Reviews
Replace from dark 4.5Inch
The light bulbs were changed to LEDs and the brightness is perfect.
Flat lens is the best for parenthesis.
View detail
good!
At first, I didn't know how to install it. However, there was a manual inside, so it was easy to install. It was a little hard. If you look at it a little, you'll be able to install it completely View detail
Easy to install
Installed on a 2021 YAMAHA BOLT Shoulder Bag.
Since it was dedicated to the model of the car, I was able to install it without any particular difficulty.
To match the car body, we painted it Matte Black by ourselves.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
It's a little lumpy.
I was wearing a delicate bracket for Bates, but it was ruined by vibrations, so I went to HURRICANE.
The bracket is a pedestal type, so it is firmly fixed.
TWs and single-cylinder engines vibrate a lot, so if you have a slender bracket, it will break.
I've had no problems at all since I started using this.
good point
The light intensity is small but sufficient.
The Bracket is the base, so it is firmly fixed.
Light's Wiring, etc. are also nicely organized.
The quality of the plating is also good.
This is not a problem at all.
The vibration can loosen the parts, so it is essential to fix them firmly and strongly.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, HONDA SL230, YAMAHA BRONCO, YAMAHA SEROW225
It is resistant to vibration.
This is the Bracket of Front Blinker.
The blinker blinks more regularly than before because it is more solidly built than other companies' blinkers and is fixed firmly. The blinker now blinks more regularly than before. Since it is a single cylinder engine, the vibration is more likely to be caused by the large size of the engine, which makes it easier for the parts to come loose. The bracket should be large enough to hold it in place.
good point
Securely fixed.
The background music is beautiful.
It is also strong in Rust.
The blinker is not just a point that needs to be held in place.
View detail
Fits: KAWASAKI 250TR, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA APE TypeD, HONDA FTR223, HONDA CB223S
I bought it because of the replacement of headlight STAY.
I bought it because of the replacement of headlight STAY. I bought it because I wanted to use a genuine winker. It fits well without any problems and it's good that the look I wanted came out the way I wanted it's good! View detail
Replaced with the same etc. product because the NORMAL bulb was broken.
I bought this as a for replacement for my 12V10W Blinker Valve that ran out.
Installed on SEROW225 (WE).
Because it is not LED and it is a NORMAL substitute, the price per 1pc. made it to this cheapest in Webike.
In mass merchandisers, Quantity:The price was about the same for 1pc. so I think the cost is good.
Since it is 1pc. that I exchanged this time, I will keep the rest as Spare.
I thought about changing to LED, but I had to replace 4 Relay+Valve, and it's a 90's Motorcycle… so I decided to forgo it this time and keep the STD Blinker and use regular bulbs.
View detail
Thank you for the delivery.
I haven't installed it yet, but I'm happy that it's delivered safely. I'd like to leave anywhere if I could imagine a w800 that would fit well. If the delivery is a little late because the webike is out of stock, the delivery will not be too late! View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
The thing is certain.
I chose the Bates Headlight for my trucker custom.
Even though it is a fashion product, I wanted to make sure that it was visible and I wanted a product that was easy to install.
good point
It is small, but the function as light is enough. It is quite bright.
Bracket and Wiring are also Quantity.:It is easy to install because it is set.
The texture of Plating is good.
It's an Exclusive Design model, so it definitely looks good.
I think it's cheaper than I thought.
A bad point
● No, I don't.
The light became the first small, and it became the front circumference that was refreshed.
View detail
Simple and Parenthesis is good.
I was looking for a Small Type Blinker and I found POSH product. It was easy to install. View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
Bought this because it looks good.
I bought this product because it looks good and it was easy to install from OEM light. View detail
For OEMs and Fenders
The FTR 223 I bought is so thin that when I stepped in puddles, I got dirty on my back, so the Rear Fender is a must-have item. View detail
Beautiful turn signal
Beautiful turn signal Made from quality materials, beautiful colors, large size There is a lot of light. Can see well Complete installation equipment Can be installed by yourself in a little time Suitable for many car models, both front and back. With fast delivery I am very happy with this product. View detail
Great look and great feel !
