Reviews
I don't like the Round Type Mirror on the 2024GROM.
I purchased this product because I could not get used to the design of GROM's Round Type Mirror, which was apparently a reuse of the for MONKEY mirror.
I chose "Made by HURRICANE" because I thought it was better than the inferior "Large Land" products. The installation is not so difficult, but there is no instruction manual, and the package is not printed, so inexperienced users may have some trouble!
The design is good, but the Mirror angle has a small vertical adjustment range and requires fine adjustment at the Lever mounting point.
Somewhat disappointing in terms of product
View detail
Bar End
It must be cheap, but this is how it is. View detail
If it is a bit cheaper
It is a must have product to replace a different handlebar diameter, but a lower price tag would be better.
Also, if you could include a thin double-sided tape, it would make positioning easier.
View detail
It was a little long.
Changed to Long cable due to change to Handlebar Up Type. It is a little long, but there is no problem in use. Conversely, the Handlebar can still be raised.
Installation was troublesome with the carburetor part.
View detail
Convenient.
I was looking for it because I got bent out of shape standing up.
Separate handle category only by car model, and not in the Separate handle supplemental parts category.
If it only appears in the Handlebar category, it won't be found.
in a hurry
According to HURRICANE officials, the effective length of the handlebar differs for each car model.
CBR250R that turned. (MC41) Effective length 205mm for
The one I bought this time is the Universal one from for Repair, 217mm.
The former is a bit helpful because the Handlebar length is quite short and the Switch box was also Limit.
Incidentally, I asked HURRICANE officially if there was anything longer than this, and they said this is the longest.
I would like to see the information properly posted by car model if possible, though.
It's not so friendly, though, because it's often out of stock, and the model number is not listed in the official HURRICANE website, and it's hard to find the official HURRICANE website in the first place,
The angle can be easily adjusted, the holder is strong, and as long as you have the holder, you can use it in any way you want.
View detail
I'm glad it's rust resistant!
I used it to replace Mirror on an AddressV125 that a friend gave me! It works normally!
It would be nice if the design was a little more unique or better made!
View detail
Fits: HONDA APE 100, HONDA GB250 CLUBMAN, HONDA APE 50, HONDA APE 50, SUZUKI GRASS TRACKER Big Boy, YAMAHA SR500, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E, SUZUKI GRASS TRACKER, Others , YAMAHA SR400, HONDA MONKEY, YAMAHA TW200, HONDA FTR223, HONDA FTR223
Caution when installing
It is an inexpensive product, and since it is made by a long-established manufacturer, there should be no problem with the quality of the handlebar.
Two requests for improvement.
(1) The paint is too soft and just a slight touch will cause wounds. (2) Extreme care must be taken when installing this product.
I would like the center mark to be engraved instead of Sticker, because Sticker is too hard and peels off easily.
View detail
ticklish
When installed on a W650 external Handlebar, it feels like it has gone from brung to PullPull.
My wrists felt slightly ticklish throughout.
Better than painful, but I have some concern about what happens to people when this tickle builds up over long distances.
View detail
Necessity for Handlebar replacement!
[How is it used?
Street Riding and Touring
I purchased this product because the OEMWire is no longer available due to the replacement of the Handlebar.
Used for FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Wire needs to be removed and adjusted. If you are familiar with maintenance, this will not be a problem.
How was your experience with it?
Accuracy and quality on par with OEM. The outer membrane is soft and easy to handle.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
None
Other items that would be helpful
important point
Please choose the corresponding Wire for your car model.
Opinions and requests to Manufacturer
I would like the length of the external membrane and Wire to be listed for each.
View detail
In truth, it may be royal to ride as Original….
I bought it to change the position. The actual difference is slight (3cm up, 3cm back, width −6cm), but the feeling has changed a lot. It had been half a year since delivery and I was just getting used to the lower position, but now that it is a little higher and in front of me, the pain in my palm from over 50 km has lessened.
I don't think the appearance has changed that much. I originally liked the cafe's style, so I was glad that the design did not change. It's subjective, but ….
