Reviews
Since it is genuine, it has a good fit and is sturdy.
The weather was cold in Korea, so I stored it after purchasing it and installed it when the weather warmed up a bit.
As expected, the screen is small, so it's not very effective in blocking wind noise, but it's great for dress-up. ^^
Installation is simple, so it's easy to do on your own, and the work time is quick.
However, since there are multiple screen rubber packings, it would be good to have a small explanation.
-------------------------------------------------- -------- The weather was cold, so I kept it after the purchase and the weather was released a little. After all, the screen is small, so it doesn't have a lot of effect, but it's the best for dress-ups. ^^ The installation is simple, so it's easy to do it alone and the working time is fast. However, there are several screen rubber packings, so it would be nice to have a small explanation. Powered by Google Translator
View detail
Without Honda Front carrier...,
Cannot be installed without HondaFront carrier.
However, I think the Design is very good.
I don't feel the windproof effect is very effective, I think Windshield, another company, would be more effective.
View detail
As a front carrier....
The front carrier is not large enough to do the job, and other companies' front carriers have a larger footprint.
I think
Designed for JA65, the Honda OEM Windshield cannot be installed without this Carrier.
However, after installing the Carrier/Windshield on the body, I think it looks very good on the CT110 HUNTER CUB.
I guess it depends on the individual, but I personally am very satisfied.
View detail
Machined and installed on JA55
JA55 cannot be installed without modification.
The difference from OEMPedal is that the length of the groove cut in the Spline is longer than OEM and the bend angle of the Pedal is different.
The processing performed was,
Cut the Spline section to the same length as the OEM with a sander and weld it.
When I stepped forward on Shift, Pedal hit the footpeg Arm, so I cut it down to the point where there was no interference.
I am concerned about the strength of the areas that have been cut away, so I would like to try and find a way to do this.
View detail
Necessary for maintenance
I'm worried about not having this when I need help with maintenance.
I was a little surprised to see it in 3D.
View detail
Loaded documents can be easily stored.
The Bolt 4 fixings can be secured with the upper lock and unlocked with the car body key.
The OEM Tool Box can easily hold a CALI card or Maintenance Notebook, which would otherwise have to be folded all the way down.
The Bracket also has a helmet lock function, but if a large box is installed in the Carrier, the key may interfere with the lock and make it impossible to open the box.
View detail
Required to fix side box
Required to install HondaOEMOption side box.
Merit, which can be opened and closed with the car body key because of the one-key system, is good, but the work of repeatedly inserting and removing six different tumblers into the key cylinder to assemble it is detailed and large and strange.
Perhaps because the Screw holes were painted, it was difficult to get Bolt into the Carrier holes.
Also, the price is pretty good for the quality, so I would have been happy if it was around 20,000 commissions.
View detail
Maintenance essentials
Maintenance necessities including Torque management
I have been stingy and gathered information on the web etc., but considering the accuracy of the information and the time involved, it is better to purchase.
I should have bought it earlier.
View detail
Blackout and good ♪
It is sold as an OEMOption for the CT110 HUNTER CUBJA65, but can be diverted to JA55 with no problem.
Since it is Foldable, it may be effective in Damage reduction when hitting Pedal on forest roads.
It is also painted in Blackout and is a delight as a Dress-up.
Snap Ring Pliers are necessary for the work. A pick tool or other tools may also be helpful when removing and attaching various springs.
New Split Pin and Snap ring are included.
View detail
Same as genuine
After purchasing the existing CT125, the change pedal was silver.
I was looking for WeBike because it didn't fit the tuning concept I wanted.
I ended up purchasing it.
First of all, the installation went without a problem, but the tabs on the fixing screws were slightly misaligned, so it felt like I had to force the screw to turn.
Satisfaction after installation is the best.
