Reviews
Careful packaging and fast delivery
I have received it well. Since it is a genuine part, there is no worry about the quality. The packaging was meticulous and the delivery was surprisingly fast. Now we are almost ready for winter. I am very satisfied that I can buy it during the sale period and receive it at a discount, and I can receive it sooner than if I ordered it in Korea. ------------------------------------------------------------ -------- I have received it well. It is not worry about the quality because it is genuine parts. The packaging was also meticulous and was surprisingly fast delivery. Now that you are ready for winter. It is very satisfied with librarian discounts in the sale period, and can be received faster than ordering in Korea. View detail
Cb650r 2021
Bought a few things from webike recently (I am in the uk) not been let down, this loom fits perfectly and is plug and play as expected with the Honda sports headed grips, perfect! View detail
I bought it cheap
Delivery was fast and I bought it because it was not officially imported from Korea, so I installed it without difficulty because it was made easy to understand how to install. ------------------------------------------------------------ Delivery was fast and I bought it because it was not officially imported from Korea. The installation method was made easy to understand, so I installed it without any difficulty. Just because of the nature of the cowl of Honda scooters, it is very difficult to disassemble the cowl and the paint may be broken. Powered by Google Translator View detail
Finally ready to use, happy
This wiring harness is to be used with the electric heating handle. This accessory can only be found on the instruction manual of the electric heating handle. It is recommended that this wiring harness be sold together with the electric heating handle. It is sold on webike. Now it can finally be used. There are a total of three heating gears, and the overall feeling is good. Sometimes the hands of the highest gear will still sweat, and the electric heating handle is still necessary. -------------------------------------------------------- The harness is to be combined with the use of electrically heated handles, this accessory only in the purchase of electric heating handle this specification can be found in the corresponding model, it is recommended that harness combined with electric heating to close the sale together, hard to find this, but fortunately, It has sold webike above. Now finally ready to use, with a total of third gear heating down overall feeling good, the hand will be sweating up a file sometimes use electric heating as well as the necessary income. Powered by Google Translator View detail
Fits: HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F
Necessary for Honda Grich
Attachment is required for the Honda Grip heater.
This VFR1200 can be installed in the NINJA1000.
I prepared the coupler because I branched the power supply from the position lamp.
It's been two years and so far it's working fine.
By the way, it's a Honda grich and a little low-throated, so it's been throttled.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor
With Grip heater and Set
Harness and Tying Band etc. necessary for attaching the Grip heater are set to the Set.
The detailed Instruction Manual on installation is attached to this Attachment.
Please note that Installation Instruction Manual is not attached to Grip Heater Body.
As the Instruction Manual details all the installation procedures carefully, "Removing Fuel Tank" , "Remove Side cover & Tail cowl" If these two can be done, I think that even an amateur will manage it.
It is also the first time to remove the Accelerator grip and Harness' s handling was difficult with gigging, but it took about 3 hours a day for 5 days (Total 15 hours) I did it, somehow attached.
By the way, when asking for installation at the Honda DREAM store, the labor charge is about 15,000 yen.
Given the labor and failure Risk, it may not be expensive at all.
Finally, we list the parts that were difficult to install and those that did not go to the Instruction Manual.
- "Remove Battery cover and drill a hole with Drill"
Since Bolt for removing Battery cover is in a very confusing place, we abandoned drilling and fixed the Grip heater Controller with Double-sided Tape only. (Self-responsibility)
- "Pass the Harness of Grip heater through the VinylBoots that protects the Couplers around Rear"
That's impossible.. How do you pass it?.
Since it can not be helped, we ignored the Boots and handled, and the exposed Coupler rolled the Vinyl Tape and protected it. (Self-responsibility)
- "Pass the Grip heater harness under the Frame"
Since Harness has several terminals as branches, it is very difficult to get the terminal caught and pass under the Frame as it is.
So, I used all the terminals in Harness as a thin Tying Band as shown in the picture so that I could connect to one.
With this I managed to walk around Harness.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor
Diversion to HORNET 250
I bought it to attach a Sports Grip heater to HORNET 250.
This Harness kit is designed to take power from the Coupler for the Blinker of the vehicle Rear, but it is different in shape from the HORNET 250 and can not be used as it is.
However, because there is a Coupler of Blinker relay in the same position, if you devise a bit, you can secure power by interrupt from there.
Also, because the branching position of Wiring that installs the Controller comes well around the Side cover in a nice way, you do not have to worry about installing the Controller.
It is self-responsibility to the last, I think that it is exactly good for diversion.
View detail
The heated grips attachment kit for the CB1100 is necessary for installing the heated grips. This accessory arrived quickly and well packaged. Ordering from Japan Webbike was easy and a good experience.
The heated grips attachment kit for the CB1100 is necessary for installing the heated grips. This accessory arrived quickly and well packaged. Ordering from Japan Webbike was easy and a good experience. View detail
Fits: HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA monkey, HONDA monkey
Just wanted bracket for clutch cylinder holder, but it is still a perfect product. Better for mount on naked bike's and scooter's mirror.
Just wanted bracket for clutch cylinder holder, but it is still a perfect product. Better for mount on naked bike's and scooter's mirror. View detail
Fits: HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring
If it thinks there at the beginning since the direction of others was carried out in the appropriation for VFR1200, it will purchase here in the state where it does not immediately obtain. Is the feature here the die length of a Cable too? Since th
If it thinks there at the beginning since the direction of others was carried out in the appropriation for VFR1200, it will purchase here in the state where it does not immediately obtain.
Is the feature here the die length of a Cable too?
Since the power source was taken from the Number light of CB1300SF, when it managed, there was a Cable of die length sufficient also by a GSX1300R HAYABUSA.
Reservation of the
power source has also been attached carefully [ an attached operation manual ] and comparatively easily.
I think whether since it is
, this is recommended when taking a power source by a rear side.
View detail