Reviews
It was a little long for me.
[How is it used?
After six months of hanghang and Restore&Custom work on the LITTLE CUB, I thought I'd get comfortable with the next stage of the project. First, we need an external power source. I started looking for a USB power supply, but realized that there was no place to install them, so I looked for a Mount Bar in Webike's product introduction section and bought a Multi Bar from Made by HURRICANE, which had a safe design.
How did you like it?
Although I knew it existed until now Messy around the Handlebar. The Mount bar had never been used before because I had the impression that it was too heavy.
The fact that I had a safe length and design for my first Mount bar purchase and I was a teenager. Separate handle (Handlebar of Separate type)". Speaking of Other Brand Products of "HURRICANE It was an Image that I was not surprised to see. Finally, I too will buy HURRICANE products." I bought the Multi Bar at Tension...but the bar was a little too long for my use.
Please don't get me wrong, the product itself was a good product with good rigidity, but for my personal use, I would have preferred a shorter length, so after much thought, I replaced it with a Mount bar made by another company.
We wanted to use a Short Type Mount Bar to make it as Refreshing as possible, since we only need to be able to fix the USB power supply and Smartphone Holder.
How did it compare to other products?
If it is a MAJOR Manufacturer's product. "A damned glitchy piece of junk." I don't think there are any.
Before you buy Which car? of Which part? and there you want to install it in What do you want to install?" I think that Risk can be reduced if you take into account the following before making a purchase.
[Points to note]
This product is a type that is attached to the Mirror Holder by fastening it to the Mirror Holder, so it is easy to set the quantity to a position that is easy to use.:Once set, please tighten and secure each part firmly, otherwise you will be in a hurry if it loosens while driving... (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
As I mentioned above, I didn't even understand the difference between the Mount bar and I didn't think it through. HURRICANE Products I bought this product only because it was a very solid product with no fault of this product over and over again.
【Included Parts:presence or absence】.
Bracket for connecting Mount Bar Body and Mirror Holder, 2 Washers and Spring washerQuantity:1pc. and Nut included.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
It resonates with my father's generation. "HURRICANE BrandName, we look forward to continuing to serve you with a variety of custom parts at affordable prices.
View detail
Short Type looks more SMART.
Bracket height of Clamp Bar is
The lower it is, the more SMART it looks.
I am happy with Refreshing.
View detail
Smartphone Holder Installation
I bought this one for mounting Smartphone Holder.
It was possible to install the handlebar not by attaching it to the handlebar, but by attaching it to the Mirror Fixing Section of the Cowl Bracket.
It seems to be possible to install it in the mounting position and Bracket's orientation to protrude in the front, or in the back, depending on your preference.
The object itself is coated in SteelBlack, so it is a bit heavy, although it would be lighter with MaterialAluminumBlack surface treatment.
Also, it would be better if the included screws, etc., were also integrated in black so that they would not stand out, but we plan to replace the screws with black ones at a later date.
View detail
1
12627388584939484839 View detail
1
1211111244322二? View detail
attachment
It's pricey, but the grooves in the included Bolt are too shallow to bite and hold it securely in place. View detail
Exactly to the phone Mount.
The SV650X has a separate handle, so I wasn't sure how to install the phone mount, and that's how I arrived at this product. View detail
GOOD
It's very helpful because there is no clutter around the Handlebar.
I usually attach the Mount Bracket to my phone.
The strength seems to be there as well.
View detail
Concept is good
Since the USB power supply is integrated with the Clamp Bar, you can avoid messing around Handlebar. There is no problem at all as long as attaching smartphone strength. However, if you fix the Camera to a position far from the Bracket to hold it with only One Side, it will pretty much vibrate, so I do not think that is suitable for such use. I think that there are two USB if you want greed. Although it is also pointed out by others, it is difficult to remove Cap every time. I wonder if there is something hang. View detail
It is good
Mistuba's MSC-BE 700 E (ETC2) We used Antennas and Indicator to attach to the Left Side of Handlebar.
Usability was very good with the Large size just feeling good.
But the price is expensive.
View detail
Especially it can be used without problems / MT-09 トレーサー
The circle diameter of Pipe part is the same as Handlebar diameter.
If it is a thing that can be attached to Handlebar, you can install Large,.
It seems that the paint is strong, I applied the tool at the time of attaching the Small object, but it was a good impression that the paint did not peel off like a cheap article.
View detail
I am satisfied..
I installed it to fix the smartphone. Because it is only a smartphone, this length is enough. There is no Stress on inserting / removing the key. It was also very attractive that USB was also integrated.. However, I do not understand the opening and closing hang of USBCap, it is a little difficult to open. View detail
By dedicating, Bracket and others are OK
Clamp Bar and USB will be messed up separately, so you can install it on Simple with built-in USB.
When not in use USB part can be locked with kitchen and countermeasures such as rain are done firmly. That Cap is stiff accordingly.
View detail
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order) It worries about whether it will delete with the sanding machine, or it leaves as it is, and is inside.
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order)
It worries about whether it will delete with the
sanding machine, or it leaves as it is, and is inside.
View detail
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased. Although that made from DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA. (compactness -- if -- although it is DAYT
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased.
Although that made from
DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA.
(compactness -- if -- although it is DAYTONA ...) --
-- use good point
and Bracket -- use an antenna installation part -- there is wall thickness of a component firmly --
There is likely to be intensity.
The degree of freedom of
and installation is high.
(Although joint form is bad and a motion has restriction in part, it will OK, if the
joint is deleted) Although bad
point
and Laser cut are carried out, since it does not bevel, the BALI remains, and it is
. Those with a possibility that it may be suddenly injured.
Considering only
and an ETC antenna, an Antennas setting face is too large.
If it manufactures with an Aluminum in itself (except for Screws) and alumite treatment is carried out, a color
Variation will also increase and I will think that it is by OK. [
]
View detail
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it. Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product A degree of freedom is in the
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it.
Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product
A degree of freedom is in the
fixing position and an angle, and it does not take pains over wearing.
Structure is also solid and it can fix firmly.
View detail
Also in themselves, all surrounding friends are also using this. You may be easy to attach.
Also in themselves, all surrounding friends are also using this.
You may be easy to attach.
View detail
I think in a price that it is a thing as which a considerable function and finishing may be sufficient.
I think in a price that it is a thing as which a considerable function and finishing may be sufficient. View detail
The its original work Antenna stay was used. Although he thought that it was able to improve very well, the merit of completion of marketing is astonishing too, seeing a friend using the Antenna stay of a HURRICANE, and it resulted in purchase. It
The its original work Antenna stay was used.
Although he thought that it was able to improve very well, the merit of completion of marketing is astonishing too, seeing a friend using the Antenna stay of a HURRICANE, and it resulted in purchase.
It fits attaching in the circumference of a Handle as a Refreshing, an ETC antenna does not self-assert too much, and it is good touch.
View detail
Two-piece possession. One piece is an ETC antenna (separation type) and an object for indicators. One more piece is an object for radar finders. (A magic tape is attached and the thing for cars is attached to this stay.) Also being able to
Two-piece possession.
One piece is an ETC antenna (separation type) and an object for indicators.
One more piece is an object for radar finders.
(A magic tape is attached and the thing for cars is attached to this stay.)
Also being able to adjust a removal OK angle easily, if it rains, user-friendliness is a cinch.
(However, adjustment is impossible unless it has a hezagonal wrench.)
View detail