Reviews
It is a little regrettable.
Installation is easy due to the precision of the product.
However, the cord of the License lamp is halfway long and the attached Extension Cord is connected in a place where it is likely to be flooded.
I extended it with a solder and insulated it with a Shrinkable Tube.
The Others is a product I have no complaints about.
View detail
Discontinued?
This is a slightly different imprement from my impression of the product, but I hope it is helpful.
We inquired several times about the delivery date, but the response was that the delivery date was undecided.
I've been told that there is no stock or delivery date other than Webby's...
I had no choice but to buy a used one for the same price as a new one.
If you really want it, you might as well buy it when you see it.
I do Tandem only to the tiniest balls, but it is easier because they don't grab my body.
View detail
I would have been fine with OEMFender...
When I went through the OEM Fender to get a belt to fix the Seat bag, I found that the OEM Fender was plastic (not weak, but it would flex), so I decided to use the Fender Eliminator Kit, which was also inexpensive.
Probably the most difficult part of the installation is the removal of the OEMFender.
Instruction Manual does not have instructions for removing OEMFender.
However, if you are a do-it-yourselfer, you can remove the Rear Fender when you insert the ETCCard, so you may not have to do so much work (^^;)
The construction itself is solid, so the seat bag can be securely fastened to the belt.
I feel like it could be a little more behind the License Plate, but I am satisfied with the strength of the product.
View detail
On the GSR750
I chose this product because I like the clean Rear view. I like that it is not cluttered, but it may feel cheap to some people.
The process was easy and uneventful.
The LED Lamp is also beautiful, but the projection to attach the Lamp is a little too large.
If we drive long distances in the rain or on roads with floating dirt, our rear bags and backs will get dirty, but this is unavoidable.
The price is low and it is a good product!
View detail
It was cool!
So much so that I can only ride on sunny days.
Mud splatter will be worse, but w
Installation is also easy after reading the instructions.
View detail
I think it's a passing grade.
I think it would be easier if two people work together to install it on the car body. 30-liter GIVI was installed, but the bracket did not fit and the installation could not be done reliably. View detail
XSR700 Made by HURRICANEPillion Bar
I looked at a lot of carriers, but I wanted to avoid killing the TailDesign of the XSR700, so I ended up at Pillion Bar.
Installation was quite easy.
If you have tools that can be used for normal maintenance, you do not need anything special.
Personally, I would have given it a perfect score if it had a little less bounce.
There was a little gap between the Tail lamp and the Image.
View detail
Screwfor Hole
I didn't check it carefully, but it seems to be an M8 Screwfor Hole, not a product for filling a hole of M8Size. So the body is around M6 size.
It does not appear to fill the M8Size hole.
View detail
Mounted on Gsx250r
Mostly satisfactory Level. Dry rating, a little bit of the part to be fixed to fit the body of the car is a little Quantity.:Pair (for Left and Right) There was a Gap. It is not visible unless you look through it, and there is no problem installing it. It is not too difficult to install. Included Parts:I think it is a satisfactory Level. View detail
It would be nice to have a Type without Luster.
[How is it used?
TZr250R (3XV) I was concerned about the bare cap bolt on the Stem of the "Stem" so I bought it to put a lid on it.
I thought about using KITACOConvenienceParts, but I chose HURRICANE because it is a PRO around the handlebar and there were more of them.
Was the one you received as per Image?
1Quantity firmly as shown in the picture:It was 1 Set of 2pcs.
Was the installation difficult?
It can be installed in about 3 seconds as it just fits into the Bolt's head.
How was your experience with it?
As you can see in the photo, it is quite shiny, so it stands out a bit. (Lol)
Well, it can't be helped that it is probably intended for use in the bar Handlebar Post.
I'll try to get rid of the luster by easing it off a bit when I have time.
[Included Parts:were they on?
Cap only.
The bags are of a type that cannot be sealed, so it would be nice to have a Zip lock, etc. for storage.
[Was there anything that disappointed you?
Not really!
【Review】
It prevents Bolt from rusting and dirt from accumulating.
It is good for those who use it in such areas because of its gloss.
Also, since there are quite a few caps in the box, I will use them for cap bolt in places I am interested in.
