Reviews
Fits: HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Safe and Secure OEM Parts
[How is it used?
Used to repair noise from around the Camshaft Chain, which is a common problem with this type of car.
How was your experience with it?
No problem since it is OEM Parts
How did it compare to other products?
OEM Parts, so you don't have to worry
[Points to note]
It takes time to peel off the old Gasket.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
Installation of Carrier
The product itself is a standard item, and it is a natural part to have, but when it comes time to install it, it can be a bit of a challenge.
First, a hole must be drilled through the Center bolt.
Without File or Leutor, this work cannot be done.
When removing the fork guard, the small claw is broken, which seems easy but is quite difficult.
If you are a Challenger who wants to do it yourself, for the experience.
You can try it.
If you buy a new car, do not hesitate to have the dealer install Option Parts.
Of course, a labor charge is required, but the work is more than worth the price.
The product itself is a good Large change and is indeed OEM Parts.
We hope this will be helpful to those who are in the process of purchasing a new car.
View detail
Fits: HONDA CRF250LDA-M, HONDA CRF250LA-M, HONDA CRF250LRD-M, HONDA CRF250LRA-M
Corresponds to the 2023 CRF250L (8BK-MD47)
The product arrived in bound condition, not in Copy.
The 2BK-MD47 (until 2022) was a Main book and the 8BK-MD47 (from 2023) was a set of two books in the form of Supplement.
I think it is essential for those who do maintenance and servicing. Demerit is a little expensive.
View detail
Fits: HONDA CRF250LDA-M, HONDA CRF250LA-M, HONDA CRF250LRD-M, HONDA CRF250LRA-M
Corresponds to 8BK-MD47
The one I received this time was properly bound.
As for the contents, the 2BK-MD47 was configured as a Main book, and the 8BK-MD47 was attached as a separate book.
There is not much that is different between 2BK and 8BK in terms of large size, but I think that many details have changed since they are included as a separate volume.
Service manuals are indispensable for doing maintenance and customization on your own.
It is a little expensive but I am glad I got it.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB1300 Superbordor, HONDA CB400 Super Boldor
Honda meter panel
Fits exactly like the original. The atmosphere of the instrument panel is much more luxurious after installation. I used alcohol to clean off any dirt or oil prior to installation. I am very satisfied. Recommended for those who ride the CB400 REVO. -------------------------------------------------- -------- Fits accurately like genuine. The atmosphere of the instrument panel is much more luxurious after installation. I removed dirt and oil cleanly before installation and installed it before installation. the CB400 Revo. Powered by Google Translator View detail
OEM
Installed on GB350S.
Originally, this was OEM parts for CB1100 and not for GB350S, but looking at the shape of the tank, we decided that there would be no problem and purchased it. Installation was very easy and no problems were encountered.
The adhesive is so strong that it cannot be reapplied. It is recommended to position it firmly before attaching.
Pad is not as thick as expected, about 2mm at most Large.
The body is a simple shape that fits in with any motorcycle.
Items more comfortable and satisfactory for GB350S than I expected.
View detail
OEM's sense of security ◎Evaluation depends on application?
■About Quality
There was no BALI, uneven paint, or Wobble, only HondaOEM.
About ■Design
I like it because of its simple, MINIMAL design, and I think it is good because it does not disturb the look of the car without the Rear box or Carrier base.
■ About performance
The largest load capacity is only 3 kg. If you want to put a large box, this product is not suitable for you. If you want to put a large box, this product is not for you.
About Pricing
As it is an OEM product and has undergone proper testing and development, it is inevitable that the price is a little high. This is not limited to Carrier, but it is for those who want to buy peace of mind, because the safety of using Carrier in Rule is an attraction that third-party products do not have.
View detail
Fits: HONDA Live DIO, HONDA JOKER Helmet, HONDA BROAD, HONDA GYRO CANOPY, HONDA CABINA, HONDA GYROUP, HONDA GYROX
Impressions of HondaOEM Parts
I installed it and have had no problems so far.
