Reviews
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
Good quality but high price compared to other companies' products
[How is it used?
Purchased to install Smartphone Holder.
Was the one you received as per Image?
It was just like Image.
Thanks to the comments on the app about compatible models and your impressions, I was able to install the Image as it was before I bought it.
How was your experience with it?
It looks like it can be attached to more than just the Smartphone Holder, so we plan to add an ETCCard and a Drink Holder.
[Points to note]
Check the conformity of the WeBig application, and check the dimensions if the Handlebar is narrowed down.
Needless to say, if the length is set to the Limit, it will interfere with the Master Cylinder, etc., so be sure to confirm the length in advance.
View detail
Fits: HONDA FORZAX/Z(MF08/10) PS250, SUZUKI SKYWAVEtypeS/M(CJ/CK44A CJ45A/46A), YAMAHA MAXAM_MAJESTYC, Others for Φ7/8-Inches Handlebar
Surprisingly effective.
I happened to use it before on an XG250 TRICKER.
I had put it in storage after replacing the Handlebar on my XG250 TRICKER, but I was concerned about the distortion and restlessness of the OEM Handlebar Up Type on my Z125PRO, which I believe is for the Z.
I wondered if I could reuse these parts, which are essential for off-road vehicles, and installed them.
Installation is also easy, as it is simply fixed horizontally to the point where there is no play.
After installation, the handlebar unexpectedly or surprisingly calmed down considerably and improved maneuverability.
Negative sensation also increases the Direct feeling on the road surface, so if you are nervous, you may be bothered by the vibration, I found it easier to ride with less firmness and unnecessary movement of Steering.
By the way, recently, many people seem to be attaching it for fixing Camera and Smartphone.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA CB1100 EX
It is beautifully made.
Recommended for customization around Handlebar!
Makes for a gorgeous Handlebar surround!
It's solidly structured and built, and has a high-end feel to it!
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
I put it on my NC750S.
I had 5InchNavigation directly attached to the Handlebar, but decided to install this product when I replaced it with 7InchNavigation. I thought it would be a little bit in the way because the parking brake is located on the left side of the handlebar, but I was able to install the Limit.
7InchNavigation and a smart phone are attached to this Brace. 。 Large Navigation is now easier to see because it can be attached straight instead of at an angle. 。 Size is "S" 255mm.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
convenient in many ways
The price is a little high, but it is very convenient to be able to attach various things to Handlebar.
It looks beautiful and is a solid product.
It was easy to install
View detail
Extra thick!
I was looking for a Handlebar Brace to fix my phone on my VFR800XCROSSRUNNER 125 and I chose this one which can be used with the thick Pipe handle.
When running at a certain speed, it picks up the Gap of the road surface and the vibration is quite large, so I decided to make it as thick and firm as possible.
The result was perfection, the Klikka Phone Mount that I was using worked well, the vibration was not Large, and it was stable.
I felt that it was a little expensive, but it looks like it can be used for a long time, so good!
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
Scooter for commuting
I installed it after I replaced it with the HURRICANEHandlebar Kit. It looks much better. View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
Extra thick and not bad looking.