I know, but I personally prefer the Matte Black color, which is the same as the OEM, because the color is shiny and shiny paint. (I guess I just don't know about them …)
Note - I purchased a part to widen the width, but it is undeniably ugly, as it would require structural modification.
Incidentally, when we asked the labor charge for bringing in the parts to our neighbor's shop, they told us that it would be 17,600 yen if the clutch wire is replaced (this is a telephone inquiry, so please keep it as a reference). (This is a telephone inquiry, so please keep it as a reference only.) I tried to do it by myself, but it took a long time because I am not used to it. I recommend that amateurs ask a motorcycle shop to do it.
Conclusion - I was accustomed to a low Position, so my impression is that it is just a taste change, but I think it fits the Japan human body type.
View detail
Is it no wonder it bends so easily….
I am using it on a HRC Grom jc92 and the Switch box interferes with the Shroud unless I add a Handlebar Stopper.
I use the 4th one because I prefer the Position I get with the Handlebar in Kochira. The reason why I use the fourth one is that it bends easily even after a light fall during a practice run. It would be nice to have a little more strength.
Well, I'm just saying, as long as you don't mock it up (laughs).
View detail
I would like to see an assortment in 5 cm increments.
Purchased to change the OEM Handlebar of a MONKEY125 to a Handlebar Up Type.
I bought a 200Millimeter long, but I really wanted a 150mm longer one.
No complaints about the feel of the product. 。 Sliding was good even without going through Oil.
View detail
subtle
No quality problems.
I think we have different tastes.
I have the Position set so far forward that it looks a bit Mischief, but this would be closer to my best preference if the Edge angle were just a bit shallower.
The wires are thinner than OEM, so they require additional parts, but only the clutch wire needs to be replaced. The rest was OK with OEM.
View detail
It was short
I found this item, new and unused with exterior pain, at a used Parts store and purchased it.
I tried to put it on a WR250X that I replaced with a Taper Handlebar, but it was too short for SSize.
I use only Clamp and use Shaft as POSH.
I did not feel any vibration reduction.
View detail
HURRICANEClutch Cable
Clutch Cable was cut off.
I tried to buy OEM Product!
HURRICANE's Clutch Cable is less expensive.
I bought it instantly!
It's a safe Manufacturer, so it's a Recommendation!
View detail
5 month wait
The wait from order to delivery is approximately 5 months.
In SNS, etc., I think it is quite good, with the Position in between NORMAL and Separate handle, with inverse attachment.
I would like to install and review the product as soon as it arrives.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA HORNET250, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, Others
Stable Made by HURRICANE
Purchased to change the Position of gsrj.
I bought it because I could see detailed dimensions in the drawings.
As a result, after installation, it didn't fit me and I had to replace it.
They are sturdy and come in a variety of types.
This is a product that can be recommenedation if the position is right.
View detail
I bought the same one as before.
Quantity when the Handlebar was previously replaced.:Longer Clutch Cable that came as a set.
I don't have much to say in detail because I just purchased the same product in Single Item, but it helped me because the Clutch, which was very stiff, became very light.
View detail
Thailandco is small?
Screw accuracy, overall texture, and inner wire slippage are good 。 I used Wire oil, but I think it works fine as is.
However, the Thailand plug at the end of the wire on the grip side seems to be a little smaller than the OEM Product, and the drum attached to the Throttle cone turns easily (arrow in the photo). The other Thailand cone is also a little smaller than the Throttle cone hole.
The Throttle body side (closer to the Engine) seems to stay in place without rotating.
I'm assuming that it won't take as much force as the Clutch Wire, but I'm a little concerned that it really won't do any real harm.
View detail
Feelings Up
The Handlebar is only slightly raised, and it is made well by the Normal hose or the reachable Limit line.
Position is only a slight change, so you will soon get used to it.
When I looked at the handlebar area when I was riding, it looked kind of uncool, so I removed it from the inside.
I think it is a good product with a high degree of accuracy.
View detail