Reviews
Decal Paste
The spacing was slightly out of alignment with the Decal on the CBR400R22 Tank. View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
Service manual required if you want to install it yourself….
I am a beginner of Custom, but when I bought it to install it by myself, I found that the contents of the Instruction Manual is almost the same as the Service Manual, and I think the level of difficulty is high. By the way, the manual costs about 15,000 yen.
I wish you'd say it first, Hon.
View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail
defective
It is perfect as a Grip heater.
However, there is a terrible flaw in that the Switch cover falls off due to vibration while driving.
Moreover, there are no replacement parts and the entire body must be replaced.
View detail
Poorly made so it floats.
The bolt and double-sided tape are used to secure the bolt, but the double-sided tape peeled off quickly due to poor workmanship. View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
Not satisfactory for the price.
I regret buying it, the box was not worth the extra cost of the Smart keySystem type.
Also, I have to push a little harder to close the lid until it locks into place. I suspect that it probably has something to do with the Packing on the inside groove of the lid that prevents water droplets from entering, but since I can't take the Packing off, the final cause is unknown.
I didn't know enough about myself, but even if you use the Smart keySystem type, you still need to carry the key with you in case of emergency after all, so the number of keys is not reduced.
I regret that I didn't spend this much money for a Smart keySystem type box because it is the same hassle to open with a button or with a key.
View detail
I purchased the wrong one.
I purchased the wrong product. View detail
The entire surface of the Rubber surface of the opened product is deteriorated to White.
The entire front and back of the Rubber front and back are White and muddy, as if the supposedly new item had been left unused for years.
(I can only assume Rubber is deteriorating)
It is not in a condition to be put on a very new car revel 1100 BlackTank.
The box was packaged inside as a quasi-positive part of Honda, but does the person in charge check the actual item before sending it?
Since I do not trust the product description (Net photo), I would like to purchase it again after checking the actual item at MotorcycleSHOP.
We will confirm the return by phone separately.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Honda CB400SB Main stand
Purchased on July 21
I bought a new car and the delivery date was too late in September.
Unopened, still in storage
On the day of delivery, the car was opened and temporarily assembled.
The hole in the standbody that fixes it to the vehicle body is deformed and pitted.
Shafts are not being inserted.
It's been over a month since I purchased it.
being in a state of crying oneself to sleep
It was a PointUPCampaign and I bought it early.
I wish I had bought it from Dealer.
I didn't know this was possible with OEM Parts...
View detail
The thing itself is good, though.
The product itself is good, but if you install it by yourself, it is not covered, even though it costs more than 100,000 yen. There is no Instruction Manual for installation.
Honda's recent decline in service is remarkable for vehicle bodies, but I didn't realize that the same is true for OEMOption products.
View detail
HONDA MONKEY KEYS
HELLO I have recived my keys order but the keys are not European standard . or if it com out of the photos it is not very clear and I can not choose the model of my HONDA MONKEY motorcycle . thank you . View detail
I'll ask the store to install it!
It is a Honda OEM, but the Installation Instruction Manual is unfriendly and has some errors, and the standard working time of 0.7 hours is a lie. It took me one whole day.
The Tap on the Screw hole was not good and the Nut was gnawed off.
In addition, what was more Large strange was the process of reinstalling the LeftBlinker.
This is not a problem with this component, but with the Rebel 1100 itself.
The blinker of REBEL1100 is made of rubber for the attachment to the shaft. The distance between the two is nearly 2.5 meters, and it is difficult to install without pulling on the rubber. What kind of work do you do in your store?
I gave up after almost half a day of trying and managed to make a JointBracket out of Stainless Steel flat plate and installed it. It does not interfere with the function or operation.
We heartily recommend that you ask a store to install the ScreenCowl on the REBEL 1100.
View detail
High!
To pay over $3,000 for something like this is ridiculous! View detail
Fits: HONDA CB250R, HONDA CT125 CT110 HUNTER CUB, HONDA CB250R, HONDA FORZA, HONDA Dio110, HONDA XL750 TRANSALP
Just a double-sided tape to attach ETC receiver/transmitter.
If I knew the necessary purpose of this component, I would not buy it. View detail
I can't install it!
As mentioned in the Review, the position of the Bracket was not correct and could not be installed. View detail
The rear blinker was scratched.
Blinker parts were scratched.
Apparently, the Carrier was slightly distorted, so it was in constant contact with the Right Blinker.
I was riding unnoticed and the scratches got deeper.
It sucks
View detail
Fits: HONDA DIO, HONDA TODAY, HONDA DIO CHESTA
Wrong shape, not usable.
It's the wrong shape, it's useless? You wasted Gold? View detail
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Anywhere else, it'd be half the price.
It's hard to tell because the picture is Image.
I wish I had included the CB350 in the list of compatible models.
View detail