View detail
Easy installation
Simply remove the OEM Chain Cover and install with the included Bolt to enhance the quality. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14)
Simple and good angles
Simple and easy to install. The angle is nice, but it can be bent in a vise for freedom.
I hope the price is a little lower since it is Simple.
View detail
It makes it easier to maneuver the vehicle.
I bought it because I thought it was necessary when I needed to maneuver the car around. It has helped me a lot when parking the car. On my vehicle, I was able to attach the OEM Tandem grips on both SIDES that were originally included. The holes are perfectly aligned and there were no problems. It is very convenient to be able to use the Hook with luggage on the Rear seat. As for the look, I wish it had the Chrome plating type. I think the rigidity is fine. It will be useful for a long time to come. View detail
It is quite good.
Without the tandem grip, there seems to be no place to hold the rear of the motorcycle, and it feels strange if it is not attached. When I used to ride a CB1100 without a tandem grip, there was no place to hold the right hand when I straddled the motorcycle and leaned back, so I installed a tandem grip afterwards. This time, I bought a BANDIT250VZ, which was a little bit expensive, but I bought it because there was no place to put my right hand when I was leaning back.
BANDIT250VZ is not a classical NAKED like CB1100, so it is not as cool as CB1100, but I personally feel it is a little better. The reason why I gave it a 4 is because I don't like the way it folds like a pentagon, and the original quantity of the pentagon was easy to install, but I think the pentagon is a little bit too big for my taste.:Pair (for Left and Right) The first thing that disappointed me was that I could not install the grips on top of each other. I think it might be possible to overlap the grips by lengthening the bolt and shaving off the part where the bolt hits a little, but I installed it in a hurry, so I was disappointed first of all. Original Quantity:Pair (for Left and Right) The Tandem grip is not designed to be used as a luggage strap, while the Grip has a rubber strap for attaching luggage to it.
But well, I'm glad it hasn't been discontinued yet.
View detail
I think it's good!
Purchased as a countermeasure against cold weather; without Screen, I was getting a decent amount of driving wind, but I have the impression that it has been reduced, so I think it is effective. View detail
No effect in Normal position
This Motorcycle OEMHandlebar Quantities to Upright:The upper body is set so that the upper body is in an upright Riding Position.
At this Visor height, the feeling of receiving wind is almost the same.
It would be effective to replace it with a Swallow or Condor Handle, though.
However, according to the manufacturer's website, it does not seem to be possible to attach the separate handle at the same time.
Even as a Meter visor, it is ineffective because the Meter is located far from the Headlight.
It seems that there are several Meter Brackets available from several companies that can be moved forward, so if you are doing such a Custom
I think it will be effective.
It doesn't sound like it says much good, but I like it because it looks better.
View detail
Fits: YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA Bolt
Compared to other companies.
I bought this one compared to the other company's product based on appearance alone, but I actually had to purchase the Reflector separately, which is a bit of a hassle.
However, the good thing about these parts is that, like the OEM, they cover the various wiring parts and completely hide them when viewed from the reverse side. This effect will not show up in a short period of time, but I think it is highly effective in protecting the wiring from waterproofing and damage caused by possible contact with the tires.
View detail
Fits: YAMAHA SR500, KAWASAKI ZEPHYR750 RS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ
fashion-conscious
I was concerned about the reflection of light on the Windshield, so I added it.
It also looks stylish.
Installation was extremely easy.
View detail
Fender Eliminator in HURRICANE
[How is it used?
The size is perfect to the point where the cover of the Normal blinker fits.
Easy to install and work with
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy to do if you have a Driver and Ratchet tool.
How was your experience with it?
Satisfied with Refreshing and Sharp around Fender as intended.
The material is aluminum and painted, so it looks simple but is solidly made.
[Included Parts:were they on?
with Exclusive Harness・Led License Lamp
[Was there anything that disappointed you?
When the Led License Lamp is installed, it comes into contact with the Stop-lamp, which causes vibration.
Concerns about LampCover cracking.
Items/Reflector that should be purchased together must be purchased and installed
View detail
Fits: YAMAHA SR500, KAWASAKI ZEPHYR750 RS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ
SR400 2014 FI
Great product despite a notice in Japanese and printed in black and white. Installation was quick and easy. Pay attention to the positioning of the clips which must be offset from the headlight. View detail