Reviews
Nothing beats OEM
Type to wrap around cheap Grip made by other companies. (12V) I bought the OEM Product because I was concerned that the Heater on the Axel side was gapping when I was using it. The OEM Product is not as warm as the 12V Wrap Around Type, which was warm enough to feel hot. Still, it is warm enough for my needs, and most importantly, the gripping feeling is the same as a normal gripping. Compared to other companies' products, it is troublesome to handle the wiring, but a connector for the Grip heater is provided on the car body side from the beginning, so the wiring is reflected. It is good that the standard connector can be used. View detail
Speedy delivery
Have been waiting for the dealer to get these in. They had no idea when to expect them to arrive. Ordered from this site and received them in a week, plus they were less expensive. Kind of easy set up. Just take your time and follow the directions. You have to scan the QR code on the packaging to download them . You also need the jumper switch to plug in during installation for the bike to recognize them. Once installed and setup you can unplug the jumper View detail
Material:Note that it is Plastic.
I thought it was cheap for an OEM, but I didn't expect Material:Plastic。
Although it takes longer to deliver, I feel it is better to buy one from another Manufacturer.
View detail
Knuckle guard and Extension
I referred to the Instruction Manual on the Manufacturer's website and was able to install it without any problems. View detail
Heated grips for Transalp 2023
Great merchandise, very easy installation with instructions provided. Original Honda OEM product, control from the motorcycle cockpit. View detail
Clutch Side inner diameter is too thick and does not fit at all.
The temperature control, the grip, and the length of the Harness are perfect. However, the inner diameter of the clutch side is too thick to fit even when the temperature is raised, and the molded rubber is shredded. The molded rubber was shredded. Even if I put my weight on it, the motorcycle would move so much that it would fall over, and it wouldn't fit. View detail
Quintessential OEM!
Grip diameter does not change from Large to Large, and feels almost the same.
When the output was set to the Largeest Large, the temperature rose to about LimitLarge sturdy with summer Gloves in early winter.
Since the side cowl must be attached and removed for installation, it is recommended that it be installed at the same time as the guard pipe is installed.
The negative part is that it is more labor intensive since the LeftRight Switch Box of the Handlebar is disassembled.
The Grip heater does not work just by attaching it. You must separately connect the scsCoupler to the Red Coupler under the Seat, then turn on the IG and enable it in the Meter Settings screen. (Description in the Installation Instruction Manual)
View detail
Fits: HONDA Dio 110, HONDA diocesan, HONDA TODAY., HONDA gyro canopy, HONDA monkey, HONDA PCX125, HONDA gyro canopy, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA diocesan, HONDA diocesan, HONDA diocesan, HONDA diocesan, HONDA Lead 110 (EX), HONDA monkey, HONDA monkey, HONDA monkey
HondaOEMGrip heater
Installed on HA-02 with no problem at all.
Since the Handlebar Cover was attached at the same time, it feels so hot that it is the strongest in the northern part of Tokyo about now.
Is it ok to wear summer Gloves inside for safety?
OEM Product is good for peace of mind.
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 110, HONDA Super Cub 50, HONDA Super Cub 110, HONDA Super Cub 50
Once you put it on, you can't take it off.
Effect of Grip heater.
This is an electric heating wire wrapped around the Handlebar Grip to warm the hands. In temperatures below 10℃, even if you wear thick gloves, your hands will get cold after about 20 minutes of riding.
Cold hands not only hinder operation but also make you lose interest in riding a motorcycle, so these are essential items for winter. 。
There is also a Universal Product for Other Brand Products, but it is set as an Option for each car. Grip heater is recommended to use OEM Option because you can get the benefit of exclusive harnesses with appropriate length and ControllerExclusive Bracketetetc.Exclusive Design.
I bought HONDAOEM.
good point
○○ Even with thin gloves, it is not cold.
○ It is helpful to be able to divert OEM Wiring.
○Easy to drive for long periods of time.
Bad Points Notes.
Remove the bolt and screw that hold the handlebar in place. It is very hard, so there is a possibility that it may be scratched.
Battery consumption will increase.
The installation is Large odd, but...
Grip heater warms the palms of your hands gradually, keeping your hands cool. 。 They are also useful not only in winter, but also in early spring and late fall when touring in the mountains.
The benefits are.
The Grip Heater Set comes with an easy-to-understand, illustrated Installation Instruction Manual, which should be followed.
Once you put it on, you can't take it off.
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Can be used for REBEL 250 and 500.