I bought it here because the price is lower than other Motorcycle stores.
View detail
![[MONKEY รุ่นฉลองครบรอบ 50 ปี] ตรา L. ถังน้ำมันเชื้อเพลิง](https://thimg-afcc.kxcdn.com/@wth-shop/assets/photos/review/16884763011688476301346.jpeg)
สามารถติดกลับถังได้อย่างพอดี View detail
![[MONKEY รุ่นฉลองครบรอบ 50 ปี] มาร์คถังน้ำมันเชื้อเพลิงจุดกึ่งกลาง ประเภท 1](https://thimg-afcc.kxcdn.com/@wth-shop/assets/photos/review/16880027601688002760679.jpeg)
สวยงามและลงตัวติดงานของแท้ View detail
You'll know it when you hold it.
Valentino Rossi loved the RossiGrip.
It is true that the RossiGrip has a chewy grip that other grips do not have. And yet, it does not interfere with the road surface information transmitted by the front wheel, and the Control can also operate the Accelerator with a moderate grip force.
The color is pure black and the design is not outstanding. It may look like a bland OEM product, but once you hold it in your hand, you can tell that it is a Grip with a special attention to detail.
View detail
If you are looking for something close to OEMDesign, you are in the right place!
The lever position can be adjusted to five positions.
The design is similar to OEM and can be combined with OEMClutch without any discomfort.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Fit nicely
Just fit on the meter panel and looks good. View detail
The Red component of rally has been increased.
The Black originally equipped on the RALLY is not bad either,
I wanted to increase the Red component and popped it in on impulse.
...Hand guard is now Red.
How was the $5,500 expense for just this?
View detail
Wow that's cool
The seat surface is a little higher, but the cushioning is better. Above all, the color is a good match with the car body. View detail
HondaOEMGrip
Used for Motoguzzi's 1100sport.
RossiGrip The HondaOEMGrip is nicknamed the "HondaOEMGrip".
I didn't want to be flashy, so I decided on this one right away.
I put it on and I'm convinced that VR continued to love it. I wish I had known about it earlier.
View detail
essential accessories
This product is an essential accessory for cb500x. Remove the left cowl to reveal the harness required for installation. Just remove the dummy cap and install it right away. The rear retaining nut must be tightened securely to prevent loosening. It is genuine Honda and the quality is very good. -------------------------------------------------- -------- This product is an essential accessory of CB500X. If you remove the left cow, you will see the harness needed for the installation. You can remove the dummy cap and install it right away. The rear fixing nut is tightly tightened so it will not be released. The quality is very good for Honda. Powered by Google Translator View detail
Fits: HONDA CBR250R (MC17/19), HONDA jade, HONDA VT250 INTEGRA, HONDA CB400TII CB400T, HONDA CB250, HONDA CB250, HONDA Hawk II CB400T, HONDA VT250F/Integra, HONDA CB250, HONDA Hawk II CB400T, HONDA VT250F/Integra
Buy for Spare
I think anyone can put it on without any problem. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Parenthesis OK
Installation was easier than expected.
I like the way it looks and Parenthesis has improved.
View detail
NC750X OEMUSB installed
[How is it used?
I forgot to order an OEMUSB when I took delivery, so I bought an additional one and use it to charge my phone.
Was the one you received as per Image?
It was Honda OEM.
How was your experience with it?
I thought the USBCap was slender in the picture, but it is easy to remove.
I would like to put a Cap on it for Walkman and others.
[Points to note]
I removed the cowl according to the instruction manual, fighting the fear that I might break the various nails.
I had a hard time removing the BlinkerHarness, too, because I couldn't figure out how to remove it.
How did it compare to other products?
It is very easy to use the power supply from the UniversalUSB power supply, as all you have to do is point the Harness.
It is rated at 15W 5V,3A, which is sufficient power.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail