Reviews
Good.
Easier and better rearward visibility. View detail
I'm glad it's rust resistant!
I used it to replace Mirror on an AddressV125 that a friend gave me! It works normally!
It would be nice if the design was a little more unique or better made!
View detail
Savior in times of trouble
I purchased this product because of the lack of adjustability after replacing the Handlebar&Mirror.
There is no problem in terms of quality, but it looks like it was made by welding Bolt/Nut, and I would like to see a clean look like Cut-out.
The lack of the desired Mirror adjustment range has been resolved, so there is no problem in terms of functionality.
View detail
A little further out.
I changed from OEMMirror to an external short one and it became a little difficult to see
I found this one and put it on to see if it would be a little more outside.
It's only a small difference, but I can see better now.
View detail
It might not look good on the OEM Mirror, which has a thicker root in recent years.
I bought this product, which is the only corrective part, because the angle of the Mirror Holder became bad due to the Custom, and I couldn't see the rearward vision in the adjustment range of the Mirror.
I used to use the OEM Mirror for the ZRX1200R, but the thicker base made this Adapter look less balanced.
Since the Mirror was replaced, we rejected it this time.
It does not correspond to Japanese Vehicle Inspection.
This may be the only HURRICANE Parts for Mirror, but it was a product not carried by the local Naps.
View detail
This is not it
I wanted to pretend a bit of hangSR 400, which I have gotten for 30 years, to myself a bit, but now it has been replaced by the small type Mirror of Round Type.
However, visibility is bad.
So, I looked around and reached this product.
Everyone says that the price is high, but this processing is probably manual. Welding is difficult, is not it.
Visibility is properly improved with this kind of Bimmy angle, it looks like it is not bad at all, I will evaluate it.
View detail
It rusted to me.
The inside was rusty.
I bought 10 millimeters of Mirror at the same time as 8 millimeters of car body and it was also rusty so I wonder what kind of Meter it is.
View detail
Mirror in sight even if looking forward
There is a car that makes an unreasonable overtake while riding in the flow of the roadway, I felt the danger.
If you know in advance you can respond with confidence, but the CUB's boarding posture is high,
Since Mirror is not in sight, it is rare to notice the following car reflected on Mirror with the forward line of sight.
With this product 10 cm and Windshield base 4 cm,
When Mirror position is raised 14 cm, it is now possible to capture the backward in the corner of the field of view with the forward line of sight.
Also, the action of seeing Mirror became possible only by eye movement without moving the neck.
It has definitely diminished the ability to follow the next car.
View detail
Visibility improved and satisfied
I am satisfied with better visibility.
To illustrate It is sold by piece. Because I did not write it I ordered only one.
If you order another one, it costs a shipping cost and it becomes a high thing, Quantity : Pair (for Left and Right) It is hard to use the things with different heights, the worst.
I'd like to order together when ordering something. Until then, I'm tolerant at the height that I can not see until now.
View detail
It is necessary for safety and white by tracking measures!
Please install it on a vehicle with a low Mirror position.
Since the position of Mirror rises by 10 cm, visibility improves and it is the best product for safe driving. * It will be easy to notice even in the tracking by White by.
Compared to Mirror's male Screw's length, the product's male Screw's length is slightly shorter. If it is 3 millimeters more, it is a 5 star..
View detail
Good
I bought it to install Stealth Mirror.
I think that it was good even if there was a little more angle.
The most dissatisfied point is the price.
With Adapter and Quantity : 2pc. I think that there is a degree in reverse price destruction of 2720 yen to buy Set.
View detail
It uses for the external Handle by the Napoleon Lute mirror. Barely, although it was a right-hand side field of view which is a grade which can be seen a few, it became the width of the field of view to the extent that he thinks that it is more than pure
It uses for the external Handle by the Napoleon Lute mirror.
Barely, although it was a right-hand side field of view which is a grade which can be seen a few, it became the width of the field of view to the extent that he thinks that it is more than pure by attaching this Adapters at the
beginning.
However, the price is high.
It is not entering
two piece, and becomes nominal cost containing one piece of 1470 yen.
I think that it can be coped with here when it is hard to see a favorite Mirror not to change.
View detail
It is high! When placing an order with two intentions, only one piece arrived but he was surprised at the height of a price. Although it is my responsibility of which it was convinced whether see only a price and to be a right-and-left Set .. If you mere
It is high! When placing an order with two intentions, only one piece arrived but he was surprised at the height of a price.
Although it is my responsibility of which it was convinced whether see only a price and to be a right-and-left Set .. If you merely see only a photograph, what will not understand how many pieces an order for can be placed, but I will also think unkind kana just for a moment.
Since he buys the right-and-left Set of a cheap Mirror if two of these are cut, those who have a prejudice in a Mirror had better buy it.
View detail
"When a handle angle was changed, in order that a mirror reflects only a ground surface, I purchased. About the angle, although it was satisfactory, it was hard to attach as the angle turns round and round. Since the fixed method is a double nut, two span
"When a handle angle was changed, in order that a mirror reflects only a ground surface, I purchased. About the angle, although it was satisfactory, it was hard to attach as the angle turns round and round. Since the fixed method is a double nut, two spanners may be needed. As goods, it is not too bad nor not too good." View detail