Reviews
CB250RHandlebar replacement essentials.
CB250R with HURRICANE's BMConti3 type
I purchased this product for installation.
28.In order to get the OEM of 6Φ to 22.2Φ.
Spacer collar is required.
Mounting is only A little on the outer side of the semicircle
Double-sided tape was applied to fasten the gap.
If you don't do this, you will always be in the Best position.
Color cannot be inserted.
Well, that's because it's mostly hidden.
It is not built to be so Beauty.
If I get the chance, I may replace it with something a little better built.
View detail
M12 M10 conversion
Used for converting M12 to M10. View detail
Black says Nut is Black too.
I'm using it now with Eliminator for phone mounting.
Bar clamp for mounting on Mirror, Quantity:Pair (for Left and Right) It is for 22mm that can be used for both.
I bought Black, but Nut was still Silver, so I painted it Black and used it.
View detail
Fits: KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
Good for fine tuning the Handle position.
The product name is "Handle holder spacer", but it is not famous and I couldn't find it on the web.
Webi doesn't come up unless you type in the product name. ・・・・
I was able to find it in a jungle where I could also find related products, so I just snapped it up, and I'm sorry I didn't buy it here.
I installed it on my Posh face Super Motorcycle Position Bracket, and it fit the Cinderella so well that I thought it was made at the same factory.
The adjustment fee is only 10mm, but this 10mm will expand the custom range around the Handlebar.
I used it myself to avoid interference.
If you are using the Handlebar Holder, you may want to use it to fine tune the position.
View detail
You can use this.
In the case of XSR700, because the brace cannot be installed in the OEMHandlebar due to the position of the meter
I bought this Clamp Bar.
Now the Navigation is in place.
It's not the product's fault, but it's just a pain in the ass to insert and remove the keys.
It's even harder to do. (We knew that...)
View detail
Good vibes
I bought it to install my Smartphone Holder. The thickness of the board allows for a very secure installation. View detail
I had no trouble installing it.
Installation of Ninja250Rni. When Mount is attached, it is not the degree which becomes matter of concern, although it diverges and is connected from Wiring of Tail lamp, and it mounted in the place of Mirror. View detail
Scooters need it.
I bought it to install the Smartphone Holder.
It's easy to use because it's only necessary to bite the Mirror hall together.
I think there are other uses for it, so it's a good cosmetic.
View detail
Convenient
I wanted to have an Navigation unit for Scooter too, so I installed it on Scooter It is very convenient to install it on the Mirror View detail
Groundbreaking Digimono Mount Bar
Built in USB power supply to the Mount bar bar on your phone etc.!
Groundbreaking Digimono Mount Bar
Good points?:WiringRefreshing!
The best thing about it is that it is SMART to install, which is the advantage of the largest
Because the USB socket is directly embedded in the Mount bar body, it looks at first glance like just a The bar There is a USB Socket embedded in the back end of the bar, which can be powered from it
In order to minimize the distance between the phone and the USB Socket, the distance between the phone and the USB Socket is generally about 10cm to 15cm All you need is a cable Even if you use it while charging, the Handlebar area is Refreshing, so it is very convenient to use it SMART
Good point? Longer Power Supply Cable with Fuse
The Power Supply Cable that comes with it is long
The battery is installed in the Scooter, but it is located deep underneath Moreover, the Fuse box that I took the power supply from this time is located in the back of the battery To be honest, I was not sure if the battery would be delivered, but my fears were unfounded
Pass from the Handlebar part through the Upper Cowl and avoid the Stem part (this is a simple part) Wiring in the Cowl at your feet (there is a distance to). take the + power from Emon's Fuse I installed the kit and fed it from there, and it was totally comfortable in terms of length
There is also a separate Fuse for this Mount bar with USB power supply from the start When you shorten it by any chance, you can get USB power before the Fuse of the body side Because the Fuse of the supply is designed to fly, it can break by winding up the body of the vehicle There is no In an emergency, this guy is the only one who will die
Unpleasant point:The durability of the Cap is..
As shown on the product page, it has a Cap so that you can close the lid when you are not using it However, the durability of this cap is remarkably bad
As soon as I put it on, one of my fingernails broke off and now it has gone somewhere else For the sake of Waterproof, the durability of this Cap part should be improved Yes
View detail
Well done, sir
Used to bar handle the GSR250 If you look at the unit price High But I did not think of any other way and bought it But as a result of the I'm glad I bought it The construction of this model is as good as it gets The construction of the HURRICANEQuality, the Post and the Handlebar are all I got them in HURRICANE, and I've been standing up and mucking around twice, but I didn't freak out View detail
Expected
In the direction of Bracket, it is better to be able to Offset both up, down, Right and Left
Because it is for attaching Cigar socket, I attached it to the downward RightOffset
It was definitely fixed even though it hit Limit, or Handlebar Cover
Both Bracket and Fixing Screw of the bar have a firm rigidity feeling, and in this case it seems that fixing of Navigation is not dissatisfied with Firmly
However, there are things sold at about 900 yen by Brands I do not know well
I think whether it is subtle whether the difference with them can be clearly found or not
If it is about 1500 yen, it will be a satisfying shopping including COSPA
View detail
Normal good!
Owned Motorcycle is attached from Mirror hall for Separate handle.
Because Bracket is also thick, it is safe even in Motorcycle which is rugged and vibrates a lot.
It is useful because it can be attached to Flexible to a certain extent.
So far, I'm not complaining..
View detail
Fits: KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
Although the pure Handle was exchanged, when something misses something, this product is found and it purchases instantly! It became very much good touch.Although it attaches also to a pure Mount and is OK, a Long bolt also recommends purchase.
Although the pure Handle was exchanged, when something misses something, this product is found and it purchases instantly!
It became very much good touch.Although it attaches also to a pure Mount and is OK, a Long bolt also recommends purchase.
View detail
Fits: HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW PHANTOM750, HONDA VT1100, HONDA VRX400 R100 ROADSTER, HONDA MAGNA750, HONDA MAGNA750, HONDA STEED600, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400
Although it is used for years, it is satisfactory at all. Although it is the components of the category which can be made on one's own easily, since it is not high to there, I purchase and have not thought having lost.
Although it is used for years, it is satisfactory at all.
Although it is the components of the category which can be made on one's own easily, since it is not high to there, I purchase and have not thought having lost.
View detail
It was used for bar handle-ization of VTR1000F. Although top bridges could be exchanged, simultaneously with reduction in cost, it thought return to origin immediately, and used this under bracket. Before attachment, it seems that it is satisfacto
It was used for bar handle-ization of VTR1000F.
Although top bridges could be exchanged, simultaneously with reduction in cost, it thought return to origin immediately, and used this under bracket.
Before attachment, it seems that it is satisfactory for the moment although direction of the handle at the time of reinforcement and setting etc. became anxious, and it has fallen several times.
View detail