I purchase a couple Lucas lens from Hurricane to replace the crashed old one. They are really really high quality, clear and slick. I will not worry about break lens agains.. View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250
Simple and cool
I couldn't help but like the REBEL OEM tail lamp and decided to replace it
Since I can't use the OEM Blinker as it is, I replaced the Blinker as well
POSH Faith Aluminum Machined Shell Type Blinker NarrowShort Bracket I put a
The Size feeling meshes surprisingly well, and the width is less prone to popping out too much, which I was worried about just
I like it quite a bit, being about the same size as the Rear Fender
If you are installing a Black Rear Fender with Silver Mounting Bolts Because I'm very concerned about the fact that
I changed to a Black Bolt
Also connect the extension wiring from the tail lamp with Bullet Type Terminal But when Blinker is also replaced
Blinker's wiring also has to be extended, so it's all Bullet Type If you connect with the terminal, you can connect to REBEL's
Under the Rear Fender it gets very cramped I was a little concerned about that
View detail
Parenthesis is nice with Simple !!!
HURRICANE I wanted from a long time ago : LED Dagger Blinker Kit! Finally purchased.
HURRICANE : Ad Dise when LED Dagger Blinker is installed.
? After exchanging for DaggerBlinker, Position disappears. However, on the Blinker connection Plus side, the rectifier Diode 6 A (What makes the flow of electricity unidirectional, feel like a check valve !?) By using Position lamp will revive. (If you do not need Position separately, Large is durable! Those who think, please thru. Position lamp is nighttime ? It is for self appeal within Tunnel. When you are driving a car, Motorcycle running with only Headlight, Motorcycle running with Position and Headlight on and running, which one "Motorcycle!" Do you understand? Position lamp is also part of Large thing. If you can resurrect you should resurrect)
? The attached Relay is three lines with 1 pc more connection than Grom OEMRelay. Quantity : 2pc must connect the Grom OEM connection and the remaining 1 pc to Body ground ? ? ? In Body ground, Maintenance will be worse in situations where you must also remove Body ground every time you remove HeadLight body. I am also on the Blinker line Earth (Minus line) As I came, I decided to take Earth there and finished it with maintainability.
? Rear needs to extend! But my grom is exchanging with Takegawa's Fender Eliminator, so I do not know the OEM's Fender. And since BlinkerWiring is exposed, Wiring Cover protected Wiring. Also, since Wiring is long, it is adjusted to OEM Length and connected.
* It will be Ad Vise to the last. Those who will be referred to thank you at your own risk. Shorting the LED Blinker will make it impossible to use, so if you are not confident in installing or you are not confident in the electric circuit please ask PRO.
View detail
Refreshing and Parenthesis good
Since NORMAL is too big, I replaced it and the appearance was very refreshing and I became better with Parenthesis.
I purchased Clear, but I am very satisfied because I do not disturb the color scheme of the car body.
View detail
Fits: KAWASAKI 250TR, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA APE TypeD, HONDA FTR223, HONDA CB223S
Sufficient strength, finished casually without discomfort
When replacing Font Blinker of CB 223S
I used it.
Bolt 1 pc, Bracket has enough wall thickness for installation
I could firmly install it.
It looks strange and inconspicuous and it's natural finish
Screw hole processing etc etc. I was able to attach a blank piece.
View detail
Refreshed.
NORMAL's huge amount and Quantity : Pair (for Left and Right) I bought it because I wanted Refreshing Blinker overhanging to.
I asked Shop that I always take care of the installation. Although Front's STD Blinker seems to pass through directly to Front fork, it seems to be clamping, but it seems that it is possible to detach it by removing the fixed Bolt as it is without removing the Top Bridge in particular.
For American, Bullet Blinker, a classic Bullet Blinker, had an impression that the person of Mini type was a bit too small for private, but after exchanging it, the car body became Narrow feeling very satisfied.
I feel secure because it is also solid and conforms to the safety standards and probably will go through the vehicle inspection, so I can feel relieved.
View detail
It can also be installed in JAZZ.
Probably I bought it with momentum that I'd be durable, I could install it with Small machining.
Even at JAZZ I like the fit well.
There is also a License PlateLight, so there is no special hardship in that respect.
View detail