Reviews
Fits: SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy
meticulous manufacturing
It was good up to the point of installing the Coupler on the body side of the NORMALIndicator with the Coupler, but the remaining Black color code was installed with Tap for Connection and the Instruction Manual's Sky blue code. The sky-blue code is used to connect to the Quantity:There are 2 pcs and the first connection failed, but I opened the Tap and connected it to the dark sky blue cord and it lit up fine. View detail
Same as OEM Product
Purchased due to lack of OEM Product.
The product is comparable to the OEM Product.
View detail
Fits: HONDA CB750F, HONDA CBX400F, HONDA CBX550 F/INTEGRA
No problem if not OEM
The Tachometer needle started to dance, so I wanted to replace the Cable just in case before the MeterOH.
I was going to go with OEM Product, but chose here with Point.
The actual installation was no different than the OEM product and there were no problems with operation, etc.
View detail
Mood changes.
[How is it used?
It was put on the Meter of a YAMAHA TZr50R under Restore.
Was the one you received as per Image?
When I first saw it, I thought it was the real 120km. However, upon closer inspection, I realized that it was a Seal.
I think it is good because it is not immediately obvious to a stranger.
Was the installation difficult?
I think it is easy if you degrease it well and do not shift it.
How was your experience with it?
It would be useful to have a 50cc 2st that swings through the meter.
[Included Parts:were they on?
None in particular
View detail
Commonly usable
I bought it to change back to Black from Mesh.
I was worried about the length of the meter because it is tilted toward the front with the meter 2cm up from the OEM, but it fit just right.
Meter needle wander was also improved.
View detail
MeterUp works well enough.
I bought it to change back to Black from Mesh.
I was worried about the length of the meter because it is tilted toward the front with the meter 2cm up from the OEM, but it fit just right.
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA
If the length is suitable, it can be used for other vehicles!
It was 40mm longer than ESTRELLAOEM, so we diverted it to another Kawasaki vehicle.
Cable ringing was minimal and the mesh texture was good.
The mounting part is only lightly tightened with pliers.
If it is weak, it will come off while driving and the Cable inside will fall. (Experienced)
If it is strong, it will be damaged because the mounting part is thin.
View detail
It wasn't easy.
I bought it because I needed to change the handlebar.
I used WeBig because I was certain that no local Motorcycle parts store would be able to sell the parts I needed.
I think it is unnecessary for those who can do the processing themselves, but for amateurs, it was a very helpful part.
View detail
Replace from dark 4.5Inch
The light bulbs were changed to LEDs and the brightness is perfect.
Flat lens is the best for parenthesis.
View detail
good!
At first, I didn't know how to install it. However, there was a manual inside, so it was easy to install. It was a little hard. If you look at it a little, you'll be able to install it completely View detail
Speedometer Cable Replacement
MATCH to GL500 CustomSpeedometer - no more Speedometer wander. View detail
In a way, StickerTune.
I am Restore and Customizing ns1 which was given to me by an acquaintance. I have converted it to the original Ni-registration, so I put this Seal on the Meter. The shape and typeface of the Seal is the same as the original one up to 60kg. Miraculously, I was able to paste it on Beauty in one shot, but it is difficult to paste the spacing at the same position. It is one Seal, but I feel like it is more powerful! View detail
Easy to install
Installed on a 2021 YAMAHA BOLT Shoulder Bag.
Since it was dedicated to the model of the car, I was able to install it without any particular difficulty.
To match the car body, we painted it Matte Black by ourselves.
View detail
HURRICANE Meter cable for Gratola
[How is it used?
Meter cable was broken, so I quoted OEMMeter cable, but it was too expensive.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Simply replace the original Cable.
How was your experience with it?
Nothing is wrong.
[Was there anything that disappointed you?
I'm not complaining
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR1100
I love it!
It is larger than OEMHorn and the plating shines brightly, making it stand out considerably. The sound is generally the same as OEMHorn.
The Engine Guard of my dsc400 is bumping against the Bracket, so I installed it simply with Home center, no problem at all.
I like the Large change.
View detail
It is EXACTLY on Blinker's Grounding Wire!
[How is it used?
I needed to add a Grounding Wire when replacing the Blinker on my CB1100.
Was the one you received as per Image?
It was generally as per the Image, but Wiring was quite long.
Was the installation difficult?
The wiring is too long, but it might be better to cut it short if necessary.
How was your experience with it?
I have used them on all my Blinkers and have been able to light them without any glitches or problems at all.
[Included Parts:were they on?
Nothing else, including Instruction Manualetc.
[Was there anything that disappointed you?
Not at all. The inner diameter of the ring is 10mm, which is just the right size for CB1100, and the outer diameter is small, so it is not noticeable.
▼Quantity:1 Set of 2pcs. so if there are 4 Blinkers, Quantity:2 Sets are required.
Also, if the blinker body is made of gold, a grounding wire is required, but if the material is gold, a grounding wire is required.:In the case of a plastic blinker, this product is not necessary because the grounding wire is wired from the blinker.
View detail
The accurate sticker
This is use for my NSR80, since the meter is only show 0-80km, but the maximum speed can go to 120km, so this is one is necessary to use. I bought it and found this is perfect and good condition with a good packing of shipping. This is the only brand have this sticker and this is easy to use , just stick it, complete! A lot of people using this sticker including some of my friend also ride NSR80 and they bought it and introduce me to bought it to stick it also. The accuracy is great. I am happy to bought it. View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
It's a little lumpy.
I was wearing a delicate bracket for Bates, but it was ruined by vibrations, so I went to HURRICANE.
The bracket is a pedestal type, so it is firmly fixed.
TWs and single-cylinder engines vibrate a lot, so if you have a slender bracket, it will break.
I've had no problems at all since I started using this.
good point
The light intensity is small but sufficient.
The Bracket is the base, so it is firmly fixed.
Light's Wiring, etc. are also nicely organized.
The quality of the plating is also good.
This is not a problem at all.
The vibration can loosen the parts, so it is essential to fix them firmly and strongly.
View detail
Vibrations are inevitable, so take precautions.
This is a vibration problem.
The Indicator started to light up weirdly due to vibration. I had to fix it well, so I bought a reliable one from HURRICANE!
The terminals and such are clean, so it's easy to plug in.
good point
It's quite sturdy, and the vibration has eliminated the bulb breakage and strange lights.
Indicator's colors are also easy to see.
The terminals are neatly organized and easy to install.
Single-cylinder engines are prone to vibration. I think it is important to select parts that can withstand the vibration.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, HONDA SL230, YAMAHA BRONCO, YAMAHA SEROW225
It is resistant to vibration.
This is the Bracket of Front Blinker.
The blinker blinks more regularly than before because it is more solidly built than other companies' blinkers and is fixed firmly. The blinker now blinks more regularly than before. Since it is a single cylinder engine, the vibration is more likely to be caused by the large size of the engine, which makes it easier for the parts to come loose. The bracket should be large enough to hold it in place.
good point
Securely fixed.
The background music is beautiful.
It is also strong in Rust.
The blinker is not just a point that needs to be held in place.
View detail