Mothers' bicycle's Brake Washer, it seemed a little uncomfortable for MT-09 which has many parts of Matte shades.
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special. Although it is for Made by HURRICANE 's Separate Handle Kit, it is appreciated thanks for submitting such a niche product.
【Have you compared items?】
Because competing products from other companies did not come out, we do not compare.
[Others]
I think that it is a comparatively niche product.
Since this Cable is already shipped to the Separate Handle Kit of Made by HURRICANE, it seems that there is nothing to be in need of such much care unless it is an application that said to exchange it with Universal's Flat Handlebar like me.
If you do maintenance properly you will not be suddenly disappearing, but just in case you have plenty of time to spare, I will buy spare items.
View detail
At the beginning, the Inner motion was more astringent than the pure Cable. since cable length is long -- resistance -- the place which put the Grease spray between the Inner and the Outer although many was thought -- an improvement. With [ it is sm
At the beginning, the Inner motion was more astringent than the pure Cable.
since
cable length is long -- resistance -- the place which put the Grease spray between the Inner and the Outer although many was thought -- an improvement.
With [ it is smooth and ] no problem after that.
Since it purchased at a low price pure, it was good.
The goods of
NORMAL length are also in addition good to have a Lineup carried out.
View detail
Since 250TR was used as the chopper, it exchanged. It is a very ordinary clutch cable which does not change at all that it is pure. An operation and application force are very pure. Without removing a tank in TR, the hind bolt was removed, and
Since 250TR was used as the chopper, it exchanged.
It is a very ordinary clutch cable which does not change at all that it is pure.
An operation and application force are very pure.
Without removing a tank in TR, the hind bolt was removed, and where a little tank is lifted, exchange was completed.
the time of die length turning a wheel to the limit of left-hand side -- ? 30 more about -- kana needed.
It is the die length to the extent that it said.
On the contrary, I think that it is exactly good die length if it is a handle of the die length like a photograph since it will pass not much when a handle is made straight if too long.
View detail