Reviews
Satisfactory feeling of use
FOR JAPAN MODELKATANA, Mounting to OEM Carburetor.
I feel satisfied with the feeling attached.
However, it is tough to wear it.
When attaching to OEMcarburetor, because the Accelerator Wire is connected to the middle of the carburetor, the tip of Wire is difficult to attach.
Fighting with Motorcycle 1 hour. I managed to install it.
Working while thrusting hands from both SIDE, making hands black.
While opening the Spring part of carburetor with one hand, put the other hand from various angles,
I managed to get there..
It is possible to install without removing the carburetor.
However, it is limited to people with perseverance.
Usually it seems to remove the carburetor and install it.
View detail
Products with excellent Cost performance, reachable itchy items.
Mr. HURRICANE is releasing parts that are troublesome to ask at OEM Parts Number firmly.
I appreciate it..
This time the Headlight socket of PH 7 burned out, I bought a new one again.
There are lots of ups and downs around Motorcycle, Headlight.
Because it exchanged for a new article, there were no troubles, etc. Batch! There was some cheapness of making, but there is nothing wrong with the function.
I made a mistake that I mistakenly buy the Valve of PH 8... Please be careful.
View detail
Exchange from OEM to Up Handle
Practice wickedness to make KATANA Up Handle w
Well OEMWire changed handling, but it did not reach it, but it became abnormally heavy so I tried to replace it.
Since I was a long-established Manufacturer, I ordered without worrying about anything, but without any trouble finishing installation w
OEM has WireGuide in the Lever attachment part, but it is not attached to this, but thanks to that it makes it unusual for the way we are going and it seems better here.
Durability and performance, Cost performance is said to have just been installed, I will not evaluate, I hope to have a long time in frequent Maintenance ~~~?
View detail
Used to change handling
Because of the position of the Engine Starter Motor after the attachment, the SRX bypassed the 90-degrees, and the Wire's handling rapidly bent around the Handlebar, and the weight of Clutch by it was Neck.
This time it was somewhat longer than the OEM It was possible to make the Clutch operation a little lighter by using this product of Length for Up Handlebar and giving room for handling Clutch Wire around Handlebar.
Because the design of Mounting Hardware to the car body is somewhat different from the design of OEM (There is no problem for installation at all) If you are interested it might be better to remodel the OEM.
View detail
It was too long..
I bought along with NSR's Up Handlebar, but it was a little too long and I had trouble walking around. I think that it is OK even if 1Size is short.
There was no problem after firmly installing.
View detail
Handlebar change
I changed the JAZZ Front to CUB 90 and changed it to Up type Handlebar so I exchanged it because Brake Cable ceased to arrive.
It was perfect.
View detail
Ordinary Throttle Cable
It is neither good nor bad, it is an ordinary Throttle Cable.
I have not installed yet, but there are not many different points from OEM Product, there are not many Wire looks different, but I think that durability will not change.
View detail
Fits: HONDA VT400S, HONDA STEED600, HONDA STEED600 VLX, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VLS, HONDA STEED400 VCL, HONDA STEED400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW750, HONDA SHADOWCustom400, HONDA SHADOW400, HONDA SHADOWCustom400, HONDA SHADOW400, HONDA VT750S, HONDA SHADOW PHANTOM750
Looks good
Motorcycle at the time of purchase had an OEM item, but I wanted to make it Mesh Buy this item. I am satisfied with the appearance also good. I changed it from 6 Inch Drag to 8 Inch Pull back so I set it to 200 mm MeterLong, but it was a bit too long. It is not good even though it is too short, but a bit too long ....
Let's calculate Length firmly when purchasing Cable and purchase.
View detail
Exchange of Clutch Cable is also accompanied by a change to Flat Handlebar
I exchanged it to fit Flat Handlebar on MT-09.
OEMClutch Cable of MT - 09 bent to Handlebar side Because gold tool is attached, buy to Clutch Cable of Made by HURRICANE without bending gold tool - We exchanged.
【What made you decide the purchase?】
Because it is the same length as the OEM and there is no bending Gold tool on the Handlebar side.
Moreover, there was no competing product of other company's products, because it was a Clutch Cable one choice of Made by HURRICANE.
【How was it actually used?】
It was written that Clutch became lighter in Impre of the other, but in my case I did not change the weight of OEM Product.
【Mounting was difficult?】
Mounting method & Difficulty is not different from OEM Product.
In the case of MT-09, it is necessary to remove Fuel Tank, but special tool is required for that, so if you do not have tools or removable environments it is better to ask for replacement at Motorcycle store or Motorcycle shop Oh, yeah..
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
Although there is no dissatisfaction about the degree of freedom of handling and the weight of Clutch, durability is a little uneasy because Wire is thin compared with OEM Product.
Since the End cap on Handlebar side is Plating like Mothers' bicycle's Brake Washer, it seemed a little uncomfortable for MT-09 which has many parts of Matte shades.
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special. Although it is for Made by HURRICANE 's Separate Handle Kit, it is appreciated thanks for submitting such a niche product.
【Have you compared items?】
Because competing products from other companies did not come out, we do not compare.
[Others]
I think that it is a comparatively niche product.
Since this Cable is already shipped to the Separate Handle Kit of Made by HURRICANE, it seems that there is nothing to be in need of such much care unless it is an application that said to exchange it with Universal's Flat Handlebar like me.
