Reviews
I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics
About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me. Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts. Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different. About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available. View detail
Tandem is going to be safe.
We are a couple in our 60's and take turns driving nc750x, but when we get on the rear seat, the seat surface of the rear of this motorcycle is small and there is no projection on the rear, so we have to put one arm around the rider's waist and the other hand on the side of the seat. It was not very stable even if I gripped the gripping part with my other hand. When the Rider was accelerated in the acceleration lane on the expressway, it almost swung off and I was in a cold sweat. This time, when I installed the Carrier and rode in the car, it was a very expensive purchase, and the Carrier was very stable in the rear and quantity of the buttocks.:Pair (for Left and Right) We are not planning to install a box or side case.
Now I can take my grandchildren for a ride with peace of mind.
View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail
Solid designed rear rack
About quality and texture, I can confirm that the quality is great and that the material used is steel tubing and plate where the welds have been smoothed out and painted with a satin black powder coated finish. About the feeling of use, Solid designed rear rack that allows for loading some additional items when taking a road trip and even looks good fitted to the Grom when unloaded. Products to buy together, To maximize your luggage storage capacity it would be ideal to add a side rack to your cart, Takegawa have one available that pairs the two together nicely. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and easy access to the four mounting points to secure the rack with the included hardware. Cost performance and comparison with other products, The pricing of the product is great. You receive a quality made rear rack with a solid design. Other brands offer higher priced options but I am satisfied with my choice of this cheap rear rack for the Grom. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
good
Honda genuine rear rack is good. Installation is easier than other products because only two bolts need to be fixed, and it is good because it is chrome-plated. View detail
OEM's sense of security ◎Evaluation depends on application?
■About Quality
There was no BALI, uneven paint, or Wobble, only HondaOEM.
About ■Design
I like it because of its simple, MINIMAL design, and I think it is good because it does not disturb the look of the car without the Rear box or Carrier base.
■ About performance
The largest load capacity is only 3 kg. If you want to put a large box, this product is not suitable for you. If you want to put a large box, this product is not for you.
About Pricing
As it is an OEM product and has undergone proper testing and development, it is inevitable that the price is a little high. This is not limited to Carrier, but it is for those who want to buy peace of mind, because the safety of using Carrier in Rule is an attraction that third-party products do not have.
View detail
This rear rack is more about the styling
About quality and texture, I can confirm that the quality is great and that the material used is steel tubing and plate with a chrome plated finish. About the feeling of use, This rear rack is more about the styling then the ability to carry loads. The chrome finish is the best choice for this bike and I am yet to even carry anything on it but the area is small and only rated for three kilograms. Products to buy together, To get the most use out of the rear rack if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a rear rack perfectly styled for the bike but it is the most expensive small capacity rack available. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Strong and durable
My motorcycle is HONDA X-ADV750. I bought the original rear shelf from webike. The original product is simple and elegant, exquisite workmanship, and excellent quality. All the screw holes are very close, very convenient installation, a little look at their own instructions said that it can be very good installation. Installation and car coordination, the original factory is incense. View detail
very nice
My motorcycle is HONDA X-ADV, I plan to install a tailbox for it, but I am not satisfied with the boxes of many brands, so I finally bought this original tailbox, which has a volume of 38 liters and can place a full helmet. The top cover is aluminum alloy, which looks more advanced, and the overall weight is not as heavy as that of aluminum boxes, so it is stable to install with the original tailframe. View detail
Original shelf
My motorcycle is HONDA FORZA350. I am going to install a tail box for the motorcycle. The rear shelves I saw on other websites were not so satisfactory. The original shelf sold by webike is reassuring. The original parts don’t have to worry about quality problems. It should be noted that this shelf can only be installed with the latest FORZA350, and the old models do not support it. -------------------------------------------------- -------- My motorcycle is Honda Forza350. I am going to install a tail box for the motorcycle. The shelves that I have seen on other websites before are not so satisfied. It is also reassuring the original shelves sold by Webike. It should be noted that this shelves can only be installed by the latest Forza350, and the old models do not support. Powered by Google Translator View detail
Sturdy factory rear shelf
My motorcycle is HONDA X-ADV750. I am going to install a rear box on this motorcycle. I have seen several sub-factory shelves on other websites before. The workmanship is not good, and I am afraid that it is not strong enough. I bought this webike. The original shelf is not comparable to that of the sub-factory. It is made of all aluminum alloy, strong and reliable, and the installation holes are precise. It can be installed with a 50L aluminum alloy tail box. -------------------------------------------------- -------- My motorcycle is HONDA X-ADV750. I am going to install the rear box of this motorcycle. I used to watch a few shelves on other websites before. The original shelves are not comparable to the deputy factory . The whole aluminum alloy is made, strong and reliable, and the hole is accurate. It can install a 50L aluminum alloy tail box. Powered by Google Translator View detail
The product had a little BALI for an OEM product, and it was attached after being covered with paper.
