Reviews
Sissy bar Backrest Pad (STEED 600)
The Fitted sissy bar info >> https://www.japan-webike.kr/en/products/2075672.html Back side of this pad looks(feels) like wood or MDF? PVC? IDK(i dont know) anyway ts Hard material i guess @_@))) soft and cushion and the mount bolt using 4" Allen wrench with washer. i hope this bolt and bar get no Rust... take care Hurricane Shishiba This pad is applied to 720mm. Only Shishiba corresponding to HA6431-HA6432-HA6437 can use this pad. Be careful. View detail
Concept is good
Since the USB power supply is integrated with the Clamp Bar, you can avoid messing around Handlebar. There is no problem at all as long as attaching smartphone strength. However, if you fix the Camera to a position far from the Bracket to hold it with only One Side, it will pretty much vibrate, so I do not think that is suitable for such use. I think that there are two USB if you want greed. Although it is also pointed out by others, it is difficult to remove Cap every time. I wonder if there is something hang. View detail
It is good
Mistuba's MSC-BE 700 E (ETC2) We used Antennas and Indicator to attach to the Left Side of Handlebar.
Usability was very good with the Large size just feeling good.
But the price is expensive.
View detail
Especially it can be used without problems / MT-09 トレーサー
The circle diameter of Pipe part is the same as Handlebar diameter.
If it is a thing that can be attached to Handlebar, you can install Large,.
It seems that the paint is strong, I applied the tool at the time of attaching the Small object, but it was a good impression that the paint did not peel off like a cheap article.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250
Utility and appearance are Up!
Use the Touring net when fixing the touring bag etc to RearSeat with REBEL 250. Hook was hooked on the edge of Rear Fender and used it. Returning from Touring and trying to remove Hook, REBEL was surprised that the hook of Touring net was in contact with Tire while driving while it was scraping because there was not much gap between Tire and Fender.
So, if you are looking for something good, I found this Items in Wee Big's recommended item, "This is it!" I immediately decided to purchase.
Try using, Hook rubs with Tire and can be scraped (!!) Eliminate anxiety. Goodness of use that can be used only with Net by removing Hook. As a bonus, REBEL's Rear Fender's awesome design around (There are individual differences in likes and dislikes, but I do not dislike the simplicity as well) It becomes an Accent of One point to Small Sana Plating parts, but is not it appealing quite a presence?
I think this Items is an absolutely recommended item for people riding REBEL. Only one price is dissatisfied. If it is a little cheaper Cospa is ★ Quantity : 5pcs. was.
View detail
I am satisfied..
I installed it to fix the smartphone. Because it is only a smartphone, this length is enough. There is no Stress on inserting / removing the key. It was also very attractive that USB was also integrated.. However, I do not understand the opening and closing hang of USBCap, it is a little difficult to open. View detail
Hex with Pin is common
Bolt's Size is Standard, so it's better to use Washer. It was good that it was a Large dress like the Truss head. Hex hole Heso attachment is not so special, but it is not general, I think it is good. View detail
Special Bolt, expensive
Purchase for License Plate installation. There were other candidates for special Bolt, but I made this item at the price. It is not so difficult to obtain tools with Hexo HexBolt, but it is not common, so it seems to be effective. However, I can not ignore the high unit price. View detail
By dedicating, Bracket and others are OK
Clamp Bar and USB will be messed up separately, so you can install it on Simple with built-in USB.
When not in use USB part can be locked with kitchen and countermeasures such as rain are done firmly. That Cap is stiff accordingly.
View detail
ETC Used for Bracket of DAYTONA for theft prevention.
? 【What made you decide the purchase?】
Same as Bolt of OEM Product.
? 【How was it actually used?】
Both Thickness and Length fitted snugly with the same Size as OEM Product.
? 【Was it difficult to install? (Hard parts case)】
It is easy to install as it is just replacing with OEM Product. Depending on Bracket's position it may interfere with Handlebar etc..
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
Easy to install.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
Size is perfect so there is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
Black color is also nice.
? 【Have you compared items?】
KIJIMA Safety button cap bolt
? [Others]
I am thankful that the tools are also included.
View detail
Large texture
Because it is Large, preference may be different if you consider it as the design of the body.
