Reviews
Hole plugging!
Regardless, it is just a Bonsai Parts to fill the Screw hole!
But, well, I wanted to add some Blue color to it, so I went out and spent it....
View detail
Fits: YAMAHA SR500, KAWASAKI ZEPHYR750 RS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ
It makes you look pretty.
I think the price is reasonable and it is a good product for casual makeover. I think it looks cute.
Installation was a little difficult in positioning.
The drawback is that the LightBody of the car body gets small scratches at the installation pin if the positioning takes too much time and has to be redone.
Rather than putting it on and taking it off, it might be better to leave it on after putting it on.
View detail
Fits: KAWASAKI ER-6n, KAWASAKI NINJA400 (2014-), KAWASAKI Ninja 650
Fender Eliminator Kit
It arrived earlier than I expected, which was a big help. The instruction manual for installation is difficult to read … I thought it would be better to make it a little larger. I am very happy with the quality of the product and the price. View detail
When was the last time you dropped out of a replenishment?
I bought these caps because the caps on my Handlebar Clamp Bolt had fallen off before I knew it, and the price is great for a pack of 12. View detail
BALIUS2Pillion Bar
Installation was easy and looks great!
However, the Seat is difficult to close and the Seat interferes with the Bracket of the Pillion Bar, causing the Seat to tear.
View detail
I like the shape of Parenthesis, but...
I chose it because the shape is tapered and almost straight with Seat.
Those who install SeatBack have no problem.
However, if you use a packing string to tie it directly to the carriers, the carriers will be tapered, so they will not be able to be used as a packing string.
Even after tightening the Rubber, it escapes to the thin side.
There are also only two protrusions on which to hook the Rubber.
Needs a little hang to fix.
View detail
It is good.
It is good. View detail
You can't load heavy objects.
Installation is easy as it attaches to the top of the Pillion Bar.
Webig's product description says to remove the Pillion Bar, but it's wrong!
The official website also says to put it on top of the bar.
The mounting part is not very strong, so it wobbled when I put the top case on.
OEM Carrier is recommended if you want to load heavy items.
View detail
Interference with Down fender
I wanted to Refreshing Fork Guard.
I've installed it.
Down fender made by OVER.
Bracket interfered with …
I was able to install it, so we'll see how it goes for a while…
Be careful if you are using Down fender.
Well, there's no such thing as compatibility between parts.
I'll have to buy it to find out.
I like the look of it.
View detail
Doesn't JC91 fit the bill?
? The hammering on the car body is bad.
It is better to widen the mounting hole Pitch of Number base part.
Or, widen the hole in the Bracket part of the car body mounting
If there is no protrusion in the Inner cowl part, I think it will be attached normally.
I'm going to use a color boss to attach the bracket.
I felt the thickness was too thin.
Since Bracket and Cowl are directly against each other, I thought the thickness of the attached collar could be doubled.
? Price is cheap!!!
I like the design of the Fender Eliminator itself.
I especially like the length that comes out the rear of the vehicle, which is just right.
View detail
It's good, but it needs improvement.
This is a report on the Z900RS.
The texture is refreshing and good.
The hole to pass the wiring of the Blinker and License Plate Light is large, and water enters under the seat when driving in the rain, and ETCBody etc. become dirty.
View detail
It's just a plastic Cap.
It's just a plastic cap, like the title says.
It is probably the same model as the one included in the HURRICANE Pipe Handlebar KIT in Black.
This time I used it on a Bolt that was dyed black on Stainless Steel, but it was too tight!
I accidentally got a Wound on the butt of a Penetrating Minus.
View detail
HURRICANEFender Eliminator Kit&DAYTONALicense Plate
It was easy to install without any difficulty. The only thing is that the wiring of the License Plate Light is passed through the hole of the Plate, and although the wiring is protected, it is damaged by the corner immediately. I wrapped Tape around the Wiring and protected it, but I thought that I could be relieved if there was a Rubber Rubber in the hole which passes the Wiring. If you are considering purchasing this product, I think you should prepare something to protect the wiring.
I was satisfied with the shape as I expected.
I chose the one with Reflector by DAYTONA for the License Plate, but I had a sense of security because the Reflector had become a screw stopper.
View detail
Improved loadability and maneuverability
We wanted to improve the loadability and handling, so we looked for a Rear Carrier and chose the HURRICANE one based on the shape of the steps with the Rear Sets and its reputation for strength. View detail
Fits: HONDA VTR250, HONDA VTR TypeLD
It's nice
The loose rear view was Refreshing. I am satisfied with Large because it was easier to install than I expected.
Stop-lamp is also a nice, modern name for the LED.
View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA TRACER900, YAMAHA TRACER900
Cannot be used by those who wear the side case
Side case and Blinker interfere with each other, so you can't use it
(I put it on as a Large mod.)
If you don't use the Side case, I think it's a good thing it's cheap
View detail
The overall construction is simple and nice
When I checked each Parts to install it, the base of the License Plate Light The wiring on the part was peeling off and the wire inside was exposed, I can't roll the Tape Since there were only two holes, I repaired them with a Glue gun before installing them The accuracy of the mounting holes, etc. was able to be installed on Smooth without any problems It looks and feels good View detail
It looks good
User vehicle inspection failed due to light leakage from the license plate light, Touch pan I painted it and it passed I could see the white LED from right behind View detail
Mismatched hardware and a little too small
It doesn't come with the black hardware like it shows in the pictures. It comes with the silver stuff in the first picture. The assembly instructions are completely in Japanese and the pictures show different hardware than you're given, so it's a little confusing to install. You have to use one of the bolts that already in the bike (black with a rounded head) and one of the silver bolts they give you with a big cylindrical head. Honestly it looks pretty dumb with mismatched hardware, but no one will notice unless they already know its there (and you will know its there). I ended up going to home depot and buying some matching bolts and spray painting them black. Also, it doesn't come with the two rubber bumpers shown in the pictures and instructions, but it seems pretty rock solid so I'm not too worried about that. Besides the hardware, it's a little smaller than I'd like. I was hoping I could lock my helmet to it and rest it on top, but it's too small to hold my helmet. However, throw a bungee on it and it's great for bringing home some food. View detail
good
Worn on New Year 16-year Grom.
Because the new model has protrusions in the ass, this product which is not empty is not ordinarily attached, but it will be managed by processing.
Marking the protrusions, drill a standard hole with Drill and Cut to square in the Grinder, the position of the mounting hole does not change at all and it will be attached properly.
Work time including Cut is about 30 minutes.
It is somewhat troublesome to have a hole to escape the electrical system, but it is somewhat troublesome, but if you are used to DIY and have a tool, it is possible to make it cheaper than the new type Fender Eliminator, so it is Recommendation for those who can do it.
View detail