Seat locks a little stiff, must be pushed in hard to lock. View detail
practical shelf
My motorcycle is HONDA REBEL500. Since the storage space of the car is almost no, I am going to install a rack. After reading several models, I still feel that the original HONDA is reliable. This original rack did not disappoint me. , The installation is simple and fits perfectly. Or it can be combined with the backrest. It should be noted that the backrest must be installed together with the shelf and cannot be installed separately. -------------------------------------------------- -------- My motorcycle is Honda Rebel500. Since the car's storage space is almost there, I am going to install a shelf. After watching several models, I still feel that the original Honda is reliable. , Simple installation, strict silk joints. Or it can be combined with the back of the back. It should be noted that the back must be installed with the shelves and cannot be installed separately. Powered by Google Translator View detail
Honda NC750X 2021 Top box Oem Rear Rack
The rack looks sturdy. But is also light. Follow the instructions to install the rack. The Honda OEM Top Box fits nicely to this rack. It brings the Topbox nearer inward. View detail
Bike parts from Japan
First time I ordered from Japan. I am very satisfied!!! Everything went quick and fine. Thank You Webike!!! The holder are heavy and quality. View detail
Easy to use
[How is it used?
Installation of Rear Carrier
Was the one you received as per Image?
Perfect for OEM Product
Was the installation difficult?
Fixing Screw is a little stiff but easy
How was your experience with it?
Fit.
Installation Point or hang
Need a hexagonal 6mm. Something a little longer.
Availability and clarity of Instruction Manual
Installation can be done by simply turning the screw.
Cut ProtectFilm a little.
View detail
It is better to remove the Grab Bar before installing it.
The construction is solid and secure.
Since we wanted to install the Top box in a low position as shown in the photo, we selected the lowest Carrier, OEM.
(MonokeyGIVI but kept low due to use of UniversalBase)
Regarding installation
Without any preparation, I tried putting it directly on to the Grab Bar and the Bolt would not fit in one hole.
Then, after that.
The Grab Bar was removed and the Carrier was first temporarily fastened, then the Grab Bar with the Carrier temporarily fastened was attached to the car body and finally tightened.
The ease of installation is lowered by the fact that the parts are supposed to be OEM parts.
important point
If the grab bar is temporarily fastened during installation, it may cause the carrier to hit the tail cowl and cause injury, so care is required.
View detail
Poor accuracy
Small in design, it fits the MONKEY125's appearance effectively.
This point motivates the purchase
Therefore, I am satisfied.
However, the Clearance with the Blinker is different between the Right and the Left.
Right SideBlinker is for Levels where Clearance is uncertain.
Handled with protective Tape to prevent scratching
View detail
Reliable OEM Product
Installed on a 14 grom. The maximum allowable weight is 3kg, but it seems to be able to withstand more than that. It is well made, so it gives me a sense of security. I think it is an OEM product. View detail