REBEL1100 is equipped from the beginning and can be used for REBEL250 and REBEL500.
The brake lever can be adjusted, but it looks slightly different from the clutch lever, which may bother finicky users.
View detail
defective
It is perfect as a Grip heater.
However, there is a terrible flaw in that the Switch cover falls off due to vibration while driving.
Moreover, there are no replacement parts and the entire body must be replaced.
View detail
Cl500 brake
My car is a CL500, and the genuine brakes are a bit big. There is no problem in using it, but I wish the distance between the dress-up and the steering wheel was a little closer. After searching a lot, I found that the lever without tuning was more expensive than I thought and I didn't really like it, so I went with the genuine tuning product Yajaster. I decided, I liked it more after looking at it. I was especially worried about installing the dial, but I learned it by watching YouTube and it was simple. I can control the distance well and can dress up. I recommend it. It doesn't upload. My car is a CL500 ------------ ----------------------------------------------- My car is a a little bit of the CL500 genuine brake, but I don't want to use the distance between the dress up and the handle. I searched a lot. I decided that I decided more because I was worried about the dial, but I learned to see the YouTube. Powered by Google Translator View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Essential for big bike
Adjustable brake lever should make it mandatory for big bike since braking is much more sensitive. Unexpected webike is selling cheaper than getting it from honda usa. View detail
If you are looking for something close to OEMDesign, you are in the right place!
The lever position can be adjusted to five positions.
The design is similar to OEM and can be combined with OEMClutch without any discomfort.
View detail
The Red component of rally has been increased.
The Black originally equipped on the RALLY is not bad either,
I wanted to increase the Red component and popped it in on impulse.
...Hand guard is now Red.
How was the $5,500 expense for just this?
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Good product!
I switched from a rebel250 to a rebel500. the brake lever was farther away than on the 250, so I replaced it with an adjustable type from Honda option. 2 steps forward is a good adjustment. Thank you very much. View detail
Choice of OEM
I like Parenthesis for Other Brand Product, but I choose OEM Product every time I buy an off-lease car.
Fits well and inexpensive No problem at least with stepping stones and branches.
View detail
It's literally a hot wire grip.
Purchased to install on a new vehicle.
The cold is almost over, but even on a warm day at dawn
There are times when my hands get cold. Honda genuine heated grip
Probably the same due to the nature of the parts that consume a lot of battery
I purchased the product manufactured by the company because I did not trust it more. -------------------------------------------------- -------- I bought it to mount it on a newly purchased vehicle. The cold is almost over, but even on a warm day, when it comes to dawn, Sometimes your hands are cold. Honda pure heat grip The same is due to the nature of the part that consumes a lot of batteries The products manufactured by the company have been purchased because they will not be more believed. Powered by Google Translator
View detail
Fits: HONDA CB1100, HONDA NC750S, HONDA NC750X, HONDA Forza Si, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA Forza300, HONDA Integra750, HONDA Silver wingGT600, HONDA Silver wingGT400, HONDA CBR400R, HONDA CBR650R, HONDA CBR400R, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR400R, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400F
The best helper in winter
My motorcycle is a HONDA CB400F. Keeping my hands warm while riding in the cold winter has always been a headache. I tried many methods before, but I was not satisfied. Until I saw this HONDA Sports heated grip on webike , This is the original part, the installation hole is precise, the original factory reserves the interface for direct plugging into the power supply, and there is no need to damage the circuit. -------------------------------------------------- -------- My motorcycle is HONDA CB400F. It has always been a headache in the cold winter riding hand. I have tried many ways before it is not satisfactory. Until I saw this Honda Sports heating grip on Webike, I saw this Honda Sports heating grip This is the original part of the factory, which is accurate to install the holes. The original factory reserves the directly inserted power supply without damage the line. Powered by Google Translator View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
comfortable trolley
My motorcycle is HONDA REBEL500. I bought this adjustable tie rod on webike. The original car tie rod has always felt less labor-saving. This tie rod solved my problem. HONDA original parts, Nissin OEM, Chinese OEM production, the workmanship is not bad, the installation is also simple, only need to remove a screw. -------------------------------------------------- -------- My motorcycle is Honda Rebel500. I bought this adjustable tie rod on Webike. The original car trolley always felt that it was not too laborious. This tie rod solved my problem. Honda original components, Japan -Qing Dynasty foundry, Chinese OEM produced, workmanship is not bad, and the installation is simple. You only need to remove one screw. Powered by Google Translator View detail