Reviews
It's not cosmetic, but I can recommend it to those who are obsessed with it.
I wanted to use a Fender Eliminator, but was looking for a product that would allow me to use an OEM inner fender for waterproofing near the battery box, etc., and came across this product.
But in the product information When installing the Japan License Plate, some modifications are required. As it is written, the mounting hole Pitch of Japan's License plate (120mm) The product did not conform to the
These and others are recommended for those who are comfortable with the additional processing of Inner fender's Cut and Bracket.
The car is legal and can be inspected without any problem.
・ "Daytona" Rear Blinker Bracket (For M8) _Item No.:23289
・ POSH." LED License lamp kit_Item number:500494
・ PLOT." Camera Bracket for Dora Recorder_Item No.:DRS001
・ "Daytona" High Cider Blinker PLOTn TWO_Item number:17308
The accuracy of cutting parts is good.
There is no problem with Fitting if the inner fender is processed according to the official YouTube video.
However, the license lamp and the Fender mentioned above interfere with each other, so we adjusted the mounting position by inserting the Spacer about 7mm. If I use the same TST license lamp, I am sure there will be no problem.
Although I had to buy a few more spacers and screws due to fitting with other parts, I was satisfied with the result.
View detail
I love that it's got all kinds of designs in it!
I like TSTLarge.
All of my motorcycles are TSTTails.
View detail
Gorgeous！
I had quite a bit of trouble ordering them Make it just dress-up parts and expensive! You want to go that far with Grom? But We-Big's Campaign pushed back, and to my surprise, I popped it in a minute before the deadline!
This product is made in the US by TST Initially, we were told that it would take a month to order it, and since there's a Large confusion about the Corona virus Am I going to be late? I thought it would be a good idea, but it ended up arriving in 2 and a half weeks earlier than planned for Large It's a good thing that they're not too far away from a decent motorcycle shop But it's not as if there is no such a thing as a It's amazing that you can buy products from a company that doesn't have a presence in the market It's very convenient
When I opened the box, which was still sealed by DHL Seal, I found the product and the wafer wrapped in a messy packing material Only Big's slips were in there, no Manual Well, I don't need it Installation is easy, and TST provides a careful installation instruction video (I what (I've looked at it twice) I pulled the contents out of the packaging and oh! What a LusterLuster, Shiningly! Carbon rear fender for the Grom, there are several similar products available and they are made The products from in Thailand are a bit cheaper, but I'm a bit worried about the quality This TST product is made of Toray's Carbon fiber I chose this one because it's a very good quality The cleanliness, the goodness of the parenthesis, and the accuracy of the processing was as expected I don't know if you can see it in the photo, but it's a very wide plain weave, and it's just as good as you'd expect it to be Carbon Fibre pattern (not the pattern, but the real thing!) This is the first time for me to make a real fender It is quite complicated three-dimensional shape of Rear Fender is made up wonderfully by 1 Piece The weak point is the back side It is quite messy after pasting the Carbon Seat on the back side of this model It's a little bit uneven and textured It is not the place to worry about, because there is no need to look at the back side after installation
When removing (installing) the rear fender, it is necessary to remove the exhaust system The Fender stops at three 5mm HexagonalScrew The screw on the reverse side of the Exhaust System has an Exhaust If the exhaust system is left on, the tool cannot reach it Removal Removed OEM Material:PlasticFender and TST's Fender side by side, as you can see, the TST's The design of the Edge is a little bit small and the Edge is sharp Because it is not a heavy part to begin with, the shape up effect is small, but the Fender of TST is about half the weight of the OEM Product (I didn't measure it)
Installation was easy and secure, and it fit perfectly into the original screw holes and stayed in place There is a notch in the shock part, and it does not interfere at all Although it has been changed to NITRONR1, but the large most of the rare shocks are large and durable Turn the exhaust system back on and the work is done
What do you think, Custom is just a functional part, not a dress-up! But when the Carbon fender came on, what a surprise! It's only carbon It's only Carbon However, I like this kind of thing, don't you, boy? I also like to use aluminum machined products This little grommet has finally become gorgeous Shiningly is cute By the way, TST has also released a Carbon Front Fender, but I don't have any plans for it I don't, because I think Red Fender is better in parenthesis But I think the quality is perfect for Front too Many of them are very expensive, so this TST product is not too expensive Custom parts for groms are always cheaper than for Large motorcycles! So it's a great place to play with things
Now, what's the key running fee Ring? It's not going to change To say the least, there was nothing wrong with it You can't see it while driving, so you forget it's even on However, I can assure you that you will be woo-bird every time you get off the bike If you're an engineering guy like me, who likes aluminum and titanium chunks, you'll love it! ! It's not a theory
View detail
Refreshingly nested and sharp looking!
It seems to be easy to install, and it was a big deal to fix it in place with the Bolt (I'm clumsy...)
When the installation is complete, you can see no ugly bolt holes, and the Refreshing is in the Large I'm delighted with the Sharp look! This is a recommendation for those who do not have any numbers in a circuit
View detail