I was wondering if the length would fit, but I was able to install it with the SS Size, and since the Handlebar is black, I think it fits well with all black. View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
It's more than a utility bar
It's my intention to make the Handlebar area as simple as possible, but it seems to be the case that the Grom's The thin iron Pipe is not encouraging and looks shabby; it's a Large standing bar I'm also somewhat worried about the strength In fact, when I pick up the Gap while HardCornering, it is a little bit shaky I thought about replacing the Handlebar, especially to make it aluminum (a little more forward leaning) I don't have a suitable one (and it's easier to ride), though I'm worried about the strength if I don't make it a fat bar Clamp has to be changed, and I'm worried about handling Hose and Cable, so much for that I don't want to do it As far as I'm concerned, as long as it has the necessary strength, it doesn't matter if it's iron or not So, what do you think of this kind of Handlebar Brace? I've always thought it was a standard reinforcement method for Off cars
But, according to my trusted motorcycle shop, the It's just for decoration, you know, because a lot of people wear their phones and stuff Well, do it with a USB power supply, smartphone holder, etc I don't want to Of course I don't need ETC, and I don't want to use RAM-MOUNT's clamp type (not resident) It's very easy to use, and Navigation is rarely used Since you won't need it, you can only clamp to the Handlebar when you really need it, and You can only use the Smartphone Holder for that time Then, when I shoot driving videos with my GoPro, I like to have a place to clamp it There is also a method of clamping directly to the Handlebar, but the angle is quite high So it is somewhat difficult to adjust the position
So...I decided to put this Handlebar Brace on First of all, I only expected it to be an utility bar. 22mm thick type I didn't want to make it stronger or anything, but simply because it's the same thickness as the Handlebar The RAMClamp is easy to install
As a result, the parts that arrived were extremely heavy It's actually very heavy It's very difficult to adjust the angle of the clamps Clamps are not in between, so I have to loosen up Perfect rigid mount with 4 screws After fixing the bar, the position of Lever was returned
So when I ran after installing it, I was pleasantly surprised by the miscalculation As I mentioned above, I wasn't expecting it to function as a Handlebar Brace at all The feel has changed properly First of all, the vibration is reduced There may be an effect of the vibration absorbing Hand guard that I just installed the other day It's even less And yet, it feels like you're touching something extremely hard, and the front area is even more relaxed It was Example Brrrr There is no face White, I deliberately picked up the Gap with the front wheel many times, but I went over the stoner and It is
At best, it's nimble and at worst, restless, which is the fate of the front and rear 12-inches groms Front in particular is vulnerable to disturbances, and when you step on the Gap in the middle of Corner, it's quite unpleasant! It got better Of course, the Stem Stabilizer from OUTEX, which has already been addressed, and KOOD's Thanks to the ChromolyShaft, Front was already better for Large I'm not satisfied yet, and I've already decided to change Spring and Fork oil Parts have been ordered Brake will be strengthened in the future So, considering that the load on the Front will become even more The Handlebar Brace feels reassuring
At first, I only intended to add a utility bar, so it was a nice miscalculation Ta I mean, the product is properly named Handlebar Brace! So I think it will meet the expectations in that direction as well If it were just about strength, though, I think the thin one would be enough
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
I think it has excellent performance, looks and cost performance
The purpose of purchasing the Handlebar Brace was to get a dress-up and a handlebar surround It was for the installation of Mobile phone and others
The first purpose of the Dress-up is as plain as I aimed to be when I saw it installed in person (lol)
I wanted to create a tighter look by using Black in the various color products sold on the market was good
I think that this product itself is simple and is a good product However, if it is possible, please make the Cap screw of the attachment also Black to match the color of the body I wanted it ← Is it too plain? (Laughs)
It's a length, but at 240mm in SSSize, I think it's just right for me
The next step is to increase the rigidity of the car when it is entering the corner and while cornering The vehicle body will not be stable when adjusting it, but the handlebar area, front fork We thought it would be better if we increased the rigidity
There are several parts to increase the rigidity of the front area, but this time we will use the Handlebar I chose the Brace After I installed the Brace, I took it for a test run on a short mountain road that I often drive on, but it was pretty good So-so? It came to be able to trace the Line as I thought To become able to be able to do Cornering comfortably, there is still more to be done including the skill
Regarding the installation of the last Mobile phone etc., it is Mobile I haven't received my phoneHolder, so I haven't been able to try Mobile phone I installed a WearLOVE Le Camera (GoPro) But I didn't want to use it because the visibility of the meter would be compromised & the Camera position would be too high
These are the ratings for Large bodies
I'd like to add a review if I find out any other details
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
It is in use with W800 after replacing EZ-FIT-Bar
EZ-FIT-Bar (For GSX 1400) It is in use at
I was worried about the Handlebar Brace from another company, but the beauty of Plating made me think about it I chose HURRICANE
The above EZ-FIT-Bar is Exactly 255mm size
What did I think of the installation? It's not very good It's not very good, I feel like it's far from the classical images of old cars I think it's a very good product But the product itself is good quality and good in my personal opinion
But it's Neck that's a bit expensive
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
You're glowing
A painful work scooter, SEA BASSCJ42A, which I installed in my 17th year of redecorating I got the HURRICANEHandlebar from We-Big and the Touring? Quantity:It is Pair The recommendation is MSize, but it seems to interfere with Brake master This time I used SSize255? I was troubled a lot I selected and erased and selected and erased View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
I am satisfied
It has enough texture and feel
If it was a little cheaper at this quality, I would be Large satisfied with it!
