Reviews
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
good value for money
Material of Type using K-FACTORY's OEM License Lamp:I purchased this Eliminator to replace my Stainless Steel Fender Eliminator, which has a Stainless Steel base plate, black chrome plated and clear coated finish. I am satisfied with it because it is less expensive than other manufacturer's Fender Eliminator. In my case, I replaced the blinker with a POSH one, so it took time to adjust the angle and position of the blinker.
Of course, the accuracy was also fine. However, it would have been better if the bolts on the base plate were black instead of stainless steel.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Refreshing with Slim design
I bought it because I wanted it to look Refreshing and Sexy from the back.
I am quite satisfied with the design, which is slimmer than other products.
I think most of the other companies' products are a little more blobby.
With this product, it seems as if it is integrated with Cowl.
The Instruction Manual was easy to understand and the DIY installation was a breeze.
View detail
HURRICANEFender Eliminator Kit
Wiring is also good because the Cover in the OEM Fender can be used as it is, so Wiring can be hidden. View detail
Looks better than stock
Does the job on my JB03 Monkey125. Lighter, more compact and better looking than stock Honda one. There are better looking ones available now, but this model was the cheapest at the time I bought it. View detail
High quality
The fitting was good, and the HarnessAdapter setting was smooth. The fitting was good and the HarnessAdapter was set up smoothly. View detail
Simple and good.
I wanted something with a crisp ParisRefreshing design as much as possible, so I chose this product.
However, as you can see, the rear tire is exposed, so my friend who was running behind me was not able to see the tire.
I never want to run behind you on a rainy day."
I was told.
View detail
Easy to install and good look
This eliminator kit is within a hour installed and contains all parts nieder. I had to readjust the angle of the Lizenzen plate due to german law. That is no problem with this product. Recommended. View detail
Fit as expected
I am satisfied with the Large change with the finish as I imagined.
The mud splatter must be great because the rear tire is fully exposed when viewed from behind, as shown in the photo.
I'm thinking of buying a slightly longer inner fender to deal with this.
The only slight disappointment was that the wiring of the license lamp was reversed in the Instruction Manual.
I also need to buy more Number base with Reflector.
View detail
Simple and sleek rear
If you install a fenderless kit than a basic rear-fender, it turns into a much sleeker back. It is difficult to install the Korean number plate right away, so processing work is needed. View detail
Also fits JC91
I didn't dislike OEMFender for a long time, but Custom lust inspired me to install it.
The length is not too short, not too long, and can be easily accessed by the key under the Tail Lamp.
Although it is compatible with JC79, it can be installed on JC91 without any modification.
The installation parts consist of three simple pieces. The installation is not as complicated as other companies' products, and is simple and clear. However, because it is made to be just the right size, you may feel for a moment that the size does not fit when installing it on the car body.:Pair (for Left and Right) If you fit it while spreading it out on the "Snap", it will fit comfortably with the Snap.
The long wiring that is difficult to deal with after assembly can be neatly accommodated by crawling along the RiderSeat side together with the harness on the Tandem seatLeft Side. The BlinkerCoupler, which is just exposed, can be protected with Sponge tape to prevent rattling noise.
This kit does not include a reflector, so a separate reflector kit is required. The Number base is thick enough to be used with a Reflector, but I don't think a separate License Frame is necessary. However, I use POSH's Horizontal Type Plate Holder which I used for OEM Fender, and I can install it without any problem.
Also, following the example of the Fender Eliminator, if you run in wet areas, you will get mud all over your back, so be careful of puddles and run on sunny days or you will need a Mud Guard.
Recommendation for installation if you want to highlight the trapezoidal ShortBody of the CB-RSeries.
I was debating whether to go with the Fender Eliminator until just before I bought it, but I thought I would just install it and remove it if I didn't like it, but I now like it very much.
View detail
Fender Eliminator Kit
The OEM Rear Fender was long and uncool, so I added a HURRICANE Fender Eliminator Kit to it, which made it refreshing and cooler! View detail
It's a great costumer
The ZX-14R's ungainly rear area will be refreshed. When installing, pay attention to the wiring and other things. I mistakenly cut off the ETC wiring. ('; Ω; `) 。
It is less expensive than otherManufacturers, but it requires a separate Reflector, so is it still the same in the end?
View detail
Worth the money
Excellent fender eliminator at the price you would expect for one. Yoshimura and almost all others are WAY overpriced for a piece of bent aluminum. This kit came with a high quality LED plate light AND the adapter for the stock harness, so no wire cutting. Don't buy any other eliminator if you only want to remove the big plastic Monkey tail. View detail
HURRICANE Fenderless Kit for Honda Monkey 125
About quality and texture - Top quality. Solid design with no vibration from the light weight aluminium. About the feeling of use - I couldn't be happier with this fender eliminator, the kit came with everything I needed and just looks great on the Monkey. Products to buy together - Hurricane have some great looking Monkey specific parts here on Webike and their chain cover would also be nice to add to get rid of the OEM plastic one. Difficulty of installation - I found the installation of this part easy. All very straight forward with only basic hand tools, the hardest part was disconnecting the OEM taillight plug. Cost performance and comparison with other products - Almost the cheapest fender eliminator kit available here on Webike and I can't see why you would need to pay anymore for another brand when this one is perfect. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - The tabs to mount the number plate will not be a direct fit for all countries, the distance between the hole centers is 11 cm. View detail
Simple is the best
These parts make my monkey look even better. Installation is also not difficult. The hole size doesn't match the license plate in Korea, so it needs some processing, but I'm very satisfied. View detail
Fender Reduction Kit
About quality and texture - Excellent quality, made from a nice thick aluminium and anodized for a nice durable finish. About the feeling of use - Really happy with the look of this fitted to the motorcycle, licence plate sits at the perfect angle. Products to buy together - Some nice licence plate bolts to complete the finish. Difficulty of installation - Easy to install but just a little time required to disassemble for the replacement fender, took me an hour to complete. Cost performance and comparison with other products - Comparing to the others available here on Webike, this is a complete kit and is priced in the medium range but you are getting a top quality product. About shipping and packaging - Purchased back when EMS shipping was available to Australia, the cost was cheap and arrive quick and safely. Any concerns, cautions, or advice when purchasing - If you want a small fender that retains more of the OEM look you will want one that reused the OEM plate light, SP Takegawa have one like that. View detail
The License Plate Light is Couplet-on.
If the product contents are small and the License Plate Light is a Couplet-on product and the price is cheap, Made by HURRICANE is the best choice.
The LED License Plate Light is a bit cheap, but the price is the price, so I can compromise.
Installation is also easy as it's basically just a Bolt & 4 Nuts with the OEM Blinker porting being a bit of a pain.
OEMFender removal is more of a hassle than installation.
View detail
Great quality and easy to install
Great quality product from Hurricane, the product is fit well with my Cb250r. It takes about an hour for me to install, consider easy by follow the instruction given. Looking cool and definitely better looking than the original tail! View detail
good
I am very satisfied with the HURRICANE soilless removal kit. It is easy to install and rich in accessories. It allows the removal of the cargo rack to make the rear line look better. The workmanship is good. Non-destructive installation. The license plate light is very bright and cost-effective. View detail