However, since it supports up to the waist, you can leave the upper body as large as you like, ride comfort is outstanding and it faces long distances.
The accuracy of the assembly was outstanding, and it was able to be mounted without problems in particular.
Since I am diverted from Universal Product and other cars, there are many things to be processed, but it is pleasant to stick with pongs without processing.
View detail
I'm glad I bought it
For Trike I put it somewhat widened and I replaced Bolt for a longer guy.
It is cool to match the atmosphere of Motorcycle !!
I'm glad I chose this!
View detail
Fits: YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA Bolt
Large bigger than I expected and firm.
I think that it will be able to hook bigger and bigger hooks than I thought. Plating is clean and texture is good. Since it is inconspicuous when looking at the far eye, I will not break the Motorcycle style. People who do not want to attach Saddlebag think that it is convenient if it is at loading.
I hope that the price is cheaper a little more, but it may be unavoidable to think of the texture.
View detail
Make best
I used it as a hook hooked on the footpeg of DJEBEL 250 XC.
I found it useful to have a hook here and there but I decided on a color and rare form.
Installation Bolt is also included, but replaced with SUS with cheap Plating than Homsen Bolt and installed.
Parts hooked from common jar type are also large enough to be easy to use and satisfied.
It looks like a footpeg's Knee Slider, but it is convenient if there is a hook near here.
View detail
Bargains from other Manufacturer.
To install TANAX's Tool Bag and Spec. I purchased it for change. It is favorite to say that the bar is not too high just 1 inch with the same thickness as Handlebar.
Black painted Luster also has a sense of quality. The only disappointment was that the adhesive at the moment of fixing the end cap of the bar was easily removed. So I fixed it with a strong adhesive of Soft Type.
In my case, because it is the purpose of installing the Tool Bag, I do not attach the rest pad like a picture.
I think that it is hard to attach to the car body because the bar is unitary but it is inexpensive and inexpensive compared to other Manufacturer's items so it is recommended for those who are considering purchasing Backrest.
View detail
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order) It worries about whether it will delete with the sanding machine, or it leaves as it is, and is inside.
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order)
It worries about whether it will delete with the
sanding machine, or it leaves as it is, and is inside.
View detail
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased. Although that made from DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA. (compactness -- if -- although it is DAYT
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased.
Although that made from
DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA.
(compactness -- if -- although it is DAYTONA ...) --
-- use good point
and Bracket -- use an antenna installation part -- there is wall thickness of a component firmly --
There is likely to be intensity.
The degree of freedom of
and installation is high.
(Although joint form is bad and a motion has restriction in part, it will OK, if the
joint is deleted) Although bad
point
and Laser cut are carried out, since it does not bevel, the BALI remains, and it is
. Those with a possibility that it may be suddenly injured.
Considering only
and an ETC antenna, an Antennas setting face is too large.
If it manufactures with an Aluminum in itself (except for Screws) and alumite treatment is carried out, a color
Variation will also increase and I will think that it is by OK. [
]
View detail
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it. Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product A degree of freedom is in the
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it.
Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product
A degree of freedom is in the
fixing position and an angle, and it does not take pains over wearing.
Structure is also solid and it can fix firmly.
View detail
Also in themselves, all surrounding friends are also using this. You may be easy to attach.
Also in themselves, all surrounding friends are also using this.
You may be easy to attach.
View detail
[Webike Monitor] In the Impression of the method of what [ ], what arrived although the form of the Head had become stands on star-shaped middle for 1 Honbo .. was the form where 1 Honbo is standing on the middle of a hexagon. Since it was a hex
[Webike Monitor] In the Impression of the method of what [
], what arrived although the form of the Head had become stands on star-shaped middle for 1 Honbo .. was the form where 1 Honbo is standing on the middle of a hexagon.
Since it was a hexagon too when the picture was seen at other Sites, possibly there was Design change.
(Incidentally with the same product of DURA-BOLT, it seems to be 1 Honbo in the star-shaped middle) Since a Nut is also attachment the Wrench only for
, and for through holes, it is with whether it is such a thing in price.
It is likely to become an Appeal of the grade a few is anxious about theft prevention.
View detail