Reviews
Decal Paste
The spacing was slightly out of alignment with the Decal on the CBR400R22 Tank. View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
Service manual required if you want to install it yourself….
I am a beginner of Custom, but when I bought it to install it by myself, I found that the contents of the Instruction Manual is almost the same as the Service Manual, and I think the level of difficulty is high. By the way, the manual costs about 15,000 yen.
I wish you'd say it first, Hon.
View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail
I purchased the wrong one.
I purchased the wrong product. View detail
The entire surface of the Rubber surface of the opened product is deteriorated to White.
The entire front and back of the Rubber front and back are White and muddy, as if the supposedly new item had been left unused for years.
(I can only assume Rubber is deteriorating)
It is not in a condition to be put on a very new car revel 1100 BlackTank.
The box was packaged inside as a quasi-positive part of Honda, but does the person in charge check the actual item before sending it?
Since I do not trust the product description (Net photo), I would like to purchase it again after checking the actual item at MotorcycleSHOP.
We will confirm the return by phone separately.
View detail
I'll ask the store to install it!
It is a Honda OEM, but the Installation Instruction Manual is unfriendly and has some errors, and the standard working time of 0.7 hours is a lie. It took me one whole day.
The Tap on the Screw hole was not good and the Nut was gnawed off.
In addition, what was more Large strange was the process of reinstalling the LeftBlinker.
This is not a problem with this component, but with the Rebel 1100 itself.
The blinker of REBEL1100 is made of rubber for the attachment to the shaft. The distance between the two is nearly 2.5 meters, and it is difficult to install without pulling on the rubber. What kind of work do you do in your store?
I gave up after almost half a day of trying and managed to make a JointBracket out of Stainless Steel flat plate and installed it. It does not interfere with the function or operation.
We heartily recommend that you ask a store to install the ScreenCowl on the REBEL 1100.
View detail
High!
To pay over $3,000 for something like this is ridiculous! View detail
The rear blinker was scratched.
Blinker parts were scratched.
Apparently, the Carrier was slightly distorted, so it was in constant contact with the Right Blinker.
I was riding unnoticed and the scratches got deeper.
It sucks
View detail
Not worth buying. Should be outside the company.
It's impossible.
It is OEM Product, so the quality is outstanding. There is no doubt about the texture, the compact appearance, the accuracy of the product, and the color harmony with the car body. We can say that it is better than any other products in this respect.
It is very easy to install, even I am an amateur, the installation time is about 10 minutes. The accuracy is that good.
If anyone can recommend it, is it someone who is not using it as a Rear Carrier and wants a SMART look?
Well, here's the thing:as the Title says, it's not worth buying in my personal opinion.
First of all, it doesn't reach the minimum required capacity as a Rear Carrier by any margin. What can be loaded with 3kg load capacity? If you are a person who put on the gear box, you can't load anything because the gear box itself becomes 3kg.
Also, even if you load a carrier bag with camping equipment, it will exceed 3kg. Even if it exceeds the load a little, it doesn't break. You should buy a large and solid rear carrier.
The price is much higher because it is an OEM product, and the cost performance is much lower than other brand products. It is crawling on the ground.
Moreover, it is too compact and processing is necessary when fixing the base of the Rear box. I don't know what the Rear Carrier is for.
If you're considering buying one, take a look at the Other Brand Product.
You can get great stuff for much less.
I would recommend this product to anyone who can buy this product with a proper purpose.
There is almost no influence when driving by the way. Although the load to the rear wheel increases slightly, it is almost the same. Drive with the same caution on rainy days.
Although it became the above-mentioned severe criticism, there is accuracy only in the OEM Product.
If you're buying for the right reasons, why not buy it?
View detail
seat cowl
I have not received my package and I am not satisfied with the webike service thank you for fixing the problem I will make a recourse on the web View detail