The vibration of the Handlebar was suppressed and the rigidity of the Handlebar was improved I haven't noticed any changes, but I haven't noticed them because I can only run them in a humble way It may be that
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
handle bar brace s size
my bike honda ps250 im bought handle bar brace s size blue very well fitable my bike ps250 able bar brace m size but s size is better View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Handlebar's Small object mounting space increases
I wear SizeSS on CB 1300. Since it is the same thickness as Handlebar, Navigation and various Small objects installation Space will increase at a stretch, CB 1300 think that it is exact Size in SS. Helmet with Hel lock to prevent burglar is also perfect if you have Brace. Because it is Screw stop, there is no change in rigidity of Handlebar, it is a good feeling.
Although a gap can be delicately formed with Handlebar, is it such a thing?
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
my scooter 2006 honda ps250 ps250 handlebar is long. forza 250 and ps250 handlebar is length different webike recommand HURRICANE Handlebar Brace size SS for ps250 i dont agree. SS size is ps250 handlebar not fit very short
my scooter 2006 honda ps250 ps250 handlebar is long. forza 250 and ps250 handlebar is length different webike recommand HURRICANE Handlebar Brace size SS for ps250 i dont agree. SS size is ps250 handlebar not fit very short but M size fit almost right. i think 10mm long PS250 fit HURRICANE Handlebar Brace size is S or M FORZA250 fit HURRICANE Handlebar Brace SS because ps250 handlebar is more long View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
The Handle brace has purchased for every Motorcycle purchase.since the Handle pipe was black this time [ ], the Brace also purchased black however, it is the paint application which black is thick in ordinary paints and it feels a little cheap -- if i
The Handle brace has purchased for every Motorcycle purchase.since the Handle pipe was black this time [
], the Brace also purchased black however, it is the paint application which black is thick in ordinary paints and it feels a little cheap -- if it can do and complications object paint application is used, it is the still better touch.
Goods are the Designs which suit liking slenderly.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
The position was decided, and the thin Sponge sheet was attached to Pipe sidewall in tension about 10 minutes so that a crack might not be attached to a Handle. Since it is the Plating, it adapts itself to the surroundings and is the pure style.
The position was decided, and the thin Sponge sheet was attached to Pipe sidewall in
tension about 10 minutes so that a crack might not be attached to a Handle.
Since it is the
Plating, it adapts itself to the surroundings and is the pure style.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
It is satisfied. Although M was purchased, a little longer fellow could be sufficient after . Although it was in etc. partly, no other fellows whose attachment is cheap so far at an integral type are thought of as if there were. It interferes
It is satisfied.
Although M was purchased, a little longer fellow could be sufficient after
.
Although it was in
etc. partly, no other fellows whose attachment is cheap so far at an integral type are thought of as if there were.
It interferes in a Brake or other Cables a little [
].
Also by
, once, since it was possible, it equipped with attachment as it was!
View detail
Attach to one Inch handle, it Blurs, and vibration reduces. Since the center of a Brace is 22.2 mm and it can attach the Clamp of 22.2 Millimeters size, it is saved again.
Attach to one Inch handle, it
Blurs, and vibration reduces.
Since the center of a Brace is 22.2 mm and it can attach the Clamp of
22.2 Millimeters size, it is saved again.
View detail