Reviews
Long is difficult to handle,...
[How is it used?
Used for SEROW225 (1KH).
The clutch was feeling a little heavy, so I replaced the clutch cable with a feeling of God's help.
The OEM was a little expensive, and this one from HURRICANE was a little cheaper, although it was Long, so we chose this one.
Was the one you received as per Image?
It was as per Image, maybe 15~20 cn longer than OEM.
Was the installation difficult?
Since it was a little longer than the OEM, we had to be a little creative in handling it. To be honest, I wished the OEM length was longer.
The connection between the Clutch Cable and the Engine Case is simple, but a little confusing.
You should take a good picture or something before you remove it to document how it was attached.
How was your experience with it?
I think it is slightly lighter. I think it can be lighter depending on how it is handled.
[Included Parts:were they on?
A white plastic cover is attached to the end of the clutch lever side of the clutch cable.
I am... Packaging Cover?" I thought, "I took it, but that is to be used as it is....
[Was there anything that disappointed you?
None
Other items that would be helpful
Items to buy together
I recommend this for lubricating Wire, although it is a bit expensive. You can throw it away except for this.
https://www.webike.net/sd/23380063/
View detail
I am satisfied.
It was the first time for me to replace the front brake wire on a motorcycle, but it was done without difficulty in about 10 minutes.
I like the color, it looks better than Black.
View detail
Well Good
Part Number:HB6858, Part Number:0605-KE3-TS Part Number:HB6859 If you purchase a total of 3 products together, you can install them on z900rs. The existing throttle cable can also be used, but it keeps the parts that you don't want to see clearly. There is no option for performance to decline or increase. View detail
It is EXACTLY on Blinker's Grounding Wire!
[How is it used?
I needed to add a Grounding Wire when replacing the Blinker on my CB1100.
Was the one you received as per Image?
It was generally as per the Image, but Wiring was quite long.
Was the installation difficult?
The wiring is too long, but it might be better to cut it short if necessary.
How was your experience with it?
I have used them on all my Blinkers and have been able to light them without any glitches or problems at all.
[Included Parts:were they on?
Nothing else, including Instruction Manualetc.
[Was there anything that disappointed you?
Not at all. The inner diameter of the ring is 10mm, which is just the right size for CB1100, and the outer diameter is small, so it is not noticeable.
▼Quantity:1 Set of 2pcs. so if there are 4 Blinkers, Quantity:2 Sets are required.
Also, if the blinker body is made of gold, a grounding wire is required, but if the material is gold, a grounding wire is required.:In the case of a plastic blinker, this product is not necessary because the grounding wire is wired from the blinker.
View detail
good product
it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you. View detail
good product
it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you. View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
I couldn't pimp it
While acknowledging the lack of confirmation ….
The handlebar side plate shape was different, so it could not be popped on, so it was reshaped and reattached using Drill and Disc Grinder.
Well, I guess this is what Universal Product is all about.
View detail
The cygnus X FI 09 Taiwan sporty was attached and used. Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product. It is recommended!
The cygnus X FI 09 Taiwan sporty was attached and used.
Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product.
It is recommended!
View detail
I put it on my GPZ400R.
I ordered a new Throttle Wire (pull) for GPZ400R D2. 2 days later, it arrived and I worked on it at night after work.
Don't remove the carburetor, just remove the Tank and Seat!
The work efficiency is not so good, but if you get the hang of it, you won't mind. I post maintenance records on social networking sites. (It's messy.) If you are interested, please look for it lol.
As for the feeling, I have driven about 600 km and so far there is nothing to worry about. The impression is that it is a little hard.
Price, quality, I wonder if this will be Base. I don't know about durability, but Large would be sturdy!
View detail
good choice
Hurricane Announcement Type 2 handle has been replaced. When replacing the product, the clutch cable stretches out in an ugly way. Because of the nature of the naked, the cable is so loose that I don't want to see it... It looks just like a genuine cable when you replace the short cable fee. When replacing the handle, make sure to replace it together View detail
HURRICANE Extended Clutch Cable
After installing the over split handlebar kit, the clutch cable is a bit tight, so I bought an extended clutch cable, and now I have turned to not interfere with the handlebars View detail
The product I received was different from the picture.
The Cover on the Lever side is not attached.
Different from the product image.
View detail
If you put it on after refueling, it will be very light.
[How is it used?
Currently installed
Was the installation difficult?
I've never done Large, but it might be difficult for someone without knowledge?
How was your experience with it?
Axel is now very light.
[Was there anything that disappointed you?
None
View detail
Very good
They are better than stock, because of this multylayer sleeve. But on the other hand it's difficult to lubricate them. Ant they are long. For very high handlebar. Too long for my classic medium size handlebar. It's not a problem for me, but keep it in mind. View detail
Realy long
this is a nice cable if you want to swap your low handlebar to a high one. But my handlebar has a classic medium size, so this cable is too long for me, so i needed to install it in a differrent way (through the steering bar) It's not a problem for my kustom, but you should to keep it in mind. View detail
very good cable
It is a cable currently used for the w800, but I bought it because I thought it was time to change the clutch and throttle cables. You'll use it well.^^ View detail
Throttle Wire replacement
I'm glad the product is what I thought it would be because it was a part I needed to replace. View detail
Products that do a good job.
I wanted OEM Parts, but they were already out of stock, so I bought them.
I was hesitant to buy it because it is 50mm longer than OEM, but I had no choice but to buy it for the above reason.
When I installed it and took it around, I didn't feel it was very long and felt it was good.
View detail
HURRICANEShort Brake Cable
I was looking for a ShortCable because I had an extra Brake Cable for my LowdownSpec.
Installation is the same as the OEM product and is easy to replace.
It would have been nice to have a Black cable in the same color as the OEM Product.
View detail
Are you sure that's the length shown?
I bought this product of 100mm long because the accelerator wire was stretched to the limit by 30mm up of the handlebar and it seemed to apply unreasonable force.
Long enough to reach Light's Lens when I replace it!
When you line up the OEMs, it looks to be about 150mm long. Definitely not 100mmLong.
It is ugly because it draws a large Loop in front of the eyes even if it is disagreeable because it is not possible to make a Route to turn other because the space that the space that Cable passes through is Limit in Motorcycle VTR250, and it associates with the antennae of the cockroach.
Longer is probably safer, but you're looking at too much leeway.
I'd like to return it, but there's nothing else I can do to change it, so I'll just cry myself to sleep.
View detail