Attach photos. -------------------------------------------------- -------- The change pedal is silver after purchasing the existing CT125 I was looking for Webike because it didn't match the tuning concept I wanted. I bought it. Once installed, it was without a problem, but I felt that the screws of the fixed screw did not fit. After installation, satisfaction is the best. Attach photos. Powered by Google Translator
View detail
a good choice
Quality and texture information rubber is not secured It charges well for the feeling of use Goods to Buy Together 09-01-0001 Remove the installation difficulty light and connect the power source Cost performance and comparison with other products are more reliable than simple USB ports WeBike packaging is always great, arriving in a week for delivery and packaging Concern, precautions, or advice on purchase The USB port is broken, so I chose the cigar socket because I thought it would be difficult to replace it, so I could use it for a long time View detail
Fits: HONDA CB250R, HONDA CT125 CT110 HUNTER CUB, HONDA CB250R, HONDA FORZA, HONDA Dio110, HONDA XL750 TRANSALP
Only OEM is available.
I installed a security alarm on my CT125 when I took delivery of the car, but when I installed the drink holder, the alarm interfered with the drink holder, so I needed double-sided tape to move the alarm. At first I installed it with my Strong Double-sided Tape, but it peeled off after a few days, so I purchased this Double-sided Tape and installed it. It has been about a week since I installed it, and it has not peeled off. The adhesive glue has a different consistency.
There was an option to buy Double-sided Tape for Vehicle from OnLineShop, but we didn't think we needed that much, so we bought OEM.
Cost is a little high, but it is a recommendation for those who value reliability.
View detail
Don't break the Styling
The work is as simple as removing and installing two Hexagon Socket Bolts and two 10mm Bolts.
I was worried about interference because I had installed MORIWAKI's HornGuard, but I managed to attach it without hitting the headlight.
Manual was a spec. that said to read the QR code and check it yourself, but I worked with experience and intuition that it would only stick the way it was supposed to stick. The paint job is well done and I think it is a good product.
View detail
OEMOption
The entire product has a chic look with black painting compared to the silver OEM Product.
It is easy to miss the Bolt with Screw loosening inhibitor coated on the instructional bag.
The anti-loosening agent is applied quite thickly, so the initial screwing in is quite tight and makes me wonder if I screwed it in at an angle, but I don't seem to be worried about it coming loose.
The Bolt is at a point where I can barely access it with the Ratchet wrench with the Under Cover removed and Extension attached, so if I don't lift the Pedal, the Wrench will be applied at an angle and lick the corner of the Bolt.
Although there may be individual differences, the pedal on the down side is slightly more inward compared to the OEM, so I feel that it is more difficult to down on the heel.
Distortion and paint workmanship may not be a concern if you discount the fact that it is just moped parts, but this is one area where I wish Honda had done a little more work.
View detail
I like HONDA's RALLY Footpeg.
The footpeg has a wider foot placement surface than the standard footpeg, allowing the foot to stand on the foot.
GizaGiza is not so sharp, so it is gentle to Sole, and the touch of Shift is also comfortable, which may be the effect of Brushbo.
I recommend it because it is a category that is not difficult to replace.
The material is stainless steel, and the rust-resistant part is also invisible Fashion.
View detail
This Type is the Recommendation!
Carriers are available from various manufacturers, but no one recommends a type that is fixed to a light bracket. It can be broken even without loading.
This Carrier has a well thought out mounting area and looks fine.
Also, as shown in the photo, a Tachometer can be installed.
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
For peace of mind
I installed it on a Spur CUB110. Instruction Manual was included after installation, but
There is no Instruction Manual on how to wire. I had a little trouble, but I was able to install it.
I think you should take it easy and let Shop handle it.
Attachment is required for installation.
It is easy to use, just turn off the key and it will beep one minute later! A minute later, it will beep!
With the key ON
Release. I think it's safe to leave Motorcycle for a bit.
View detail
Socket Accessory instead of USB
It is Socket Accessory, not USB.
USB Type is available from other companies, but I chose this type to use Compressor.
Puncture repairs would be helpful.
View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
As expected
Installed on a CT125. There are many manufacturers, but I bought this one because I liked the shape best and the paint was well done. The price is a little high, but I am satisfied. View detail