If you do maintenance properly you will not be suddenly disappearing, but just in case you have plenty of time to spare, I will buy spare items.
View detail
I want to change a little bit
Meter, I wanted to change the Layout around Handlebar, I wanted a Cable a bit longer than OEM, I did it, I was able to do thoroughly as I expected.
Moreover, I think that it can be used as a substitute because I think that it is not inferior to OEMCable.
View detail
Fits: HONDA Dio XR Baja, HONDA LIVE DIOSR, HONDA TACT, HONDA DIO (2Cycle), HONDA ZOOMER, HONDA SUPER DIO, HONDA SUPER DIO
I bought it for Long wheel base.
Length is just right, probably it is supposed to be when the Handlebar side got longer, the position of the Cable stop under the Fuel Tank is quite Gap.
Because it got longer, the return of Brake is bad at the end.
View detail
Fits: HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Throttle Cable for disconnection
Reverse SideThrottle Cable I bought it for disconnection. It was my first work but it was easier to exchange than Image. Quantity : 1 Set of 2pcs. So I also replaced Pull Side. As for durability, it is still unclear because I just changed it, but the price is also cheap and I am extremely satisfied. Because it is longer than OEM Product, people with Normal handles may need to pay attention to the line's handling slightly.
View detail
Bimmy on Elbow ...
SR400 【Year of 2003】 And we are exchanging Handlebar with DAYTONA's Trucker bar. Because the height and width have been changed from OEMHandlebar, Clutch Cable also purchased this item 10Centimeter longer than OEM Length.
I felt that Spring is wrapped around the Cable part and the adjustment range is small difference with the other company's products.
For reasons of 3 ☆ as an evaluation ... less adjustment range by exchanging, not having handling Instruction Manual attached, price etc etc. It is the result that comprehensively judged.
In the future, deterioration degree of Spring wound in Cable (rust etc etc. ) And the durability of Cable itself etc.. We will focus on.
View detail
Great for using extended long handle bar as original are too short. Great lasting product. Fixtures need to open the set covers
Great for using extended long handle bar as original are too short. Great lasting product. Fixtures need to open the set covers View detail
With the long cable fir the rear brake, you can change the handle bar longer or higher. This portion are for e top cable to the rear brake lever.installation need to dismantle the center portion to change the cable. Bestt to be done by professionals mecha
With the long cable fir the rear brake, you can change the handle bar longer or higher. This portion are for e top cable to the rear brake lever.installation need to dismantle the center portion to change the cable. Bestt to be done by professionals mechanics thats my advice. View detail
Although it is not visible with a photograph, a thing like Spring Guard ? to 2 neighborhoods for 3 minutes of a Cable is attached to the surroundings of the Stainless mesh, and it is a Cable very good for the measure against heat, and protection.
Although it is not visible with a photograph, a thing like Spring Guard ? to 2 neighborhoods for 3 minutes of a Cable is attached to the surroundings of the Stainless mesh, and it is a Cable very good for the measure against heat, and protection. View detail
With Handle exchange, since extension of the Wire was required, this product was purchased. Although there should just have been a goods Lineup which can choose die length a little more gradually if it may be allowed to wish so much, the quality
With Handle exchange, since extension of the Wire was required, this product was purchased.
Although there should just have been a goods Lineup which can choose die length a little more gradually if it may be allowed to wish so much, the quality itself is completely satisfactory.If there are some whose die length suits to its Motorcycle exactly, it can use in comfort. [ ]
View detail
Fits: HONDA solo, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD, HONDA XR100MOTARD
Although it was quite irregular attachment this time, it chooses by a simple pure type Long cable. Although there is no appearance which looked to advantage, it is a Manufacturer which wants to choose it as a Simple very much at the Handle custo
Although it was quite irregular attachment this time, it chooses by a simple pure type Long cable.
Although there is no appearance which looked to advantage, it is a Manufacturer which wants to choose it as a Simple very much at the Handle custom for which a pure Cable does not reach an understanding well.
View detail
[Webike Monitor] It diverted to VTR250. if pure when the Wire exchanges for the Throttle holder of the Type which comes out ahead -- -- die length not suiting naturally but finding here [ of die length right by chance just ] -- purchase.
[Webike Monitor] It diverted to
VTR250.
if pure when the
Wire exchanges for the Throttle holder of the Type which comes out ahead --
-- die length not suiting naturally but finding here [ of die length right by chance just ] -- purchase.
quality is very good at the pure average and more than it.
View detail
Fits: HONDA CB400SUPER BOLDOR vtec III, HONDA CB400SUPER BOLDOR vtec III, HONDA CB400SUPER BOLDOR vtec Revo, HONDA CB400SF Revo, HONDA CB400SF vtec III, HONDA CB400SF vtec II, HONDA CB400SF vtec I, HONDA CB400SUPER BOLDOR
[Webike Monitor] The Clutch cable was made into a 15-cm Long with Handle change. Making is solid and appearance, a using feeling, and a feeling of a Fit are not different from a pure Cable. It was likely to be enough also with a 10-cm Long fo
[Webike Monitor] The Clutch cable was made into a 15-cm Long with
Handle change.
Making
is solid and appearance, a using feeling, and a feeling of a Fit are not different from a pure Cable.
It was likely to be enough also with a 10-cm Long for Hardy road bar HIGH at
CB400SF.
View detail